EXTSUD Rechargeable Handheld Pinpointer Metal Detector User Manual

1. Introduction

Thank you for choosing the EXTSUD Rechargeable Handheld Pinpointer Metal Detector. This device is designed for precise detection of various metals, assisting in locating targets quickly and efficiently. Please read this manual thoroughly before operating the device to ensure proper use and optimal performance.

2. Product Overview

Key Features

• Rechargeable Battery: Convenient USB charging for extended use.
• 360° Detection: Provides all-around scanning for efficient target pinpointing.
• LED Light: Integrated light for improved visibility in low-light conditions.
• Waterproof Design: IP68 rated, fully submersible up to 10 feet (3 meters) for underwater exploration.
• Multiple Sensitivity Levels: Adjustable sensitivity to detect targets at various depths.
• Two Detection Modes: Choose between Vibration Mode and Vibration + Audio Mode.
• All-Metal Detection: Capable of detecting gold, silver, coins, iron, and other metallic objects.
• Portable Design: Compact with a belt holster and retractable hanging wire for easy transport.

Components

The EXTSUD Pinpointer includes the main detection unit, a belt holster, and a retractable hanging wire.

Figure 2.1: Key features including the rechargeable port, LED light, 360-degree detection capability, and the integrated case with a scraper.

3. Setup

3.1 Charging the Device

Before first use, fully charge the pinpointer. The device features a rechargeable battery.

1. Locate the charging port cover on the device.
2. Open the cover and connect a standard USB charging cable (not included) to the port.
3. Connect the other end of the USB cable to a suitable USB power source (e.g., computer, wall adapter).
4. The charging indicator will illuminate. Once fully charged, the indicator may change color or turn off, depending on the model.
5. Ensure the charging port cover is securely closed after charging to maintain waterproofing.

Figure 3.1: The pinpointer's rechargeable port, shown with a USB cable connected for charging.

3.2 Attaching the Belt Holster and Lanyard

For convenient carrying, attach the provided belt holster and retractable hanging wire.

1. Slide the pinpointer into the belt holster.
2. Attach the belt holster to your belt or backpack strap.
3. Secure the retractable hanging wire to the designated attachment point on the pinpointer and to your belt or clothing to prevent loss.

Figure 3.2: The pinpointer secured to a backpack using its belt holster and retractable hanging wire, demonstrating portability.

4. Operating Instructions

4.1 Powering On/Off

Press and hold the power button located on the side of the device to turn it on or off. The device will emit a short beep/vibration to indicate it is active.

4.2 Selecting Detection Modes

The pinpointer offers two detection modes: Vibration Mode and Vibration + Audio Mode.

• Vibration Mode: The device will vibrate when metal is detected.
• Vibration + Audio Mode: The device will vibrate and emit an audible tone when metal is detected.

To switch between modes, briefly press the power button while the device is on. The device will indicate the current mode through a specific sequence of vibrations or tones.

Figure 4.1: Illustration of the two available detection modes: Vibration Mode and Vibration + Audio Mode, suitable for various user preferences and environments.

4.3 Adjusting Sensitivity

The pinpointer features three sensitivity levels for detecting targets at different depths:

• Low Sensitivity: Detects up to approximately 1.5 inches (4 cm).
• Normal Sensitivity: Detects up to approximately 2.3 inches (6 cm).
• High Sensitivity: Detects up to approximately 5.2 inches (13 cm).

Refer to the device's specific instructions for how to cycle through sensitivity settings, typically by pressing the power button multiple times quickly after powering on.

Figure 4.2: The pinpointer's underground detection capabilities, illustrating three sensitivity levels and their respective detection depths.

4.4 Metal Detection

The EXTSUD Pinpointer is designed to detect all types of metals, including precious metals like gold and silver, as well as common items like coins and iron.

1. Once powered on and the desired mode/sensitivity is selected, slowly sweep the tip of the pinpointer over the area you wish to scan.
2. When metal is detected, the device will respond with vibrations and/or audio alerts, depending on the selected mode. The intensity of the alert may increase as you get closer to the target.
3. Use the 360° detection capability to pinpoint the exact location of the target within the soil or water.

Figure 4.3: The pinpointer's ability to detect various metals such as gold, coins, silver, and iron, indicating its broad utility.

4.5 Underwater Operation

The EXTSUD Pinpointer is IP68 rated, allowing for fully submersible operation up to 10 feet (3 meters). Ensure all covers, especially the charging port cover, are securely sealed before submerging the device.

Figure 4.4: The pinpointer being used underwater, highlighting its IP68 fully waterproof rating for aquatic adventures.

5. Maintenance

• Cleaning: After each use, especially in wet or dirty conditions, wipe the device clean with a damp cloth. For saltwater use, rinse thoroughly with fresh water.
• Storage: Store the pinpointer in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Recharge the device regularly, even if not in use for extended periods.
• Inspection: Periodically check the charging port cover and other seals for any signs of wear or damage to ensure waterproofing integrity.

6. Troubleshooting

7. Specifications

8. Warranty and Support

Information regarding product warranty and customer support was not provided in the product details. Please refer to the retailer or manufacturer's official website for specific warranty terms and contact information for support inquiries.

For further assistance, you may visit the EXTSUD brand page on Amazon.