Introduction
This manual provides detailed instructions for the APTMAPT MagSafe Wallet with Find My Tracking. This ultra-slim wallet is designed to securely hold up to three cards, offers RFID protection, and integrates with Apple's Find My network for location tracking. It features strong magnetic attachment and supports wireless charging.
Setup
1. Initial Charging
Before first use, ensure your APTMAPT MagSafe Wallet is fully charged. Connect it to a MagSafe-compatible wireless charger. A full charge takes approximately 1.5 hours and provides up to 6 months of battery life for the Find My feature.
Image: APTMAPT MagSafe Wallet charging wirelessly. Note: Wireless charger is not included.
2. Pairing with Apple Find My
- Enable Bluetooth and Location Services: On your iPhone, navigate to Settings and ensure both Bluetooth and Location Services are turned on.
- Activate Wallet: Press and hold the power button on the APTMAPT MagSafe Wallet until it enters pairing mode (refer to the wallet's LED indicator for status).
- Open Find My App: On your iPhone, open the "Find My" application.
- Add New Item: In the Find My app, tap the "Items" tab, then tap the "+" icon. Select "Add New Item" and then "Other Supported Item." Follow the on-screen prompts to connect your APTMAPT wallet.
Image: Step-by-step guide for pairing the wallet with the Apple Find My app.
Video: Official APTMAPT video demonstrating the Find My functionality and pairing process.
3. Attaching to iPhone and Inserting Cards
Align the wallet with the MagSafe area on the back of your iPhone or MagSafe-compatible case. The strong N52 magnets will securely attach the wallet. Insert up to three cards into the wallet's slot. The bottom cutout allows for easy card access.
Image: Demonstrates inserting cards into the wallet and the bottom access design.
Operating Instructions
Magnetic Attachment
The wallet features upgraded N52 magnets, providing 5 times stronger magnetic force than standard MagSafe wallets. This ensures a secure attachment to your iPhone 12 series and newer, or MagSafe-compatible cases. The dual anti-slip clip design helps hold cards firmly, even with just one card.
Image: Visual representation of the strong magnetic force (4200g) compared to other wallets.
Find My Functionality
Once paired, you can use the Apple Find My app to locate your wallet. Features include:
- Play Sound: Trigger a sound from the wallet to help locate it when nearby (within 160ft/50m Bluetooth range).
- Direction Map: Use the Find My app to get directions to your wallet's last known location.
- Left-Behind Notifications: Receive alerts on your iPhone if you leave your wallet behind.
- Lost Mode: Mark your wallet as lost in the Find My app to display a message and contact information to anyone who finds it.
Image: Illustrates the "Play Sound" feature for nearby location and "Left-Behind Notification" for tracking.
RFID Protection
The wallet includes built-in RFID-blocking technology to protect your credit cards and IDs from unauthorized scanning and digital theft.
Image: Cross-section view highlighting the anti-degaussing lining for RFID protection.
Maintenance
Cleaning
To clean your APTMAPT MagSafe Wallet, use a wet wipe. Gently wipe the exterior surfaces. Avoid using harsh chemicals or abrasive materials, as these may damage the faux leather finish.
Battery Care
The wallet's Find My feature battery lasts up to 6 months on a single charge. Recharge the wallet wirelessly using a MagSafe-compatible charger when the battery is low to ensure continuous tracking functionality.
Troubleshooting
Wallet Not Attaching Securely
- Check Compatibility: Ensure your iPhone is an iPhone 12 series or newer, or that your case is MagSafe-compatible. Non-magnetic cases will prevent proper attachment.
- Clean Surfaces: Ensure both the back of your iPhone/case and the wallet's magnetic surface are clean and free of debris.
- Remove Obstructions: Avoid placing other objects between the wallet and your iPhone/case.
Image: Compatibility guide for iPhone models and case types.
Find My Feature Not Working
- Check Battery: Ensure the wallet's battery is charged. The Find My feature requires power to operate.
- Bluetooth and Location Services: Verify that Bluetooth and Location Services are enabled on your iPhone.
- Re-pair Device: If issues persist, try removing the wallet from the Find My app and re-pairing it according to the setup instructions.
- App Updates: Ensure your iPhone's operating system (iOS 14.5 or above) and the Find My app are up to date.
Cards Difficult to Remove or Falling Out
- Card Capacity: The wallet is designed for up to 3 cards. Overfilling may make cards difficult to remove.
- Proper Insertion: Ensure cards are inserted fully and correctly. The dual anti-slip clips are designed to hold cards securely.
- Use Bottom Cutout: Utilize the bottom cutout to push cards up for easier access.
Specifications
| Brand | APTMAPT |
| Model Name | BL015 |
| Color | Black |
| Material | Faux Leather |
| Dimensions (L x W x H) | 3.71" x 2.53" x 0.38" |
| Weight | 0.07 Kilograms |
| Card Capacity | Up to 3 cards |
| Magnetic Force | 4200g (N52 Magnets) |
| Battery Life (Find My) | Up to 6 months on a 1.5-hour charge |
| Compatibility | iPhone 12 series and newer (iOS 14.5+), MagSafe-compatible devices/cases |
| Special Features | Apple Find My Tracking, RFID Protection, Ultra-Slim Design, Wireless Charging Support |
Warranty and Support
Warranty Information
All APTMAPT products include a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
Customer Support
For frequently asked questions (FAQs) or any product-related issues, please contact APTMAPT customer support. Our team is available 7 days a week, 24 hours a day, via the Amazon message center. Please provide your order number and a detailed description of the issue for prompt assistance.
You can reach us through the Amazon message center by visiting your order history and selecting "Contact Seller" for your APTMAPT MagSafe Wallet purchase.
