EYYTHUNG Wood Bar Stools (3 PCS, 24-inch, Black)

Introduction

Thank you for choosing EYYTHUNG Wood Bar Stools. This manual provides essential information for the safe assembly, proper use, and maintenance of your new bar stools. Please read these instructions carefully before assembly and retain them for future reference.

Safety Information

• Weight Limit: Do not exceed the maximum weight capacity of 300 pounds (136 kg) per stool. Exceeding this limit may result in damage to the stool or personal injury.
• Assembly: Ensure all parts are correctly assembled and tightened before use. Periodically check and re-tighten all fasteners to maintain stability.
• Stability: Place stools on a flat, level surface to prevent tipping. Avoid standing on the stools.
• Children: Keep children away from the assembly area. Small parts may pose a choking hazard. Supervise children when they are using the stools.
• Movement: Always lift the stool when moving it; do not drag, as this can damage the legs or floor.

Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.

• Stool Seats (3)
• Stool Backrests (3)
• Stool Legs (12)
• Footrest Bars (12)
• Assembly Hardware (screws, washers, Allen wrench)
• Floor Protectors (12)

Assembly Instructions

Assembly of each stool can be completed in a few minutes. Follow these steps carefully:

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches.
2. Attach Backrest to Seat: Align the backrest with the pre-drilled holes on the seat. Secure it using the provided screws and Allen wrench. Do not overtighten.
3. Assemble Legs and Footrests: Attach the four legs to the underside of the seat, ensuring they are oriented correctly. Insert the footrest bars between the legs, securing them with the appropriate hardware. Ensure all connections are snug but do not fully tighten yet.
4. Final Tightening: Once all components are loosely assembled, place the stool upright on a flat surface. Apply gentle downward pressure to ensure all parts are seated correctly, then fully tighten all screws.
5. Install Floor Protectors: Optionally, attach the included floor protectors to the bottom of each leg to prevent scratches on your flooring.

Usage Guidelines

To ensure comfort and longevity of your EYYTHUNG bar stools, please observe the following:

• Proper Seating: Sit centrally on the seat with your back against the curved backrest for optimal support.
• Foot Placement: Utilize the footrest bars for comfortable foot placement, which also adds to the stool's stability.
• Weight Distribution: Distribute your weight evenly when sitting. Avoid leaning excessively to one side or standing on the stool.

Maintenance and Care

To keep your EYYTHUNG bar stools in excellent condition, follow these simple care instructions:

• Cleaning: Wipe the smooth surface with a damp cloth. For stubborn marks, use a mild soap solution and dry immediately with a clean cloth. Avoid abrasive cleaners or harsh chemicals.
• Spills: Clean spills immediately to prevent staining or damage to the wood finish.
• Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or cracking of the wood.
• Heat and Moisture: Keep stools away from direct heat sources and areas of high humidity.
• Regular Checks: Periodically inspect all screws and connections and tighten them as needed to ensure the stool remains sturdy.

Troubleshooting

Refer to the table below for common issues and their solutions:

Specifications

Warranty and Support

EYYTHUNG products are manufactured with quality and care. For any questions, missing parts, or concerns regarding your bar stools, please contact EYYTHUNG customer support through the retailer's platform or the official brand website. Please have your purchase details and model information ready when contacting support.