MACTANO Enchant Glass Teapot with Strainer (380ML / 12.85 OZ) - Instruction Manual

Product Overview

The MACTANO Enchant Glass Teapot features an innovative tea-water separation system designed to prevent over-steeping. Its double-layer borosilicate glass construction is suitable for both hot and cold beverages. The transparent design allows for visual monitoring of the brewing process, enhancing the overall tea-brewing experience.

Safety Instructions

• Handle with care: The teapot is made of glass and can break if dropped or subjected to sudden temperature changes.
• Keep out of reach of children.
• Avoid using abrasive cleaners or scourers that may scratch the glass.
• This product is not dishwasher safe. Hand wash only.

Components

Your MACTANO Enchant Glass Teapot consists of the following parts:

• Main Glass Teapot Body with Handle
• Inner Tea Infuser/Strainer Chamber
• Magnetic Lid

Image: The MACTANO Enchant Teapot in two states: 'Open state' showing the lid twisted to allow liquid flow, and 'Closed state' with the lid twisted to seal the infuser chamber.

Setup

1. Unpack all components from the packaging.
2. Wash all parts of the teapot thoroughly with warm soapy water before first use. Rinse completely and dry.
3. Ensure the inner tea infuser chamber is securely placed inside the main glass body.
4. Place the magnetic lid on top of the infuser chamber.

Operating Instructions

1. Add Tea Leaves: Open the magnetic lid and place your desired amount of loose tea leaves into the inner infuser chamber.


Image: A hand pouring loose tea leaves into the top infuser section of the glass teapot.

2. Add Hot Water: Carefully pour hot water over the tea leaves in the infuser chamber. Do not overfill.
3. Steep Tea: Close the magnetic lid. Allow the tea to steep for the recommended time according to your tea type. The transparent design allows you to observe the brewing process.
4. Release Brewed Tea: Once steeping is complete, twist the magnetic lid to align the opening, allowing the brewed tea to flow from the infuser chamber into the main teapot body.


Image: A close-up of the magnetic lid, highlighting the round button for one-touch exhaust, which facilitates the tea-water separation.

5. Serve: Once the tea has fully drained into the main body, you can pour and serve your freshly brewed tea.


Image: A hand pouring red-colored brewed tea from the MACTANO Enchant Teapot into a small glass cup, demonstrating the pouring function.

Product Demonstration Video

Video: An official MACTANO demonstration showing the rotation magic teapot in use, including adding tea, hot water, and the tea-water separation process.

Cleaning and Maintenance

• Hand Wash Only: This teapot is not dishwasher safe. Wash all components by hand with warm water and mild soap.
• Rinse Thoroughly: Ensure all soap residue is rinsed off.
• Dry Completely: Allow all parts to dry completely before reassembling or storing to prevent water spots or mildew.
• Avoid Abrasives: Do not use abrasive sponges or harsh chemicals, as these can scratch the glass or damage the magnetic components.

Troubleshooting

• Tea not draining: Ensure the magnetic lid is twisted to the "open" position, allowing the ball valve to drop and release the tea. Check for any tea leaf blockages in the valve area.
• Lid not sealing: Ensure the magnetic lid is properly aligned and twisted to the "closed" position. Check for any debris preventing a tight seal.
• Glass appears cloudy: This may be due to mineral deposits from water. Clean with a solution of white vinegar and water, then rinse thoroughly.

Specifications

Image: The MACTANO Enchant Teapot displayed next to a smartphone for scale, with dimensions labeled as 2.8 inches in diameter and 8.27 inches in height.

Warranty and Support

For warranty information or product support, please contact MACTANO customer service through the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.