1. Product Overview
The Uttermost 21389 Crystal Stick Chandelier is a classic regal lighting fixture designed to enhance interior spaces. It features a warm brass finish and sparkling glass rods arranged in three heights around a scalloped center ring, creating a graceful visual effect. This chandelier requires 8 candelabra-base bulbs (60 Watt Max, not included) and is supplied with a 20-foot wire, three 12-inch stems, and one 6-inch stem for adjustable installation height.
- Finish: Warm Brass
- Lamp Type: Incandescent (Candelabra Sockets)
- Material: Steel frame with Glass rods
Figure 1: Uttermost 21389 Crystal Stick Chandelier. This image displays the chandelier's overall design, highlighting the warm brass frame and the arrangement of clear glass rods.
2. Safety Information
Please read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that can cause injury or property damage.
- WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- This fixture is intended for indoor use only.
- Ensure the mounting surface can support the weight of the fixture (approximately 35.2 pounds).
- Do not exceed the maximum wattage specified for the bulbs (8 x 60 Watt Max Candelabra).
- Handle glass components with care to prevent breakage and injury.
3. Package Contents
Carefully unpack all components and check for any damage. Retain all packaging materials until you are satisfied with the product. Verify that all parts listed below are present.
- Chandelier Frame Assembly
- Glass Rods (various heights)
- Mounting Hardware (crossbar, screws, wire nuts)
- Canopy
- Chain/Stems (three 12-inch stems, one 6-inch stem)
- 20-foot Electrical Wire
- Instruction Manual (this document)
4. Setup and Installation
Professional installation is recommended for this fixture. Ensure power is disconnected at the circuit breaker before proceeding.
4.1 Pre-Installation
- Turn off electricity at the main fuse box or circuit breaker.
- Carefully remove the old fixture and disconnect all wiring.
- Unpack the new fixture and lay out all parts on a clean surface.
4.2 Mounting the Fixture
- Attach the mounting crossbar to the outlet box using the provided screws.
- Determine the desired hanging height and assemble the appropriate combination of 12-inch and 6-inch stems. Securely attach them to the chandelier frame.
- Thread the electrical wire through the stems and canopy.
- Lift the fixture and make electrical connections:
- Connect the fixture's black wire to the house's black (hot) wire.
- Connect the fixture's white wire to the house's white (neutral) wire.
- Connect the fixture's ground wire to the house's ground wire (bare copper or green).
- Secure all connections with wire nuts and wrap with electrical tape.
- Carefully tuck all wires into the outlet box.
- Secure the canopy to the mounting crossbar, ensuring it sits flush against the ceiling.
4.3 Installing Glass Rods and Bulbs
- Carefully insert each glass rod into its designated slot on the chandelier frame. Ensure they are securely seated.
- Screw 8 candelabra-base (E12) incandescent bulbs (not included, 60 Watt Max each) into the sockets. Do not overtighten.
Figure 2: Detail of the chandelier's frame, showing the warm brass finish and the structure where glass rods are inserted. This view helps in understanding the assembly process for the decorative elements.
5. Operation
Once installation is complete and all connections are secure, restore power at the circuit breaker.
- Turning On/Off: Operate the chandelier using the wall switch connected to the fixture's circuit.
- Dimming: This fixture is compatible with dimmer switches. Ensure you use incandescent-compatible dimmer switches and bulbs.
- Bulb Replacement: Always turn off power at the circuit breaker before replacing bulbs. Allow bulbs to cool completely before touching. Replace with E12 candelabra-base bulbs, not exceeding 60 watts per bulb.
6. Maintenance
Regular maintenance will help preserve the appearance and functionality of your chandelier.
- Cleaning: Turn off power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the metal finish. For glass rods, use a glass cleaner applied to a cloth (not directly to the fixture) to avoid damaging the finish. Do not use abrasive cleaners or polishes.
- Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Lights flicker. |
|
|
| Glass rods are loose. |
|
|
8. Specifications
| Brand | Uttermost |
| Model Number | 21389 |
| Product Dimensions | 38.75"L x 38.75"W x 31.25"H |
| Item Weight | 35.2 Pounds |
| Finish Type | Brushed (Warm Brass) |
| Shade Material | Glass |
| Number of Light Sources | 8 |
| Light Source Type | Incandescent |
| Bulb Base | E12 (Candelabra) |
| Max Wattage per Bulb | 60 Watts |
| Voltage | 120 Volts (AC) |
| Mounting Type | Ceiling Mount (Semi Flush Mount) |
| Indoor/Outdoor Usage | Indoor |
| Assembly Required | Yes |
9. Warranty and Support
Uttermost products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official Uttermost website.
For technical support, replacement parts, or any inquiries regarding your Uttermost 21389 Chandelier, please contact Uttermost customer service through their official channels. Always provide your model number (21389) when seeking support.
Uttermost Official Website: www.uttermost.com