Blooming NB-R1060TE Smart Bidet Toilet Seat

1. Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Blooming NB-R1060TE Smart Bidet Toilet Seat. Please read this manual thoroughly before installation and use, and retain it for future reference.

2. Safety Information

Observe all safety warnings and instructions to prevent injury or damage. Ensure the bidet seat is connected to a properly grounded electrical outlet. Do not immerse the unit in water. Disconnect power before cleaning or servicing. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

3. Product Features

The Blooming NB-R1060TE Smart Bidet Toilet Seat offers a range of features designed for enhanced hygiene and comfort:

• Dual Nozzle System: Separate nozzles for Rear (Family wash) and Front (Woman wash) cleansing.
• Advanced Nozzle Cleaning: Includes self-nozzle cleaning after each use, SMART nozzle cleaning during idle periods, one-touch remote cleaning, and 360° water cleaning for thorough hygiene.
• Adjustable Wash Modes: Oscillating and gentle massage pulse options, with back-and-forth nozzle position adjustment via remote control.
• Warm Water Wash: Provides a comfortable cleansing experience.
• Warm Air Dryer: Reduces the need for toilet paper.
• Heated Seat: Offers comfort, especially in colder environments.
• Ambient Nightlight: Illuminates the toilet bowl for convenience during nighttime use.
• Smart Eco-Mode: Analyzes user patterns to optimize energy saving, automatically switching to power-saving mode when not in use.
• Water Tank Drainage: A simple remote button allows draining of stored water for fresh water replenishment.
• Gentle Close Seat and Sittable Lid: Designed for durability and quiet operation.

Image: Overview of Blooming NB-R1060TE features including warm water wash, dryer, heated seat, and dual nozzle system.

Image: Detailed view of the dual nozzle system, showing separate nozzles for family wash and feminine cleansing, a detachable nozzle head for easy cleaning, and the self-cleaning function.

4. Installation Guide

Installation typically takes around 10 minutes. Follow these steps carefully:

1. Separation of Existing Seat: Remove your current toilet seat from the toilet bowl.
2. Fixing Installation Kit: Place the mounting plate onto the toilet bowl. Secure it by inserting the mounting bolts through the toilet holes and fastening them with rubber grommets, washers, and nuts from underneath.
3. Connecting the Bidet Seat: Slide the Blooming bidet seat onto the fixed mounting plate until it clicks securely into place. Ensure the grooves on the underside of the seat align with the mounting plate.
4. Connecting the Water Hose: Install the T-valve to your toilet's water supply line. Connect one end of the provided water hose to the T-valve and the other end to the inlet on the bidet seat. Hand-tighten connections, then use a wrench for a final snug fit, being careful not to overtighten.

Image: Visual guide for installing the bidet seat, detailing the four main steps: removing the old seat, securing the mounting plate, attaching the bidet seat, and connecting the water supply.

Image: Product dimensions for the elongated model and a visual representation of the included installation kit components.

5. Operation

The Blooming NB-R1060TE is operated via a wireless remote control and a side panel control. Familiarize yourself with the functions of each button.

Remote Control and Panel Functions:

Image: Layout of the wireless remote control and the bidet seat's side panel control, indicating button locations.

Image: A comprehensive guide to the bidet's functions, showing icons and their corresponding descriptions for features like cleansing, drying, massage, and temperature adjustments.

• Power ON/OFF: Press and hold the button for 4 seconds to power off.
• Cleansing (Posterior Wash): Activates the rear wash function.
• Bidet (Feminine Wash): Activates the front wash function.
• Dryer: Initiates the warm air drying cycle.
• Stop: Halts any active wash or drying cycle.
• Auto Clean: Performs a wash-to-dryer cycle with a single button press.
• Massage: Provides strong and weak water streams for a pulsating massage effect.
• Auto Drain: Drains the water from the internal tank.
• LED Night Light: Activates or deactivates the night light.
• Water Temp: Adjusts the temperature of the wash water.
• Seat Temp: Adjusts the temperature of the heated seat.
• Auto Eco Mode: Maintains water and seat temperature at 86°F (30°C) for energy efficiency.
• Smart Eco Mode: Analyzes user time zones to intelligently control heated seat and water temperatures for optimal energy saving.
• Water Pressure & Dryer Temp: Adjusts the intensity of water pressure and the temperature of the dryer.

Heated Seat Function

Soft Close Feature

Nightlight Function

Warm Air Dryer

6. Maintenance

Regular maintenance ensures optimal performance and hygiene of your bidet seat.

• Nozzle Cleaning: The bidet features automatic self-cleaning of the nozzles before and after each use. For additional cleaning, use the one-touch nozzle cleaning function via the remote control. The nozzle head is detachable for manual cleaning if necessary.
• Water Tank Drainage: Utilize the 'Auto Drain' function on the remote control periodically to drain stagnant water from the internal tank and replenish it with fresh water.
• Exterior Cleaning: Wipe the exterior surfaces of the bidet seat with a soft, damp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could damage the finish.
• Filter Maintenance: Check the water inlet filter periodically for any debris or sediment. Clean or replace as needed to maintain proper water flow.

7. Troubleshooting

If you encounter issues with your Blooming NB-R1060TE, refer to the following common solutions:

• No Power: Ensure the power cord is securely plugged into a grounded outlet. Check the circuit breaker.
• No Water Spray: Verify that the water supply valve is fully open and the water hose is correctly connected. Check if the water inlet filter is clogged.
• Water Temperature Not Changing: Confirm that the water heater is turned on (if applicable) and adjust the water temperature setting via the remote control. Allow a few moments for the temperature to stabilize.
• Seat Not Heating: Ensure the heated seat function is activated and the seat temperature is set to your desired level.
• Remote Control Not Responding: Check and replace the batteries in the remote control. Ensure there are no obstructions between the remote and the bidet seat's sensor.
• Leaks: Tighten all water connections. If leaks persist, contact customer support.

For issues not listed here, or if troubleshooting steps do not resolve the problem, please contact Blooming customer support.

8. Specifications

9. Product Video

Watch this official product video for a visual overview of the Blooming Smart Bidet Toilet Seat's features and benefits.

10. Warranty and Support

Blooming products are manufactured with quality and reliability in mind. For warranty information, product registration, or technical support, please refer to the documentation included with your purchase or visit the official Blooming website. Keep your purchase receipt as proof of purchase for warranty claims.

For direct assistance, you may contact NCM Co Ltd, the manufacturer, through their official support channels.