Introduction
Welcome to the world of QANIY Magic Water Elves! This kit provides a fun and creative way for children to make their own 3D water creatures using special gels and molds. Designed for ages 4-8, it encourages imagination and hands-on activity. Please read this manual carefully before starting to ensure a safe and enjoyable experience.
What's in the Box
Your QANIY Magic Water Elf Toy Kit includes the following components:
- 24 Shape Molds (various designs including sea creatures and fruits)
- 20 Magic Gels (10 pure colors, 10 sparkling colors)
- 8 Packs of Magic Powder (Calcium Lactate)
- 24 Dinosaur Eggs
- 1 Piece Net
- 1 Measuring Cup
- 3 Disposable Gloves
- 1 Scale Label
- 1 Toothpick
- 1 Aquarium Bottle
- 1 Instruction Manual
- 1 Storage Box
Image: All components of the QANIY Magic Water Elf Toy Kit, including gels, molds, powders, and accessories, organized within the clear storage box.
Setup Instructions
- Prepare the Solution:
- Add 800ml of cold water and 200ml of hot water to the storage container.
- Add 1 pack of Magic Powder (Calcium Lactate) to the water.
- Stir and mix until the powder is fully dissolved. Ensure no white particles remain. The solution can be reused within 7 days.
- Prepare the Molds:
- Dip a chosen mold into the prepared solution.
- Gently shake the mold while submerged to remove any air bubbles. This ensures a smooth surface for your water elf.
- Remove the mold from the solution and shake off any excess water.
- Fill the Molds:
- Remove the stopper from your desired Magic Gel bottle. Use the toothpick to clear the opening if needed.
- Squeeze the Magic Gel into the mold, filling it completely. You can use single colors or mix multiple colors for unique designs.
Image: A visual guide demonstrating the process of mixing the solution, preparing the molds, and filling them with colored gels.
Video: Official QANIY demonstration of preparing the solution and filling the molds to create Magic Water Elves.
Operating Instructions
- Create the Water Elf:
- Submerge the filled mold into the prepared solution.
- Wait for at least 30 seconds.
- Gently shake the mold until the Magic Gel creature detaches and floats freely in the solution.
- Curing Process:
- Allow the newly formed water elf to sit in the solution for approximately 30-60 minutes to fully set and expand.
- Once cured, use the provided net to carefully remove the water elves from the solution.
- Place them in clean water for play or display in the aquarium bottle.
- Dinosaur Eggs:
- Place the dinosaur eggs in water.
- Wait 5-6 hours for them to hatch and reveal the small dinosaur figures.
Image: A vibrant assortment of finished Magic Water Elves, showcasing different colors and shapes, ready for play.
Video: A detailed guide on how to submerge molds, release the water elves, and the curing process for optimal results.
Image: Colorful dinosaur eggs submerged in water, illustrating the hatching process to reveal small dinosaur toys.
Maintenance
- Cleaning: After use, rinse all molds, tools, and the storage container with clean water. Allow them to air dry completely before storing.
- Solution Storage: The prepared calcium lactate solution can be stored in a sealed container for up to 7 days. Discard if it becomes cloudy or develops an odor.
- Gel Storage: Keep Magic Gel bottles tightly capped and stored in a cool, dry place away from direct sunlight to prevent drying out.
- Water Elf Care: The finished water elves will remain squishy and vibrant as long as they are kept in water. If left out, they will dry out and shrink.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Elf does not form or breaks apart easily. | Insufficient curing time or incorrect solution concentration. | Ensure the water elf cures in the solution for at least 30-60 minutes. Verify water and powder measurements for the solution. |
| Bubbles appear on the water elf. | Air trapped in the mold during filling or insufficient shaking after dipping. | Gently shake the mold in the solution to release bubbles before adding gel. Use a toothpick to remove bubbles from the gel in the mold before submerging. |
| Magic Gel is too thick or hard to squeeze. | Gel may have dried out slightly or is too cold. | Store gels at room temperature. If slightly thick, try warming the bottle gently in warm water (do not microwave). |
| Dinosaur eggs not hatching. | Insufficient time in water. | Allow eggs to soak for the recommended 5-6 hours. Ensure they are fully submerged. |
Specifications
- Brand: QANIY
- Model Name: Elf Powder
- Model Number: QAN-SJL-M24N20
- Age Range: Kid (Ages 4-8 recommended)
- Material Type: Plastic, Silicone
- Item Dimensions (L x W x H): 8 x 6 x 11 inches
- Number of Pieces: 24 (molds)
- Unit Count: 77.0 Count (total items)
- Paint Type: Gel
Warranty and Support
This product comes with a manufacturer's warranty. For any issues, questions, or support needs, please contact QANIY customer service. Refer to the packaging or the original purchase platform for specific contact details. The manufacturer's warranty description is "YES".
For additional Magic Powder refills or other accessories, please visit the QANIY Store on Amazon.