ACTFLAME Electric Wheelchair User Manual

1. Introduction

This manual provides essential information for the safe and effective use of your ACTFLAME Electric Wheelchair. Please read it thoroughly before operating the device. This electric wheelchair is designed to provide mobility assistance for adults, featuring a foldable design, powerful motors, and a comfortable control system.

2. Safety Information

Your safety is paramount. Adhere to all warnings and instructions to prevent injury or damage.

• Weight Capacity: Do not exceed the maximum weight capacity of 350 lbs (158 kg).
• Hazardous Materials: Transportation of this item is subject to hazardous materials regulations due to the battery. Consult relevant authorities for travel restrictions.
• Environmental Conditions: Avoid using the wheelchair in rain or wet conditions. Electronic components are not waterproof.
• Slope Limitations: The wheelchair is designed for safe climbing up to a 12-degree incline. Do not attempt to ascend or descend steeper slopes.
• Braking System: The off-controller instant braking system engages automatically when the joystick is released. Always ensure the handbrake is applied when stationary on an incline.
• Anti-Tipping Wheels: The anti-tipping wheels are a critical safety feature. Ensure they are properly installed and maintained to prevent backward tipping.
• Seat Belt: Always use the provided safety belt during operation.

3. Package Contents

Upon unpacking, verify that all components are present:

• ACTFLAME Electric Wheelchair Frame (pre-assembled)
• Joystick Controller
• Battery Pack (Lead-acid)
• Charger
• User Manual
• Safety Belt

4. Setup and Assembly

The ACTFLAME Electric Wheelchair is largely pre-assembled for ease of setup.

1. Unfolding the Wheelchair: Gently pull the frame apart until it locks into the open position. Ensure all locking mechanisms are securely engaged.
2. Attaching the Joystick Controller: The controller can be mounted on either the left or right armrest. Slide the controller into the designated slot until it clicks into place. Connect the controller cable to the corresponding port on the wheelchair frame.
3. Installing the Battery: Insert the battery pack into its compartment, ensuring a secure connection.
4. First Charge: Before initial use, fully charge the battery. Connect the charger to the charging port on the wheelchair and then to a standard electrical outlet. The charging indicator on the charger will show the charging status.

5. Operating Instructions

Familiarize yourself with the joystick controller and its functions.

5.1 Controller Functions

• Power Switch: Press to turn the wheelchair on or off.
• Battery Level Display: Indicates the current battery charge.
• Horn: Activates the horn for alerting others.
• Speed Adjustment Switch (+/-): Increases or decreases the wheelchair's speed.
• Mute Switch: Mutes audible alerts.
• SOS Button: Activates an emergency alert (functionality may vary, refer to specific model features).
• 360° Joystick: Provides precise control for movement in all directions. Push forward to move forward, pull back to move backward, and push left/right to turn. Releasing the joystick engages the automatic brake.

5.2 Driving the Wheelchair

1. Ensure you are seated comfortably and the safety belt is fastened.
2. Turn on the power using the power switch on the controller.
3. Select a suitable speed using the speed adjustment buttons. Start with a lower speed until you are comfortable with the controls.
4. Gently push the joystick in the desired direction of travel.
5. To stop, simply release the joystick. The wheelchair will brake automatically. For additional security, engage the handbrake.

5.3 Travel Range

The wheelchair offers a travel range of 15+ miles on a single charge, depending on terrain, user weight, and speed settings.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your wheelchair.

• Cleaning: Wipe down the frame and seating surfaces with a damp cloth. Avoid using abrasive cleaners or excessive water.
• Battery Care: Charge the battery regularly, even if the wheelchair is not in frequent use, to maintain battery health. Do not allow the battery to fully discharge for extended periods.
• Wheel Inspection: Regularly check the tires for wear and tear. The wheels are made of durable rubber material.
• Fasteners: Periodically check all bolts and screws to ensure they are tight.
• Motor Inspection: Listen for unusual noises from the dual 500W motors. Contact support if any issues arise.

7. Folding and Transport

The wheelchair features a foldable design for convenient storage and transport.

1. Ensure the wheelchair is powered off and the handbrake is engaged.
2. Remove the joystick controller and disconnect the battery if required for transport.
3. Follow the specific folding instructions provided with your model to collapse the frame. The wheelchair folds to a compact size, comparable to a 28-inch suitcase.
4. Once folded, it can be easily stored in a car trunk or a corner of a room.

8. Troubleshooting

Refer to this section for common issues and their potential solutions.

9. Specifications

Technical details for the ACTFLAME Electric Wheelchair.

10. Warranty and Support

For customer support, warranty information, or service inquiries, please contact ACTFLAME directly.

• Email Support: cs@actflame.com (24-hour response)
• Phone Support: +1 (831) 387-7981 (Mon-Sun 9AM-5PM EST)

Please have your model number (02-B Lead-acid Battery & Iron Frame) and purchase date available when contacting support.