1. Introduction
Thank you for choosing the INOVIVA Slushie Machine. This appliance is designed to effortlessly create a variety of frozen beverages, including slushies, frappes, milkshakes, and cocktails, without the need for pre-made ice. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and enjoyment of your new machine.
Figure 1.1: The INOVIVA Slushie Machine, ready to make delicious frozen drinks.
2. Important Safety Information
Please read all instructions carefully before using the appliance. Keep this manual for future reference.
- Sugar Content: All liquids added to the machine must have a sugar content exceeding 5%. Sugar substitutes are not applicable and will not aid in meeting the minimum sugar requirements for proper freezing. Insufficient sugar may cause the stirrer blade to make continuous rubbing noise, and the unit may turn off and restart automatically up to 6 times.
- Alcohol Content: When using the wine/cocktail preset, all premade inputs (wine, beer, etc.) shall contain between 2.8% and 16% alcohol.
- Liquid Preparation: Be sure to stir the mixture thoroughly before pouring it into the jar to ensure even consistency and proper freezing.
- Initial Setup: Before plugging in, allow the machine to stand upright for at least 2 hours. This allows the refrigerant fluid to settle, which is crucial for proper operation.
- Dispensing: Do not turn off the machine until all frozen drink has been dispensed.
- Power: Ensure the machine is plugged into a grounded outlet of the correct voltage.
- Children: Keep out of reach of children. Adult supervision is required during operation.
3. Product Overview and Components
The INOVIVA Slushie Machine is designed for ease of use and efficient frozen drink preparation. Key components include the main unit, transparent liquid jar, stirring mechanism, dispensing handle, and control panel.
- Capacity: 72 oz (approximately 2.1 liters)
- Weight: Approximately 29 pounds (13.15 kg)
- Dimensions: 19.09"D x 10.39"W x 19.29"H
- Control Panel: Features 5 preset programs (Slushie, Frappe, Milkshake, Cocktail, Wine), thickness adjustment, clean mode, lock/unlock, and power buttons.
- Drip Tray: Removable for easy cleaning.
Figure 3.1: Product dimensions and capacity details.
4. Setup
Follow these steps to set up your INOVIVA Slushie Machine for the first time:
- Unpack: Carefully remove all components from the packaging.
- Positioning: Place the machine on a stable, flat surface. Ensure there is adequate ventilation around the unit.
- Refrigerant Settling: Before plugging in, allow the machine to stand upright for at least 2 hours. This allows the refrigerant fluid to settle, which is crucial for proper operation.
- Assemble Components:
- Insert the stirring blade into the main unit.
- Attach the transparent liquid jar securely to the main unit.
- Place the drip tray at the bottom of the machine.
- Initial Cleaning: Before first use, clean all removable parts with warm soapy water. Refer to the "Maintenance and Cleaning" section for detailed instructions.
- Power Connection: Plug the machine into a suitable power outlet.
Video 4.1: INOVIVA Slushie Machine Installation and Cleaning Guide. This video demonstrates the assembly of components and initial setup steps.
5. Operating Instructions
The INOVIVA Slushie Machine offers a simple, one-touch operation for various frozen drinks.
- Prepare Liquid: Ensure your chosen liquid has a sugar content exceeding 5%. For alcoholic beverages, the alcohol content should be between 2.8% and 16%. Stir the mixture thoroughly before pouring.
- Pour Liquid: Open the lid of the liquid jar and carefully pour your prepared liquid into the machine. Do not exceed the MAX fill line.
- Select Program: Use the control panel to select one of the 5 preset programs:
- SLUSHIE: For classic slushies.
- FRAPPE: For thicker, coffee-based or similar frozen drinks.
- MILKSHAKE: For creamy, blended milkshakes.
- COCKTAIL: For frozen alcoholic cocktails like margaritas.
- WINE: For frozen wine drinks.
Note: The 2025 New Version Update includes optimized and lowered temperatures for all presets to achieve superior slushie results.
- Adjust Thickness (Optional): Use the "THICKNESS +" or "THICKNESS -" buttons to fine-tune the consistency of your frozen drink.
