Hazard 4 Hard Point Hardware Kit Instruction Manual

1. Introduction

The Hazard 4 Hard Point Hardware Kit is an innovative accessory system designed to enhance the functionality of Hazard 4 bags and gear. This kit allows for the secure attachment of various items and expansion modules to your equipment, utilizing existing grommets and MOLLE webbing. The unique design incorporates rubbery polymer backers to protect your gear and ensure a secure fit.

Key Features:

• Screws into hard shells and soft double grommets on Hazard 4 bags, also compatible with MOLLE webbing.
• Provides versatile functionality for adding loops, valves, wire passages, and lights.
• Enables mounting of extra pouches and utility panels.
• Ideal for creating bungee/paracord retention zig-zags, clipping off ice axes, or attaching carabiners.
• Includes rubbery polymer backers with plugs to cover screws/nuts, preventing scratches inside and outside the bag.

Figure 1: Components of the Hard Point Hardware Kit (Black)

This image displays the complete set of components included in the Hazard 4 Hard Point Hardware Kit. It features two black screws, two black hexagonal nuts, and four black hexagonal rubber plugs. These parts work together to provide a secure and protected attachment point on compatible gear.

2. Setup and Installation

The Hard Point Hardware Kit is designed for straightforward installation using a single screwdriver. Follow these steps to properly attach the hardware to your Hazard 4 gear:

1. Identify Attachment Points: Locate the double grommets on your Hazard 4 hard shell or soft bag, or the appropriate sections of MOLLE webbing where you wish to install the hardware.
2. Position the Backer: From the inside of the bag or behind the MOLLE webbing, place one of the rubbery polymer backers (hexagonal plug) over the desired grommet or webbing slot. Ensure the hole in the backer aligns with the attachment point.
3. Insert the Screw: From the outside of the bag or front of the MOLLE webbing, insert a screw through the grommet/webbing and through the aligned hole in the rubbery polymer backer.
4. Attach the Nut: On the inside, thread a nut onto the screw. Hand-tighten it initially.
5. Secure with Screwdriver: Using a screwdriver, tighten the screw until the hardware is firmly secured. Do not overtighten, as this may damage the material. The rubbery backer should compress slightly, providing a snug fit.
6. Cover the Nut: Once tightened, press the remaining rubbery polymer plug (nut cover) over the exposed nut on the inside of the bag. This covers the nut, preventing scratches and providing a clean finish.

Figure 2: Hard Point Hardware installed on a sling bag

This image demonstrates the Hazard 4 Hard Point Hardware Kit securely installed on a tan sling bag. The black hardware components are visible, integrated into the bag's design, showcasing how they can be used to attach additional items or provide new anchor points.

Figure 3: Hard Point Hardware installed on a backpack

This image illustrates the Hazard 4 Hard Point Hardware Kit in use on a tan backpack. The hardware is integrated into the backpack's exterior, providing robust attachment points for various accessories, highlighting its versatility for different types of gear.

3. Operating and Functionality

Once installed, the Hard Point Hardware Kit provides a robust and versatile attachment point for a wide range of accessories and applications:

• Accessory Attachment: Use the exposed screw head or the integrated loop (depending on the specific Hard Point accessory) to attach carabiners, keychains, small pouches, or other gear.
• Cable/Hose Routing: The design can facilitate the routing of hydration hoses, communication cables, or other lines, keeping them organized and secure.
• Bungee/Paracord Systems: Create custom bungee or paracord retention systems by weaving cord through multiple Hard Point installations, ideal for securing jackets, helmets, or other bulky items.
• Light/Tool Mounting: Certain Hard Point accessories are designed to mount small lights, tools, or other specialized equipment directly to your bag.

Figure 4: Example of retention straps with Hard Point compatibility

This image shows orange straps that can be integrated with Hard Point hardware to create retention systems. The design suggests how the hardware can be used to secure items or add modular functionality to bags and gear.

Figure 5: Example of a light accessory compatible with Hard Point

This image features a compact red light accessory, illustrating how the Hard Point system can be used to mount various electronic devices or tools directly onto your gear for quick access and utility.

4. Maintenance

The Hazard 4 Hard Point Hardware Kit is designed for durability and requires minimal maintenance. However, regular inspection can ensure its longevity and continued performance:

• Periodic Inspection: Periodically check the tightness of the screws. If they feel loose, gently retighten them with a screwdriver.
• Cleaning: If the hardware becomes dirty, wipe it clean with a damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the finish or the rubber components.
• Rubber Plugs: Ensure the rubber plugs covering the nuts remain securely in place. These plugs are crucial for protecting your gear from scratches and preventing the nuts from snagging on internal contents.

5. Troubleshooting

Should you encounter any issues with your Hard Point Hardware Kit, consider the following troubleshooting tips:

• Hardware Feels Loose: If the installed hardware feels loose, ensure the screw and nut are properly aligned and fully tightened. The rubber backer should be compressed slightly. Avoid overtightening, which can strip threads or damage the fabric.
• Difficulty Installing: Ensure you are using the correct size screwdriver. Verify that the grommets or MOLLE webbing are clear of obstructions and that the rubber backer is correctly aligned before inserting the screw.
• Missing Components: Refer to the "What's Included" section in the introduction. If any components are missing upon receipt, contact Hazard 4 customer support.

6. Specifications

7. Warranty and Support

Specific warranty information for the Hazard 4 Hard Point Hardware Kit is not provided in this manual. For details regarding warranty coverage, returns, or technical support, please visit the official Hazard 4 website or contact their customer service directly.

Hazard 4 Official Website: www.hazard4.com

For additional product information or to explore other Hazard 4 accessories, you can also visit the Hazard 4 store on Amazon: Hazard 4 Amazon Store