Introduction
Thank you for choosing the MiOYOOW Clip On Aquarium Light. This mini dimmable LED spotlight is designed to provide optimal lighting for various aquatic environments, including planted, saltwater, and freshwater fish tanks. Its adjustable features allow for precise control over light direction, brightness, and focal length, enhancing the aesthetic and health of your aquatic setup. Please read this manual carefully before installation and operation to ensure proper use and longevity of your product.
Setup Instructions
- Unpack the Light: Carefully remove all components from the packaging. Verify that all parts are present: the lamp head, support rod, clip, and USB cable with controller.
- Attach the Clip: Ensure the clip is securely attached to the base of the support rod.
- Mount the Light: Position the clip onto the edge of your aquarium. The clip is suitable for glass thickness between 0.3 cm and 1 cm (0.11 inches to 0.39 inches). Ensure the light is stable and securely fastened to prevent accidental detachment.
- Connect Power: Plug the USB connector into a compatible DC 5V USB power source. This can be a mobile phone charging adapter (not included), a power bank, a computer, or a laptop USB port.
Operating Instructions
The MiOYOOW Clip On Aquarium Light features an external controller for easy adjustments.
Control Panel Functions
- ON/OFF Button: Press the power button to turn the light on or off.
- Mode Switch Button: Press the mode button (circle icon) to cycle through the three available lighting modes: Warm White, Neutral White, and Cool White.
- Brightness Adjustment Buttons: Use the '+' button to increase brightness and the '-' button to decrease brightness. There are ten different brightness levels available.
Adjusting Light Settings
- Adjustable Lighting Angle: The supporting rod of the aquarium light can rotate 360 degrees. Gently rotate the flexible support hose to direct the light beam to your desired angle and position within the tank. This allows for precise illumination of specific areas or plants.
- Adjustable Brightness and Color Modes: Use the external controller to select from Warm White, Neutral White, or Cool White lighting modes. Further adjust the intensity using the brightness buttons to achieve the desired illumination level for your aquarium.
- Adjustable Focal Length: The light head can be moved forward and backward to change the illumination range and achieve beam focusing. Push the light head forward to shrink the light beam, creating a more focused spotlight effect. Pull the light head backward to amplify the light beam, providing wider coverage.
Maintenance
- Cleaning: Regularly wipe the lamp head and support rod with a soft, dry cloth to remove dust and water spots. Ensure the light is unplugged before cleaning. Do not use abrasive cleaners or immerse the light in water.
- Lens Care: Keep the LED lens clean for optimal light output. If necessary, gently wipe with a soft, damp cloth and dry thoroughly.
- Cable Inspection: Periodically check the USB cable and controller for any signs of damage, fraying, or wear. If damage is observed, discontinue use and replace the unit.
- Storage: If storing the light for an extended period, ensure it is clean, dry, and stored in a cool, dry place away from direct sunlight.
Troubleshooting
- Light Does Not Turn On:
- Ensure the USB cable is securely connected to both the light and the power source.
- Verify that the USB power source (adapter, power bank, computer) is functioning correctly and providing DC 5V output.
- Press the ON/OFF button on the external controller.
- Light Flickers or is Dim:
- Check the power connection and ensure it is stable.
- Adjust the brightness using the '+' button on the controller.
- Ensure the USB power source provides sufficient power.
- Cannot Change Lighting Mode or Brightness:
- Ensure the light is powered on.
- Press the respective buttons firmly on the external controller. If the controller is unresponsive, try unplugging and re-plugging the USB power.
- Light Beam is Not Focused:
- Adjust the focal length by gently pushing or pulling the light head forward or backward.
Specifications
| Model Number | HM32633-1 |
| Power | 3W |
| Working Voltage | DC 5V (USB powered) |
| Light Source Type | LED |
| Number of Light Sources | 3 |
| Light Colors | Warm White, Neutral White, Cool White |
| Brightness Levels | 10 |
| Material | Plastic + Aluminum Alloy |
| Color | Black |
| Item Weight | 110g (3.52 ounces) |
| Mounting Type | Clip On |
| Compatible Glass Thickness | 0.3cm - 1cm (0.11" - 0.39") |
| Suitable Fish Tank Size | 20cm - 40cm (7.9" - 15.8") |
| Cord Length | 120cm (47.2" / 3.9ft) |
| Dimensions (Lamp Head) | 3cm x 2.3cm (1.1" x 0.9") |
| Dimensions (Support Rod Length) | 15.5cm (6.1") |
| Dimensions (Clip) | 3cm x 2.5cm x 1cm (1.1" x 1" x 0.3") |
Warranty Information
Specific warranty details for the MiOYOOW Clip On Aquarium Light are not provided in this manual. Please refer to the product packaging or contact the retailer/manufacturer directly for information regarding warranty coverage and terms.
Customer Support
For technical assistance, troubleshooting not covered in this manual, or inquiries about your MiOYOOW Clip On Aquarium Light, please contact your retailer or the manufacturer's customer service. Contact information can typically be found on the product packaging or the official MiOYOOW website.