- Start: Press the Start button to begin the freezing process. The machine will automatically mix and freeze the liquid. Processing time typically ranges from 15 to 60 minutes, depending on the composition, volume, and starting temperature of the drink.
- Dispense: Once the drink reaches the desired consistency, pull the dispensing handle to pour your frozen beverage into a glass.
Figure 5.1: Simple 3-step process for making slushies.
Figure 5.2: Overview of the one-touch control panel with 5 preset programs.
Figure 5.3: Visual guide for liquid to slush conversion and content requirements.
Figure 5.4: Detailed table for required sugar content based on serving size.
Figure 5.5: Detailed table for required alcohol content based on recipe size.
6. Maintenance and Cleaning
Regular cleaning ensures the longevity and hygiene of your INOVIVA Slushie Machine. The machine features both a self-cleaning mode and easy disassembly for deep cleaning.
6.1 Self-Cleaning Mode
- After dispensing your drink, pour clean water into the liquid jar.
- Press the "CLEAN" button on the control panel. The machine will run a cleaning cycle.
- Once the cycle is complete, dispense the water into a container.
6.2 Deep Cleaning and Disassembly
For thorough cleaning, especially after making different types of drinks, follow these steps:
- Unlock: Unlock the rear handle of the liquid jar.
- Remove Parts: Carefully remove the liquid jar, stirring blade, and drip tray.
- Wash: Rinse all removable parts with warm water. These parts are also dishwasher safe for convenient cleaning.
- Wipe Main Unit: Use a damp cloth to wipe down the main unit and the internal freezing cylinder. Do not submerge the main unit in water.
- Dry: Ensure all parts are completely dry before reassembling.
- Reassemble: Reassemble the machine by attaching the stirring blade, then the liquid jar, and finally the drip tray. Ensure the rear handle is locked back into place.
Figure 6.1: Easy one-step disassembly for deep cleaning.
Figure 6.2: Cleaning options for removable parts, including hand wash and dishwasher compatibility.
7. Troubleshooting
If you encounter issues with your INOVIVA Slushie Machine, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine beeps once and shuts down without producing anything. | Insufficient sugar content in the liquid (below 5%). The stirrer blade may also make rubbing noise. | Ensure the liquid has a sugar content of at least 5%. Add 1-2 tablespoons of flavored syrup, juice, sugar, date sugar, coconut sugar, maple syrup, agave, simple syrup, or honey per serving. Combine additional sugar with the base prior to pouring into the container. Sugar substitutes are not effective. |
| Machine does not turn on. | Not properly plugged in; power outage; machine not settled after transport. | Check power connection and outlet. Ensure the machine has been upright for at least 2 hours before plugging in for the first time or after moving. |
| Drink is not freezing to desired consistency. | Incorrect sugar/alcohol content; liquid too warm; thickness setting too low. | Verify sugar content (>5%) and alcohol content (2.8%-16% for wine/cocktail). Use chilled liquids for faster freezing. Adjust the thickness setting using the control panel. |
| Unusual noises during operation. | Low sugar content (as mentioned above); parts not assembled correctly. | Check sugar content. Ensure the stirring blade and liquid jar are correctly installed and locked into place. |
If the problem persists after trying these solutions, please contact INOVIVA customer support for assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | inoviva |
| Model Name | S1.0-2015 |
| Item Model Number | S1.0 |
| Color | gray |
| Capacity | 72 Fluid Ounces (approx. 2.1 Liters) |
| Product Dimensions | 19.09"D x 10.39"W x 19.29"H |
| Item Weight | 29 pounds (approx. 13.15 kg) |
| Special Feature | Programmable, Self-Cleaning, No Ice Needed |
| Manufacturer | inoviva |
| Date First Available | February 9, 2025 |
9. Warranty and Support
INOVIVA is committed to ensuring your satisfaction. While specific warranty details are not provided in this manual, if you encounter any issues during use, please feel free to reach out to us. We are dedicated to providing prompt and satisfactory solutions.
For customer support, please refer to the contact information provided with your product packaging or visit the official INOVIVA website.
