Hooseng Dining Table Set for 4 (Grey & Black)

1. Introduction

Thank you for choosing the Hooseng Dining Table Set for 4. This set features a faux marble tabletop and four luxurious button-tufted chairs, designed for comfort and durability. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure a long-lasting and satisfying experience with your new dining set.

2. Safety Information

• Weight Capacity: Do not exceed the table load capacity of 250 lbs. Each chair has a load capacity of 300 lbs. Exceeding these limits may result in damage or injury.
• Assembly: Always follow the assembly instructions carefully. Improper assembly can lead to instability and potential hazards.
• Stability: Ensure all bolts and screws are tightened securely before use. Periodically check and re-tighten fasteners to maintain stability.
• Chair Use: Be cautious of tip-over risk when using chairs, especially with a 100° tilt angle. Avoid leaning back excessively.
• Placement: Place the dining set on a flat, stable surface. Avoid placing it near heat sources or in direct sunlight for prolonged periods to prevent material damage.
• Children: Keep children away from the assembly area. Small parts can be a choking hazard. Supervise children when they are using the dining set.

3. Package Contents

Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.

• 1 x Faux Marble Dining Tabletop
• 4 x Dining Chair Frames
• 4 x Chair Seat Cushions with Backrests
• Table Legs and Support Beams
• Hardware Pack (screws, bolts, washers, Allen wrench)
• Instruction Manual

4. Assembly Instructions

Assembly typically requires two adults. Please follow these steps carefully.

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface to prevent scratches. Refer to the parts list to identify each component.
2. Assemble Table Frame: Attach the table legs to the support beams using the provided hardware. Ensure all connections are finger-tightened initially.
3. Attach Tabletop: Carefully place the faux marble tabletop upside down on a protected surface. Align the assembled table frame with the pre-drilled holes on the underside of the tabletop. Secure the tabletop to the frame using the appropriate screws.
4. Assemble Chairs: For each chair, attach the seat cushion/backrest assembly to the chair frame. Ensure the H-shaped chair construction is correctly aligned for stability. Secure all connections with the provided hardware.
5. Final Tightening: Once all components are assembled, carefully turn the table and chairs upright. Systematically tighten all screws and bolts using the Allen wrench. Do not overtighten.
6. Check Stability: Gently rock the table and chairs to ensure they are stable and do not wobble. Adjust as necessary.

Figure 1: Product Dimensions and Load Capacities. Table: 47.24" L x 27.5" W x 31.1" H. Chair: 15.15" W x 14.7" D x 35.82" H.

5. Operating Instructions

Your Hooseng Dining Table Set is designed for everyday use in dining areas, kitchens, or living rooms. The chairs feature an ergonomic design with a 100° tilt angle for comfortable seating.

• Seating: Sit upright with your back against the chair's backrest for optimal support.
• Movement: When moving the table or chairs, lift them rather than dragging to prevent damage to the floor and the furniture.
• Space-Saving: The chairs are designed to fit neatly under the table, optimizing space when not in use.

Figure 2: The Hooseng Dining Table Set in a contemporary kitchen environment.

6. Maintenance and Care

Proper care will extend the life and appearance of your dining set.

• Tabletop Cleaning: The faux marble tabletop is easy to clean. Wipe spills immediately with a soft, damp cloth. For general cleaning, use a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could damage the surface.
• Chair Cleaning: The button-tufted chairs can be cleaned with a soft, damp cloth. For tougher stains, a mild fabric cleaner suitable for upholstery can be used. Test on an inconspicuous area first. Vacuum regularly to remove dust and debris.
• Frame Care: Wipe metal frames with a soft, dry cloth. Avoid using water directly on metal parts to prevent rust.
• Protection: Use placemats or coasters to protect the tabletop from hot items, scratches, and spills.
• Foot Protectors: The chairs are equipped with foot protectors to prevent floor scratches. Ensure these are intact and replace if worn.

Figure 3: The faux marble tabletop, showcasing its texture and easy-to-clean surface.

Figure 4: The luxurious button-tufted dining chair, designed for comfort and stability.

7. Troubleshooting

• Wobbling Table/Chairs: Check all bolts and screws. Re-tighten any loose fasteners. Ensure the furniture is on a level surface.
• Scratches on Tabletop: Minor scratches on the faux marble can sometimes be minimized with a specialized furniture polish or repair kit. For significant damage, contact customer support.
• Stains on Chairs: Address stains promptly. Blot, do not rub. Use a mild fabric cleaner as directed in the Maintenance section.

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Hooseng website. If you have any questions or require assistance with assembly or parts, do not hesitate to contact our customer service team.