1. Introduction
Thank you for choosing the VASAGLE LED Bed Frame and Nightstands. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new furniture. Please read this manual thoroughly before beginning assembly and retain it for future reference.
2. Safety Information
- Keep all packaging materials away from children and pets to prevent choking hazards.
- Assemble the product on a soft, clean surface to prevent scratches.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not stand or jump on the bed frame.
- Do not exceed the maximum weight capacity of the bed frame (refer to product listing for specific details).
- Only use the provided power adapter for the LED lights and charging station.
- Keep liquids away from the charging station to prevent electrical hazards.
- If any parts are missing or damaged, do not proceed with assembly. Contact customer support immediately.
3. Package Contents
Before assembly, verify that all components listed below are present. If any parts are missing or damaged, please contact customer support.
3.1 Bed Frame (Model: URMB842B01)
Included Parts: Headboard panels, side rails, footboard, center support beam, slats, LED strip, power adapter, remote control, hardware pack (screws, bolts, washers, Allen wrench).
Image 1: All components of the VASAGLE LED Bed Frame (URMB842B01). This image displays the headboard sections, side rails, footboard, various wooden slats, the central support beam, and a small bag containing all necessary screws, bolts, and tools for assembly.
3.2 Nightstands (Model: ULCT667G01, Set of 2)
Included Parts (per nightstand): Top panel, side panels, back panel, bottom panel, fabric drawer basket, hardware pack (screws, dowels, cam locks).
Image 2: All components for one VASAGLE Nightstand (ULCT667G01). This image shows the wooden top, side, and bottom panels, the back panel, and a foldable fabric basket, along with a small bag of assembly hardware.
3.3 Tools Required (Not Included)
- Phillips Head Screwdriver
- Hammer (optional, for dowels)
4. Assembly Instructions
It is recommended to have two people for bed frame assembly. Follow the steps in order.
4.1 Bed Frame Assembly (Model: URMB842B01)
- Attach Headboard Panels: Connect the upper and lower headboard panels using the provided bolts and cam locks. Ensure the charging station module is correctly oriented.
Image 3: Step-by-step diagram illustrating the connection of the upper and lower headboard sections, highlighting the placement of bolts and cam locks.
- Install Charging Station: Secure the charging station module into the designated slot on the headboard using the small screws.
Image 4: Detailed view of the charging station module being inserted and secured into the headboard's pre-cut opening with small screws.
- Attach Side Rails to Headboard: Connect the side rails to the assembled headboard using the larger bolts. Do not fully tighten yet.
- Attach Footboard: Connect the footboard to the other end of the side rails. Fully tighten all bolts connecting the headboard, side rails, and footboard.
- Install Center Support Beam: Place the center support beam along the length of the bed frame and secure it to the headboard and footboard brackets. Attach any support legs to the beam.
- Place Slats: Lay the wooden slats across the side rails, ensuring even spacing. Secure them using the provided plastic caps or screws, if applicable.
- Attach LED Strip: Peel the adhesive backing from the LED strip and carefully attach it to the designated area on the back of the headboard or along the side rails, as per the specific model design. Connect the LED strip to the power adapter.
4.2 Nightstand Assembly (Model: ULCT667G01)
Each nightstand can be assembled in approximately 5-10 minutes.
- Assemble Frame: Connect the side panels to the top and bottom panels using the provided dowels and cam locks. Ensure the open shelf compartment is correctly formed.
- Attach Back Panel: Slide or nail the back panel into the grooves on the rear of the nightstand frame.
- Insert Fabric Basket: Unfold the fabric basket and place it into the designated compartment.
- Repeat for Second Nightstand: Follow the same steps to assemble the second nightstand.
5. Operating Instructions
5.1 LED Lighting System
- Power Connection: Plug the LED power adapter into a standard wall outlet.
- Remote Control: Use the provided remote control to operate the LED lights.
Image 5: The remote control for the LED lighting system, showing buttons for power on/off, various color presets, brightness adjustment, and dynamic lighting modes.
- Functions:
- Power Button: Turns the LED lights on or off.
- Color Buttons: Selects static colors (e.g., red, green, blue, white).
- Brightness Buttons: Adjusts the intensity of the light.
- Mode Buttons: Cycles through various dynamic lighting effects (e.g., fade, jump, strobe).
5.2 Charging Station
- Power Connection: The charging station is powered by the same adapter as the LED lights. Ensure the adapter is plugged into a wall outlet.
- Ports: The headboard features 2 standard AC outlets, 1 USB-A port, and 1 USB-C port.
- Usage: Plug your electronic devices directly into the appropriate ports for charging.
- Safety Note: Do not overload the charging station. Avoid plugging in high-power appliances.
6. Maintenance and Care
- Cleaning: Wipe the bed frame and nightstands with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Spills: Immediately wipe up any spills to prevent damage to the wood finish or electrical components.
- Fasteners: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as needed to maintain stability.
- Fabric Basket: The fabric basket can be spot cleaned with a mild detergent and water. Allow to air dry completely.
- Electrical Components: Ensure the charging station and LED power adapter are kept dry and free from dust. Unplug from the wall outlet before cleaning.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights do not turn on. | Power adapter unplugged; remote control battery dead; LED strip disconnected. | Ensure power adapter is securely plugged into outlet and LED strip. Replace remote control battery. |
| Charging station not working. | Power adapter unplugged; device cable faulty; charging station overloaded. | Verify power adapter connection. Try a different device cable. Unplug other devices from the station. |
| Bed frame feels wobbly. | Loose bolts or screws. | Check and re-tighten all assembly bolts and screws, especially those connecting the side rails to the headboard and footboard. |
| Nightstand feels unstable. | Loose cam locks or dowels. | Ensure all cam locks are fully tightened and dowels are properly seated. |
8. Specifications
- Bed Frame Model: URMB842B01
- Nightstand Model: ULCT667G01
- Size: Full
- Material: Engineered Wood, Steel, Fabric
- Headboard Features: Storage compartments (1 open shelf, 1 open, 1 hidden), LED lighting, Charging Station
- Charging Station Output: 2 AC Outlets, 1 USB-A Port, 1 USB-C Port
- Nightstand Features: 1 open shelf, 1 fabric drawer basket
- Maximum Weight Capacity (Bed Frame): Refer to product listing for specific details.
- Power Input: 100-240V~, 50/60Hz (for LED/Charging Station adapter)
9. Warranty and Customer Support
VASAGLE products are designed for quality and durability. For specific warranty information regarding your purchase, please refer to the warranty card included in your package or visit the official VASAGLE website.
If you encounter any issues during assembly or operation, or if you have questions about your product, please contact our customer support team:
- Website: www.vasagle.com/support
- Email: support@vasagle.com
- Phone: [Customer Service Phone Number if available]
Please have your model numbers (URMB842B01, ULCT667G01) and purchase date ready when contacting support.
