Madaha Electric Power Recliner Chair User Manual

1. Introduction

Thank you for choosing the Madaha Electric Power Recliner Chair. This chair is designed to provide exceptional comfort and versatility, featuring power reclining, swivel, and rocking functions, along with convenient USB charging ports. Please read this manual thoroughly before assembly and use to ensure proper operation and safety.

Figure 1: Madaha Electric Power Recliner Chair (Beige)

2. Safety Information

For your safety and to prevent damage to the product, please adhere to the following guidelines:

• Always assemble the chair according to the instructions provided.
• Do not exceed the maximum weight capacity of 350 pounds.
• Keep the chair away from heat sources and open flames to prevent fire hazards.
• Always use the chair as intended and follow all safety guidelines to ensure safe and proper use.
• Keep children and pets away from the chair's moving parts during operation.

3. Setup

The Madaha Electric Power Recliner Chair is designed for tool-free assembly. Follow these steps to set up your chair:

1. Unpack all components from the packaging. Ensure all parts are present: base, backrest, and power adapter.


Figure 2: Unpacked chair components

2. Align the backrest with the base. Gently slide the backrest into the corresponding slots on the base until it clicks securely into place.


Figure 3: Attaching the backrest

3. Connect the power cable from the chair to the power adapter. Then, plug the power adapter into a standard electrical outlet.


Figure 4: Connecting the power supply

For a visual guide on assembly, please refer to the video below:

4. Operating Instructions

Your Madaha recliner offers multiple functions for enhanced comfort:

4.1 Power Reclining

Locate the control button on the side of the chair. Press and hold the button to smoothly recline the chair from 90 degrees to 165 degrees. Release the button at your desired angle. To return to the upright position, press and hold the button again.

Figure 5: Power Reclining Function

4.2 Swivel and Rocking

The chair features a 270-degree swivel function, allowing you to rotate freely. It also provides a gentle rocking motion for relaxation. These functions operate independently of the power recline.

Figure 6: Swivel and Rocking Capabilities

4.3 USB Charging Ports

The chair is equipped with built-in USB and USB-C charging ports located on the side control panel. Simply plug your mobile devices into these ports to charge them while you relax.

Figure 7: Built-in USB and USB-C Charging Ports

See the chair in action with these videos:

5. Maintenance

To keep your Madaha recliner in optimal condition, follow these maintenance tips:

• Cleaning: The Teddy Velvet fabric is stain-resistant and easy to care for. For spills, blot immediately with a clean, dry cloth. For general cleaning, use a soft brush or vacuum cleaner with an upholstery attachment to remove dust and debris. For tougher stains, a mild soap solution and damp cloth can be used, but always test on an inconspicuous area first.
• Mechanism Care: Periodically check all connections and moving parts to ensure they are secure. Avoid forcing the reclining mechanism if it encounters resistance.
• Placement: Avoid prolonged exposure to direct sunlight to prevent fading of the fabric. Keep the chair away from excessive moisture or humidity.

Figure 8: Premium Chenille Fabric Details

6. Troubleshooting

If you encounter any issues with your recliner, please refer to the following common solutions:

• Chair not reclining: Ensure the power cord is securely plugged into both the chair and the wall outlet. Check if the outlet is functional by plugging in another device.
• Unusual noises during operation: Verify that all assembly connections are tight. Ensure no objects are obstructing the reclining mechanism or base.
• USB ports not charging: Confirm the chair is powered on and plugged in. Try a different USB cable or device to rule out cable/device issues.
• Chair feels unstable: Recheck all assembly points to ensure the backrest is fully engaged with the base. Ensure the chair is placed on a flat, stable surface.

If the problem persists after attempting these solutions, please contact customer support.

7. Specifications

Figure 9: Detailed Product Dimensions

8. Warranty and Support

For information regarding warranty coverage or to obtain technical support, please contact Madaha customer service through the retailer where the product was purchased or visit the official Madaha website. Please have your model number (Y8L064) and purchase details ready when contacting support.