Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your DVKNM Magnetic Solar Wireless RV Backup Camera System. Please read this manual thoroughly before using the product to ensure proper function and safety.
Image: The DVKNM Magnetic Solar Wireless RV Backup Camera System, showing the 7-inch touchscreen monitor and two magnetic solar-powered wireless cameras.
What's in the Box
Please verify that all components are present in the package:
- 7 inch Touchscreen Full HD Monitor
- Magnetic Wireless Backup Camera (x2)
- 32GB SD Card
- Type-C Charging Cable
- Installation Tools and Accessories
Setup
1. Camera Installation
The magnetic wireless backup cameras are designed for quick and easy installation without drilling or wiring. Simply attach the camera to any metal surface on your vehicle, such as the rear of an RV or trailer. The strong magnetic base ensures secure attachment during travel.
Image: A hand demonstrating the magnetic base of the camera attaching securely to a metal surface on a vehicle, highlighting the ease of installation.
2. Monitor Power Connection
To power the 7-inch touchscreen monitor, simply plug it into your vehicle's cigarette lighter socket. No complex wiring is required for the monitor.
Operating Instructions
Auto On/Off Camera Function
The rear view camera features an intelligent sleep mode to conserve power. When the monitor is turned off, the camera automatically enters sleep mode. When the monitor is turned on, the camera wakes up automatically. No manual switch is needed for this function.
Image: The camera in a dark setting, illustrating its automatic sleep mode when the monitor is off, indicated by sleep (Zz) and moon/infinity symbols.
Charging the Camera
The camera is equipped with a 12000mAh battery and supports two charging methods:
- Type-C Charging: Use the provided Type-C charging cable to charge the camera via a power source.
- Solar Charging: The integrated solar panel on the camera allows for continuous charging during daylight hours, extending battery life.
Image: The camera being charged via its Type-C port and simultaneously by its solar panel, demonstrating the dual charging capabilities.
Display and Night Vision
The system features a 1080P HD color CMOS sensor in the camera and a 7-inch Touchscreen Full HD IPS monitor for clear images. For low light or complete darkness, the camera is equipped with 6 infrared night vision LED lights to ensure visibility and safety.
Image: A split image showing the camera's view during the day (color) and at night (monochrome with enhanced visibility), highlighting its FHD Super Night Vision capabilities.
Digital Signal and Recording
The upgraded antenna ensures a strong and stable digital signal up to 328ft (without obstacles), preventing image freezing or signal loss. The monitor includes a 32GB SD card for loop recording and local playback, functioning as a dash cam for easy video access.
Maintenance
To ensure the longevity and optimal performance of your DVKNM backup camera system, follow these maintenance guidelines:
- Cleaning: Regularly wipe the camera lens and monitor screen with a soft, dry cloth to remove dust and smudges. For stubborn dirt, use a slightly damp cloth and then dry thoroughly.
- Waterproof Rating: The camera has an IP69 waterproof rating, meaning it is protected against high-pressure, high-temperature spray downs. However, avoid prolonged submersion.
Image: The camera shown with water droplets, illustrating its IP69 waterproof rating and ability to withstand rain and snow.
- Battery Care: For optimal battery life, avoid completely draining the camera's battery frequently. Utilize the solar charging feature whenever possible.
- Storage: When not in use for extended periods, store the system in a cool, dry place.
Troubleshooting
If you encounter issues with your DVKNM backup camera system, please refer to the following common solutions:
- No Image on Monitor:
- Ensure the monitor is properly plugged into the cigarette lighter and receiving power.
- Check if the camera is powered on (if not in auto-on mode) and within range of the monitor.
- Verify that the camera's battery is charged.
- Signal Interruption/Poor Image Quality:
- Ensure there are no significant physical obstructions between the camera and the monitor.
- Move the camera or monitor slightly to find a better signal path.
- Check for strong electromagnetic interference from other devices.
- Camera Not Charging:
- For solar charging, ensure the solar panel is clean and exposed to direct sunlight.
- For Type-C charging, verify the cable and power adapter are functioning correctly.
If problems persist, please contact DVKNM customer support for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | DVKNM |
| Model Name | M7-2 |
| Connectivity Technology | USB Type-C, Wireless |
| Video Capture Resolution | 1080p |
| Vehicle Service Type | RV, Truck |
| Mounting Type | Magnetic Mount |
| Color | Black |
| Included Components | 7 inch Touchscreen Full HD Monitor, Magnetic Wireless Backup Camera, 32GB SD Card, Type-C Charging Cable, Installation Tools and Accessories |
| Batteries Included | Yes |
Warranty and Support
Warranty Information
This product is covered by a standard return policy. Please refer to your purchase documentation for specific details regarding the warranty period and terms. Typically, products are eligible for return or replacement within 30 days of purchase.
Customer Support
For any questions, technical assistance, or warranty claims, please visit the official DVKNM Store on Amazon or contact their customer service directly. You can find more information and support resources at: DVKNM Amazon Store