Introduction
This manual provides detailed instructions for the proper use and maintenance of your HUYNL Hidden Camera Detector & Bug Detector. This device is designed to enhance your privacy and security by detecting various hidden surveillance devices.
Key Features
- Multi-functional Detection: Detects hidden cameras, GPS trackers, listening devices, and other bugs.
- Wide Frequency Range: Operates within 50MHz-10GHz for comprehensive scanning.
- Anti-theft Alarm: Features a motion-activated alarm for personal and property security.
- Built-in Flashlight: Provides emergency illumination.
- Real-time Display: Clear LED screen shows detection status and settings.
- Adjustable Sensitivity: Allows for precise detection in various environments.
- Portable Design: Compact and lightweight for easy travel.
- Long Battery Life: Up to 45 hours of operation on a single 1-hour charge.
What's Included
The product package contains the following items:
- 1 x HUYNL Hidden Camera Detector (Model K88)
- 1 x Type-C Charging Cable
- 1 x Instruction Manual
- 1 x Exquisite Packaging Box
Setup
- Charging the Device:
Connect the provided Type-C charging cable to the device's charging port and to a compatible USB power source. The device requires approximately 1 hour for a full charge, providing up to 45 hours of continuous use.
Image: The HUYNL Hidden Camera Detector shown alongside its Type-C charging cable, illustrating the charging setup.
- Powering On/Off:
To power on the device, long-press the bottom button. The LED display screen will illuminate. To power off, long-press the same button again.
Video: A demonstration of powering on and off the HUYNL Hidden Camera Detector, showing the button press and screen response.
Operating Instructions
- Flashlight Function:
To activate the built-in flashlight, short-press the bottom button while the device is on. Short-press again to turn it off.
Image: The detector illuminating a dark path with its built-in flashlight, highlighting its utility in low-light conditions.
- Signal Seeking Mode (RF Detection):
Use this mode to detect wireless signals from hidden cameras, listening devices, and GPS trackers. The device will emit a beeping sound, with intensity increasing as you approach a signal source. Adjust sensitivity using the top button to narrow down the search area.
Video: A demonstration of the signal seeking mode, showing the device detecting a Wi-Fi router and a doorbell camera, with increasing beeping intensity.
Image: The detector displaying "Seek signal" on its screen, indicating its readiness to detect wireless transmissions.
- Lens Detection Mode (Infrared/Visual):
Activate this mode to visually scan for hidden camera lenses. Look through the red viewing window on the device. Hidden lenses will appear as bright red dots when illuminated by the device's infrared LEDs.
Image: The detector's lens detection feature in use, showing red LEDs illuminating a room to reveal hidden camera lenses.
- Magnetic Anomaly Detection (MAD):
This mode is specifically designed to locate magnetic GPS trackers often attached to vehicles. The device will alert you to the presence of strong magnetic fields.
Image: The detector being used to scan under a car, demonstrating its magnetic anomaly detection capability for GPS trackers.
- Anti-theft Alarm:
To activate the anti-theft alarm, navigate to the alarm setting on the display and turn it ON. Attach the device to your luggage, door, or any item you wish to protect. If the item is moved or disturbed, the alarm will sound loudly to alert you.
Image: The detector hanging on a hotel door, illustrating its anti-theft alarm feature to deter unauthorized entry.
Maintenance
- Keep the device clean by wiping it with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures, moisture, or direct sunlight.
- Store the device in its original packaging or a protective case when not in use.
- Ensure the device is fully charged before extended periods of storage to maintain battery health.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on. | Low battery. | Charge the device fully (approx. 1 hour). |
| No signal detected. | Sensitivity too low; no active signals nearby. | Increase sensitivity setting; ensure target devices are active. |
| False alarms in signal mode. | Sensitivity too high; interference from common electronics. | Decrease sensitivity setting; move away from known electronic devices. |
| Lens detection not working. | Not looking directly through the red window; camera lens too small/hidden. | Ensure direct line of sight through the red window; scan slowly and thoroughly. |
Specifications
- Model: K88
- Brand: HUYNL
- Detection Frequency Range: 50MHz - 10GHz
- Detection Distance: Up to 15 meters
- Power Source: Battery Powered (1 Lithium Ion battery, included)
- Charging Interface: Type-C
- Charging Time: Approximately 1 hour
- Operating Time: Up to 45 hours
- Material: Acrylonitrile Butadiene Styrene (ABS)
- Color: Black
- Dimensions (L x W x H): 1 x 1 x 1 inches
- Item Weight: 6.7 ounces
- Special Features: Portable, Adjustable Sensitivity, Precise Detection, LED Display, Anti-theft Alarm, Flashlight.
Warranty & Support
For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official HUYNL website. Keep your purchase receipt for warranty claims.
Official HUYNL Store: Visit Store