1. Important Safety Information
Please read and understand all safety instructions before assembling or using the RANTILA 4 Panel Room Divider. Retain this manual for future reference.
Safety Guidelines
- Always assemble and disassemble the room divider carefully to avoid injury.
- Ensure the room divider is properly balanced and stable before use.
- Do not apply excessive force to the panels while folded or unfolded.
- Keep the room divider away from heat sources and flammable materials.
2. Product Overview
The RANTILA 4 Panel Room Divider is designed to provide privacy and define spaces within indoor environments. It features a sturdy steel frame and non-see-through fabric panels, offering a flexible solution for room separation.
Key Features
- Stable & Durable Structure: Constructed with a powder-coated steel frame for scratch and rust resistance. Features extra-long and wide foot pads for enhanced stability.
- Enhanced Privacy Fabric: Upgraded polyester fabric with PA coating provides privacy, is wrinkle-resistant, wear-resistant, and water-resistant.
- Portable & Flexible Folding Design: Panels are connected with triple-buckle hinges, allowing for adjustable orientation and compact folding for storage.
- Versatile Design: Suitable for various indoor settings such as homes, offices, and public areas.
Product Dimensions
The room divider measures 89 inches in width and 71 inches in height when fully extended. Each foot pad is approximately 17.52 inches long and 4.13 inches wide, contributing to the overall stability.
3. Package Contents
Before assembly, ensure all components listed below are present in your package:
- Required Hardware (screws, connectors)
- Fabric Panels
- Steel Frame Poles
- Foot Pads
4. Assembly Instructions
Follow these steps to assemble your RANTILA 4 Panel Room Divider. It is recommended to have a powered screwdriver for easier assembly.
Step-by-Step Assembly
- Unpack Components: Carefully remove all parts from the packaging and verify against the package contents list.
- Assemble Frame Sections: Connect the steel frame poles for each panel using the provided firm plastic connectors. Ensure all connections are secure.
- Attach Fabric Panels: Slide the fabric panels onto the assembled frame sections. Ensure the fabric is taut and aligned with the frame.
- Install Foot Pads: Attach the extra-long foot pads to the bottom of the end panels using the provided screws. Ensure they are screwed in tightly for maximum stability.
- Connect Panels: Use the triple-buckle hinges to connect the individual panels. This allows for flexible adjustment of the divider's shape.
This image illustrates the assembled room divider, highlighting its stable steel frame and ease of installation. The design allows for simple setup and repositioning.
Detailed view of the components, including the extra-long bases for freestanding stability, the waterproof and stain-resistant fabric, secure screwed-in connections, and robust plastic connectors that join the frame sections.
5. Operation
Folding and Positioning
The RANTILA Room Divider is designed for flexible use and easy storage. Each panel can be adjusted independently due to the triple-buckle hinges.
- To Position: Adjust the angle of each panel to create the desired configuration for privacy or room separation. Ensure the foot pads are flat on the floor for stability.
- To Fold: Collapse the panels inward at the hinges. The design allows for compact folding, reducing the overall footprint for storage.
This image illustrates the three-step process of folding the room divider, showcasing its compact storage capability.
6. Maintenance and Care
Cleaning Instructions
The fabric panels are designed for easy maintenance.
- To clean the fabric, simply wipe with a damp cloth and water.
- Avoid using harsh chemicals or abrasive cleaners, as these may damage the fabric or frame finish.
- Regularly check all screws and connections to ensure they remain tight.
7. Troubleshooting
If you encounter any issues with your room divider, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Divider is unstable or wobbles. | Foot pads not fully tightened or unevenly placed. | Ensure all screws connecting the foot pads are tight. Adjust the position of the foot pads to ensure even weight distribution. |
| Panels do not align correctly during assembly. | Fabric not stretched sufficiently or frame components misaligned. | Recheck the assembly steps. Ensure fabric is pulled taut before securing. Verify that all frame poles are correctly inserted into connectors. |
| Screws do not fit or tighten properly. | Incorrect screw size used or manufacturing defect. | Verify you are using the correct screws for each part. If screws are incompatible or defective, contact customer support for replacements. |
8. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions (Extended) | 89" W x 71" H |
| Brand | RANTILA |
| Model Number | SL27004BK |
| Color | Black |
| Number Of Panels | 4 |
| Material | Metal (Steel Frame), Polyester Fabric with PA coating |
| Recommended Uses | Privacy Screen, Room Separation |
| Special Feature | Blackout, Folding, Freestanding |
| Mounting Type | Floor Mount |
| Indoor Outdoor Usage | Indoor |
| Item Weight | 7.94 Kilograms |
| UPC | 746124205968 |
9. Warranty and Support
Warranty Information
RANTILA is committed to providing functional and quality furniture. If any part is missing or defective during shipping, please contact us immediately. We will send replacement parts at no charge.
Contact Information
For support, questions, or to report missing/defective parts, please contact RANTILA customer service through the platform where you purchased the product. Please provide your order number and a description of the issue for prompt assistance.