Introduction
This user manual provides comprehensive instructions for the ABBIDOT Shock Collar (Model AB-T70), a dog training system designed to assist owners in training their dogs effectively and humanely. The system features a remote control and a waterproof collar, offering multiple training modes including tone, vibration, and static stimulation, along with an E-Clicker for positive reinforcement. Please read this manual thoroughly before use to ensure proper operation and the safety of your pet.

Image: The ABBIDOT Shock Collar system, showing the remote control and the collar receiver.
Safety Information
Important Safety Guidelines:
- This training collar is intended for dogs over 6 months of age.
- Do not leave the collar on your dog for more than 12 hours per day. Prolonged wear can lead to skin irritation.
- Regularly check your dog's neck for any signs of irritation or sores. If irritation occurs, discontinue use until the skin heals.
- The collar features a built-in safety lock and an auto-shutoff mechanism. The training function automatically stops after 10 seconds of continuous activation and resets after 5 seconds to prevent overuse.
- Always start with the lowest stimulation level and gradually increase it to find the appropriate level for your dog.
- Never use the static stimulation mode as a form of punishment. It should only be used for behavior correction during training.
- Ensure the collar fits snugly but not too tightly. You should be able to fit two fingers comfortably between the collar and your dog's neck.
Package Contents
Upon opening your ABBIDOT Shock Collar package, please verify that all components are present:
- T70 Remote Control
- T70 Collar with Strap
- User Manual (this document)
- Dog Training Booklet
- Type-C Charging Cable
- Lanyard
- Test Light Tool
- Silicone Caps (4x)
- Contact Points (4x)
- Metal Extension Contact

Image: A visual representation of all items included in the ABBIDOT Shock Collar package.
Product Overview
Remote Control (T70)
The remote control features a 2.0-inch large display for clear visibility of settings and modes. It is designed for user-friendly operation with dedicated buttons for tone, vibration, and a customizable 'Super' mode. A safety lock prevents accidental activation.
Collar Receiver
The collar receiver is compact and lightweight, designed to be comfortable for dogs ranging from 10 to 130 lbs. It is IP67-rated waterproof, making it suitable for various environments. The collar also includes a built-in 3-mode night light for visibility in low-light conditions.

Image: Close-up of the remote control's user-friendly display and the collar receiver, highlighting safety and functionality.
Setup
1. Charging the Devices
Before first use, fully charge both the remote control and the collar receiver. Use the provided Type-C charging cable. The remote has a standby time of up to 55 days, and the collar up to 45 days on a full charge.
- Connect the Type-C cable to the charging port on both devices.
- A full charge typically takes a few hours. The indicator light will change when charging is complete.

Image: Illustration of the long battery life and extensive 4500 feet control range of the system.
2. Pairing the Remote and Collar
The remote and collar are typically pre-paired from the factory. If re-pairing is necessary:
- Ensure both devices are turned off.
- Turn on the remote control.
- Press and hold the power button on the collar receiver until the indicator light flashes rapidly.
- Within 10 seconds, press any training mode button (Tone, Vibration, or Super) on the remote. The collar's indicator light will become solid, indicating successful pairing.
3. Fitting the Collar
Proper fit is essential for effective and safe operation. The adjustable strap fits dogs from 10 to 130 lbs.
- Place the collar around your dog's neck so that the contact points are positioned underneath, making direct contact with the skin.
- Adjust the strap to be snug, but not tight. You should be able to fit two fingers comfortably between the collar and your dog's neck.
- Trim any excess strap length if necessary.

