Redfire BT18 Bluetooth Intercom User Manual

1. Introduction

Thank you for purchasing the Redfire BT18 Bluetooth Intercom. This device is designed to provide clear and reliable communication for motorcycle riders, enhancing safety and enjoyment during your rides. Featuring advanced Bluetooth 5.4 technology, noise cancellation, and long battery life, the BT18 ensures a superior audio experience.

2. Safety Information

Please read all safety warnings and instructions carefully before using this product to ensure safe operation and prevent damage. Keep this manual for future reference.

• Do not attempt to disassemble or modify the device.
• Keep the device away from extreme temperatures, humidity, and corrosive substances.
• Ensure the device is securely mounted to your helmet before riding.
• Do not operate the device in a manner that distracts you from riding safely.
• Always be aware of your surroundings, even when using the intercom.

3. Package Contents

Verify that all items listed below are included in your package:

• Redfire BT18 Main Unit
• Wired Earphones
• Hard Microphone
• Soft Microphone
• USB Type-C Charging Cable
• Screw Clip
• Velcro Clip
• Earphone Velcro Pads
• Microphone Velcro Pads
• Screws
• Driver (Hex Key)
• Japanese User Manual

Image: Contents of the Redfire BT18 package, including the main unit, microphones, cables, and mounting accessories. Also shows two methods for installation.

4. Product Overview

The Redfire BT18 features a sleek, aerodynamic design. Key components and controls are as follows:

Image: Front view of the Redfire BT18 intercom unit, highlighting its buttons and LED indicator.

• Power/Multi-function Button: Used for power on/off, pairing, and call management.
• Volume Up/Next Track Button: Increases volume or skips to the next song.
• Volume Down/Previous Track Button: Decreases volume or goes to the previous song.
• Microphone Port: Connects the included microphone.
• Type-C Charging Port: For charging the device.

5. Setup

5.1 Charging the Device

Before first use, fully charge the BT18. Connect the supplied USB Type-C cable to the charging port on the device and a compatible USB power source. A full charge takes approximately 2.5 hours.

Image: Illustrates the 1500mAh battery capacity, providing 40 hours of intercom talk time and 50 hours of music playback. Also shows compatibility with various helmet types.

5.2 Installing on Helmet

The BT18 can be installed using either the screw clip or the velcro clip, depending on your helmet type and preference. Choose the appropriate microphone (hard mic for open-face/modular helmets, soft mic for full-face helmets) and attach it to the intercom unit.

1. Attach the chosen clip to the side of your helmet.
2. Slide the BT18 main unit onto the clip until it clicks into place.
3. Route the earphone wires and microphone wire inside the helmet lining.
4. Secure the earphones inside the helmet's ear pockets using the provided velcro pads.
5. Position the microphone close to your mouth for optimal voice pickup.

Image: Detailed steps for installing the intercom unit onto a helmet using both screw and velcro clip methods.

6. Operating Instructions

6.1 Power On/Off

• Power On: Press and hold the Power/Multi-function button for approximately 3 seconds until you hear a voice prompt.
• Power Off: Press and hold the Power/Multi-function button for approximately 3 seconds until you hear a voice prompt.

6.2 Bluetooth Pairing (with Phone/GPS)

1. With the device powered off, press and hold the Power/Multi-function button for about 5 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
2. On your smartphone or GPS device, enable Bluetooth and search for "Redfire BT18".
3. Select "Redfire BT18" from the list of available devices to connect. Once connected, the LED will flash blue slowly.

6.3 Intercom Communication

The BT18 supports stable 2-person simultaneous communication up to 1000 meters in open environments. It features automatic reconnection if the connection is temporarily lost within range.

Image: Depicts two riders communicating via the BT18 intercom over a distance of 1000M, and highlights the Hi-Fi audio and CVC/DSP noise reduction features.

6.4 Universal Connectivity

The BT18 is designed with strong compatibility, allowing connection not only with other Redfire intercoms but also with other brands of intercoms, navigation systems, and mobile phones via Bluetooth.

Image: Shows the BT18 connecting to various Bluetooth devices including other intercoms, smartphones (iPhone, Android), navigation systems, and transceivers.

6.5 Phone Calls

• Answer Call: When a call comes in, it will automatically answer after approximately 10 seconds.
• End Call: Briefly press the Power/Multi-function button.
• Reject Call: Press and hold the Power/Multi-function button for 2 seconds.

Image: Demonstrates voice command functionality, the ability to connect to two smartphones simultaneously, the 10-second automatic call answering feature, and automatic communication reconnection.

6.6 Music Playback & Sharing

Enjoy high-fidelity audio with the 40mm speakers and support for AAC/SBC codecs. The BT18 also allows music sharing between two same-model BT18 units within a 10-meter range.

• Play/Pause: Briefly press the Power/Multi-function button.
• Next Track: Briefly press the Volume Up button.
• Previous Track: Briefly press the Volume Down button.

6.7 FM Radio

The BT18 includes an FM radio function, allowing you to receive FM broadcasts nationwide in Japan. Tune in to news, weather, traffic information, or sports broadcasts.

Image: Illustrates the FM radio function with frequency display, music sharing between two helmets, and the IP67 waterproof rating with riders in various weather conditions.

6.8 Voice Assistant

The BT18 supports Siri (iOS) and Android voice assistants. To activate, press and hold the Multi-function button for 2 seconds while in standby mode.

7. Maintenance

To ensure the longevity and optimal performance of your Redfire BT18 intercom, follow these maintenance guidelines:

• Cleaning: Wipe the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
• Charging: Charge the device regularly, even if not in use, to maintain battery health.
• Water Exposure: While IP67 rated, avoid prolonged submersion. Ensure the Type-C port cover is securely closed when not charging.

8. Troubleshooting

If you encounter issues with your Redfire BT18, refer to the following common problems and solutions:

9. Specifications

10. Warranty and Support

This product comes with a 1-year quality warranty from the date of purchase. If you experience any issues or defects with the product, please contact our customer service for prompt assistance.

How to Contact Support:

Navigate to "Account Service" > "Order History" > "Seller" > "Contact Seller" on the platform where you purchased the product.