FURRIFIC Full Size Bed Frame with Storage Headboard and LED Lights

Introduction

Thank you for choosing the FURRIFIC Full Size Bed Frame with Storage Headboard and LED Lights. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and optimal use of your new bed frame. Please read this manual thoroughly before assembly and retain it for future reference.

Safety Information

• Do not exceed 500 kg weight capacity.
• Exercise caution with sharp edges during assembly and use.
• Ensure all screws and connections are tightened securely before use. Periodically check and re-tighten as necessary.
• Keep children away from small parts during assembly to prevent choking hazards.
• Do not stand on the bed frame.
• Use only the provided hardware for assembly.

Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Upholstered Headboard with Storage and Integrated Charging Station
• Side Rails (Left and Right)
• Footboard
• Center Support Beams
• Wooden Slats
• Support Legs
• Assembly Hardware (Screws, Allen Wrench)
• LED Light Strip and Remote Control

Assembly Instructions

Follow these steps carefully for proper assembly. It is recommended to assemble the bed frame with two people.

Video Guide

Step-by-Step Assembly

1. Install the Power Strip: Attach the power strip (F) to the designated slot on the wooden panel (5) using screws (G). Ensure it is securely fastened.
   

   Image shows the power strip being secured into the wooden panel with screws.

2. Assemble Headboard Frame: Connect the headboard frame components (1, 2, 3, 4) as shown, securing them with screws (C).
   

   Image illustrates the initial assembly of the headboard frame using various numbered parts and screws.
3. Secure Headboard Panels: Attach the wooden panels (5) to the headboard frame using screws (A). Ensure the LED strip is properly routed.
   

   Image shows the wooden panels being attached to the headboard frame, with a close-up of the screw connection.

4. Assemble Side Rails: Connect the side rail components (7, 8, 12) using screws (D). Repeat for both side rails.
   

   Image displays the assembly of the side rails, showing the connection points for the support legs.

5. Attach Footboard Legs: Secure the footboard legs (11) to the footboard (10) using screws (D). Install screws loosely at first, then tighten fully.
   

   Image shows the footboard legs being attached to the footboard, with a note to install screws loosely initially.
6. Connect Side Rails to Footboard: Attach the assembled side rails to the footboard using screws (D). Ensure connections are snug.
   

   Image illustrates the connection of the side rails to the footboard, with a close-up of the corner bracket.

7. Add Center Supports: Install the center support beams (6) and crossbars (4) to the bed frame using screws (D, F, G).
   

   Image shows the placement and securing of the central support structure for the bed frame.

8. Assemble Headboard Storage Compartments: Attach the side panels (18, 19) to the base (17) of the storage compartment using screws (B). Then, attach the power strip (26) to the base (17) using screws (A).
   

   Image shows the assembly of the headboard's internal storage base and the integration of the power strip.
9. Install Headboard Storage Shelves: Attach the shelves (13L, 12R) to the headboard frame using screws (K). Ensure they are level and secure.
   

   Image shows the storage shelves being installed into the headboard, with a close-up of the screw connections.

10. Attach Headboard to Frame: Connect the assembled headboard to the bed frame using screws (E). Install screws loosely at first, then tighten fully. Secure the spring mechanism for the hidden storage.
    

    Image shows the headboard being attached to the main bed frame, with a close-up of the connection point and a note to tighten screws.

11. Install Slats: Place the wooden slats (5) across the bed frame. Ensure they are evenly spaced and secured to the frame.
    

    Image shows the wooden slats being laid across the bed frame, forming the mattress support.

Operating Instructions

LED Lighting

• Connect the LED light strip power cable to a standard electrical outlet.
• Use the provided remote control to turn the LED lights on/off, change colors (over 60,000 options), adjust brightness, select modes (music mode, microphone mode), and set a timer.
• Ensure the remote control has working batteries and is pointed towards the LED receiver.

Integrated Charging Station

• The headboard includes 2 AC outlets, 1 USB-A port, and 1 Type-C port.
• Plug your electronic devices directly into the appropriate ports for convenient charging.
• Ensure the bed frame's main power cable is connected to a functional wall outlet for the charging station to operate.

Maintenance

• Cleaning: Wipe the metal frame with a soft, damp cloth. For upholstered parts, use a fabric cleaner suitable for linen. Avoid harsh chemicals.
• Hardware Check: Periodically inspect all screws and bolts to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent noise.
• LED Lights: If LED lights malfunction, check the power connection and remote control batteries.
• Charging Ports: Keep charging ports free of dust and debris.

Troubleshooting

Specifications

• Brand: FURRIFIC
• Model Number: Base Cama
• Color: Gray
• Product Dimensions: 203 x 138 x 27.5 cm (Length x Width x Height)
• Material: Carbon Steel + Density Board + Polyester Fiber
• Product Weight: 41 kg
• Weight Capacity: Up to 500 kg
• Charging Ports: 2 AC outlets, 1 USB-A port, 1 Type-C port
• LED Lighting: RGB, adjustable color, brightness, mode, and timer via remote control.

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact FURRIFIC customer service directly. Keep your purchase receipt for warranty claims.