Huuger Black Nightstand Set of 2 with Charger Station

Important Safety Information

Please read and understand all instructions before assembly and use. Failure to follow these instructions may result in injury or product damage.

• Always follow the assembly instructions carefully to avoid injury.
• Do not overload the nightstand. The maximum recommended weight capacity is 300 pounds (136 kg). Exceeding this limit may cause the nightstand to tip over, posing a safety hazard.
• Keep small parts and packaging materials away from children.
• Ensure all connections are secure before use. Periodically check and tighten fasteners as needed.
• Place the nightstand on a flat, stable surface.

Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Nightstand components (labeled A, B, C, etc.)
• Hardware kit (screws, dowels, cam locks, etc.)
• Charging Station unit
• Assembly Guide
• Installation Tool (screwdriver)

Image: Overview of the assembled Huuger Black Nightstands.

Assembly Instructions

Assembly typically takes 1-2 hours per nightstand. It is recommended to have a clear workspace and follow the steps sequentially.

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface. Match each part to the corresponding label in the assembly guide.
2. Assemble the Frame: Connect the side panels to the top and bottom panels using the provided hardware (e.g., cam locks and dowels). Ensure all connections are snug.
3. Install Drawer Glides: Attach the drawer glides to the inner side panels of the nightstand frame according to the guide. Ensure they are level and aligned.
4. Assemble Drawers: Construct the drawer boxes by connecting the drawer sides, front, and back panels. Slide the bottom panel into the grooves. Attach the remaining drawer glide components to the assembled drawers.
5. Insert Drawers: Carefully slide the assembled drawers into the nightstand frame, ensuring they move smoothly on the glides.
6. Attach Handles: Secure the zinc alloy handles to the drawer fronts using the provided screws.
7. Install Charging Station: Place the charging station unit into the designated cutout on the top panel. Secure it with the provided fasteners.
8. Attach Felt Pads: Apply the bottom felt pads to the base of the nightstand legs to protect your floor.

Image: Detail of bottom felt pad and zinc alloy handle.

Operating Instructions

Charging Station Usage

The integrated charging station provides convenient power access for your electronic devices.

• Power Connection: Plug the nightstand's power cord into a standard 120V AC wall outlet.
• AC Outlets: The charging station includes two 125V/12A AC outlets for powering lamps, laptops, or other appliances.
• USB Port: One 5V/2A USB-A port is available for charging smartphones, tablets, and other USB-powered devices.
• Type-C Port: One 5V/2A Type-C port is available for charging compatible devices.

Image: Detail of the charging station with AC, USB, and Type-C ports.

Drawer Usage

The nightstand features two spacious drawers for organized storage.

• Opening/Closing: Gently pull the zinc alloy handles to open the drawers. Push them back in until they are fully closed.
• Storage Capacity: The drawers are designed to hold various bedside essentials such as books, electronics, and personal items. Avoid placing excessively heavy items in the drawers to ensure smooth operation and longevity of the glides.

Image: Open drawers showcasing storage capacity.

Maintenance and Care

Proper care will help maintain the appearance and longevity of your Huuger nightstand.

• Cleaning: Wipe the surface with a damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the painted finish.
• Spills: Promptly wipe up any spills to prevent staining, especially on the engineered wood surface.
• Protection: While the painted surface offers some resistance, using coasters for drinks and protective mats for heavy or sharp objects is recommended to prevent scratches and marks.
• Fasteners: Periodically check all screws and fasteners to ensure they remain tight. Retighten if necessary.

Image: Features of the painted surface, including ease of cleaning.

Troubleshooting

If you encounter issues with your nightstand, refer to the following common solutions:

• Wobbly Nightstand: Ensure all assembly screws and cam locks are fully tightened. Verify the nightstand is on a level surface. Adjust the felt pads if necessary.
• Drawers Not Sliding Smoothly: Check that the drawer glides are correctly installed and aligned. Ensure no objects are obstructing the drawer's path. Lubricate glides with a silicone-based spray if needed.
• Charging Station Not Working: Verify the nightstand's power cord is securely plugged into a functional wall outlet. Check if the outlet itself is receiving power (e.g., by plugging in another device). Ensure devices are properly connected to the USB/Type-C ports or AC outlets.
• Missing Parts: If any parts were missing upon delivery, refer to the 'Package Contents' section and contact customer support for replacements.

Specifications

Detailed product specifications for the Huuger Black Nightstand.

Image: Product dimensions diagram.

Warranty and Support

This Huuger nightstand comes with a Limited Warranty. Please refer to the warranty documentation included in your package for specific terms and conditions.

For technical assistance, missing parts, or warranty claims, please contact Huuger customer support through the retailer where the product was purchased or visit the official Huuger website.

Online Resources: For additional support and frequently asked questions, you may visit the Huuger Store on Amazon.