Image: Diagram showing the adjustable collar strap and its suitability for small, medium, and large dog breeds.
Operating Instructions
1. Turning On/Off
- To turn on the remote: Press and hold the power button until the display illuminates.
- To turn on the collar: Press and hold the power button on the collar until the indicator light flashes.
- To turn off both devices: Press and hold their respective power buttons until the lights/display turn off.
2. Training Modes
The ABBIDOT Shock Collar offers 4 primary training modes, including 9-tone, 36-vibration, and 2 custom modes. The system supports up to 6 dogs.
- Tone Mode: Emits an audible beep. Useful for gaining your dog's attention or as a warning signal.
- Vibration Mode: Delivers a gentle vibration. Offers 36 levels of intensity. Effective for non-aversive correction or attention.
- Custom Modes (Super Mode): Two customizable modes allow you to combine tone and vibration, or use static stimulation. The static stimulation offers 118 levels of intensity. Long press the 'Super' button to switch between combo (tone+vibration) and static sessions.

Image: Visual guide to the customizable training modes, including tone, vibration, and static stimulation with adjustable levels.
3. E-Clicker Function
The built-in E-Clicker facilitates positive reinforcement training. Pair the clicker sound with a reward (e.g., a treat) immediately after your dog performs a desired action.
- Press the E-Clicker button on the remote when your dog performs the desired behavior.
- Immediately follow with a verbal praise and a treat.
- This method helps your dog associate the click sound with positive outcomes, reinforcing good behaviors.

Image: Depiction of using the E-clicker for positive reinforcement training, showing a dog responding to commands.
4. Night Light Function
The collar features a 3-mode night light to help locate your dog in low-light conditions:
- Flashlight: Continuous light.
- Slow Flash: Slow blinking light.
- Explosive Flash: Rapid blinking light.
Activate and cycle through the light modes using the dedicated light button on the remote.

Image: Illustration of the anti-lost night light feature on the collar, showing different light modes for visibility in the dark.
Maintenance
Cleaning
- Regularly clean the collar and remote with a damp cloth.
- Ensure the contact points on the collar are clean to maintain effective stimulation.
- Do not use harsh chemicals or abrasive materials for cleaning.
Battery Care
- Charge the devices fully before long periods of inactivity.
- Store in a cool, dry place when not in use.
Waterproofing
The collar is IP67-rated waterproof, meaning it can withstand immersion in water up to 1 meter for 30 minutes. The remote is IP65-rated water-resistant, protecting against low-pressure water jets from any direction. While durable, avoid prolonged submersion of the remote.

Image: Visual representation of the collar's IPX7 waterproof rating and the remote's IPX5 water resistance, suitable for various training environments.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Collar not responding to remote. | Low battery on either device; devices not paired; out of range. | Charge both devices fully. Re-pair the remote and collar. Ensure you are within the 4500ft operating range. |
| Static stimulation not working. | Collar not making proper skin contact; level set too low; safety auto-shutoff activated. | Adjust collar fit to ensure contact points touch skin. Increase stimulation level gradually. Wait 5 seconds for auto-shutoff to reset. Use the test light tool to verify function. |
| Dog shows signs of discomfort or irritation. | Collar too tight; worn for too long; allergic reaction. | Loosen collar slightly. Do not leave on for more than 12 hours. Discontinue use and consult a veterinarian if irritation persists. |
| Remote display is dim or unresponsive. | Low battery; extreme temperatures. | Charge the remote. Operate within recommended temperature ranges. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | AB-T70 |
| Brand | ABBIDOT |
| Training Modes | Tone (9 levels), Vibration (36 levels), Custom (Tone+Vibration, Static 118 levels) |
| Control Range | Up to 4500 feet (approx. 1370 meters) |
| Collar Waterproof Rating | IP67 |
| Remote Water Resistance Rating | IP65 |
| Remote Battery Life | Up to 55 days (standby) |
| Collar Battery Life | Up to 45 days (standby) |
| Dog Weight Range | 10 to 130 lbs |
| Display | 2.0-inch Large Display |
| Manufacturer | Shenzhen Zheer Life Technology Co., Ltd. |
| Country of Origin | China |
Warranty and Support
ABBIDOT stands behind its products. This product comes with a 1-year warranty.
- If you are not satisfied, or if the product is not working or broken, please contact customer support for a refund, replacement, or assistance.
- For fast customer support, please reach out via email: Support@abbidot.com

Image: Information regarding ABBIDOT's customer service, warranty, and contact details.