Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Cub Tik 12" 20V Cordless String Trimmer. Please read this manual thoroughly before first use and keep it for future reference.
Safety Information
Always wear appropriate personal protective equipment (PPE) including eye protection, long pants, and sturdy footwear when operating the trimmer. Keep bystanders, especially children and pets, at a safe distance. Ensure the battery is removed before performing any maintenance or adjustments.
- Read all instructions before use.
- Do not operate in wet conditions.
- Keep hands and feet away from the cutting line.
- Inspect the area for debris before trimming.
- Use only Cub Tik approved replacement parts and accessories.
Package Contents
Verify that all items are present upon unpacking:
- Cub Tik 12" 20V Cordless String Trimmer
- 2 x 20V 2.0Ah Lithium-Ion Batteries
- Fast Charger
- 8 x Spool Trimmer Lines
- 1 x Spool Cap
- Edger Guide Wheel
- Adjustable Auxiliary Handle
Image: Complete package contents including the trimmer, batteries, charger, and extra line spools.
Setup and Assembly
- Assemble the Shaft: Open the tri-fold pole and connect the three sections by buckles until they securely click into place.
- Attach the Auxiliary Handle: Slide the adjustable front handle onto the telescopic shaft. Tighten the knob to secure it at a comfortable position for your height and grip.
- Install the Guard: Securely attach the protective guard over the cutting head. Ensure it is firmly in place to prevent debris from being thrown towards the user.
- Charge and Install Battery: Fully charge both 20V 2.0Ah Lithium-Ion batteries using the provided fast charger. Once charged, slide a battery into the battery slot on the trimmer handle until it clicks into place.
Image: Step-by-step visual guide for assembling the trimmer's shaft.
Image: A user demonstrating the adjustment of the auxiliary handle for ergonomic use.
Image: A detailed view of the 21V Cub Tik battery, highlighting its power capacity.
Operating Instructions
Starting the Trimmer
The trimmer features a dual safety switch for safe operation. To start, press the safety lock button located on the handle, then simultaneously press the ON/OFF switch. Release the safety lock once the trimmer is running.
Image: Illustration of the dual safety switch mechanism on the trimmer's handle.
2-in-1 Trimming and Edging
This tool easily converts between trimming and edging modes. For trimming, hold the unit parallel to the ground. For edging, rotate the head 90 degrees and use the edger guide wheel to maintain a consistent line along sidewalks and driveways.
Image: Visual comparison demonstrating the trimmer mode and the wheeled edger mode.
Automatic Line Feed System
The innovative auto line feed system ensures continuous cutting performance without manual adjustments. When the line becomes too short, the system automatically extends it. If the line is too long, the trimmer will automatically trim the excess.
Image: An illustration detailing the automatic line feed mechanism and the 12-inch cutting diameter.
Adjustable Angle and Telescopic Shaft
The trimmer head can be adjusted to various angles (0°, 30°, 45°, 60°, 90°) to reach difficult areas. The telescopic shaft allows for height customization, improving comfort and control during operation.
Image: A person using the trimmer, showcasing its adjustable handle, rotating head, and telescopic shaft.
Maintenance
- Cleaning: After each use, remove the battery and clean the trimmer head and guard with a dry cloth to remove grass clippings and debris. Do not use water or solvents.
- Line Replacement: When the trimmer line spool is empty, replace it with a new 0.065" diameter line spool. Refer to the diagram on the spool cap for winding direction if manually winding.
- Battery Care: Store batteries in a cool, dry place. Do not expose to extreme temperatures. Charge batteries fully before long-term storage and recharge every 3-6 months to maintain battery health.
- Inspection: Regularly inspect the trimmer for any loose parts, damage to the guard, or wear on the cutting line. Replace damaged parts immediately.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Trimmer does not start | Battery not charged or improperly inserted; Safety switch not engaged; ON/OFF switch not pressed. | Ensure battery is fully charged and properly seated. Press safety lock then ON/OFF switch simultaneously. |
| Trimmer line not feeding | Line jammed or tangled; Spool empty; Debris in feed mechanism. | Remove battery, clear any debris, untangle line, or replace spool. |
| Reduced cutting performance | Dull or worn line; Low battery charge; Cutting too thick material. | Replace trimmer line. Recharge battery. Avoid cutting excessively thick weeds or branches. |
| Protector/Guard comes off | Improper installation; Missing screws. | Ensure guard is securely attached with all necessary fasteners. Contact support if parts are missing. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Cub Tik |
| Model Number | RF0007 |
| Power Source | Battery Powered |
| Battery Type | 20V 2.0Ah Lithium Ion (2 included) |
| Cutting Width | 12 Inches |
| Line Diameter | 0.065 Inches |
| No-Load Speed | 9000 RPM |
| Item Weight | 7.5 Pounds |
| Product Dimensions | 50.2"L x 13"W |
| Features | 2-in-1 Trimmer/Edger, Auto Line Feed, Adjustable Handle, 90° Rotating Head, Telescopic Shaft, Dual Safety Switch |
Warranty and Support
For warranty information or technical support, please contact Cub Tik customer service. Details can typically be found on the product packaging or the official Cub Tik website. Please have your model number (RF0007) and purchase date available when contacting support.
