Introduction
This manual provides instructions for the installation, operation, and maintenance of the Budora W11614636 2-in-1 Removable Agitator. This agitator is designed for compatibility with various Whirlpool washer machines, offering flexibility for different laundry needs. Please read these instructions carefully before installation and use to ensure proper function and safety.
Safety Information
- Always disconnect power to the washing machine before attempting any installation, removal, or maintenance procedures.
- Wear appropriate personal protective equipment, such as gloves, to prevent injury.
- If you are unsure about any step, consult a qualified technician.
- Keep small parts away from children.
Package Contents
Verify that all components are present and undamaged upon opening the package.
- 1 x Budora W11614636 2-in-1 Removable Agitator
Setup and Installation
Follow these steps to install the agitator in your compatible Whirlpool washing machine.
- Prepare the Washer: Ensure the washing machine is unplugged from the power outlet. Open the washer lid.
- Remove Old Agitator (if applicable): If an old agitator is present, follow your washer's specific instructions for removal. Typically, this involves unscrewing a cap or bolt at the top of the agitator and then pulling the agitator straight up.
- Insert New Agitator: Align the base of the Budora W11614636 agitator with the splined shaft in the center of the washer tub. Gently push the agitator down until it seats firmly. You may need to rotate it slightly to engage the splines.
- Secure the Agitator: Depending on your washer model, secure the agitator with the appropriate cap or bolt (not included with this agitator, use existing washer hardware). Ensure it is tightened securely but do not overtighten.
- Test Installation: Once installed, gently try to lift the agitator to ensure it is securely in place. Reconnect power to the washer.
Image 1: Front view of the Budora W11614636 2-in-1 Removable Agitator. This image shows the overall design with the handle at the top and the spiral fins.
Image 2: Close-up view of the agitator's base, showing the splined connection mechanism designed to engage with the washer's drive shaft.
Operating Instructions
The Budora W11614636 is a 2-in-1 removable agitator. This design allows for flexibility in washing different types of loads.
- Agitator Mode: For standard loads requiring thorough mechanical action, such as heavily soiled clothes, towels, or durable fabrics, ensure the agitator is fully installed. The agitator's fins will provide the necessary scrubbing action.
- Impeller Mode (Agitator Removed): For delicate items, bulky items like comforters, or loads that benefit from more space and gentler washing action, the agitator can be removed. Refer to your washing machine's user manual for instructions on operating in impeller-only mode if the agitator is designed to be removable for this purpose. The "2-in-1" feature implies the washer can function with or without this specific agitator part.
Image 3: Side view of the Budora W11614636 agitator, highlighting its spiral design and handle for easy removal and installation.
Maintenance
Regular maintenance helps ensure the longevity and performance of your agitator.
- Cleaning: Periodically inspect the agitator for lint, debris, or detergent residue. Clean with a soft cloth and mild detergent if necessary. Rinse thoroughly.
- Inspection: Check for any signs of wear, cracks, or damage. If damage is observed, discontinue use and consider replacement.
- Storage (if removed): If the agitator is removed for impeller-only washing, store it in a clean, dry place where it will not be damaged.
Troubleshooting
This section addresses common issues related to agitator installation and function.
| Problem | Possible Cause | Solution |
|---|---|---|
| Agitator is loose or wobbly. | Not properly seated on the drive shaft or securing bolt/cap is loose. | Disconnect power, remove agitator, re-align with the drive shaft, and push down firmly. Ensure any securing hardware is tightened. |
| Agitator does not move during wash cycle. | Incorrect installation, damaged drive shaft, or washer malfunction. | Verify proper installation. If the issue persists, consult your washing machine's manual or a qualified technician. |
| Unusual noise from agitator area. | Debris caught under agitator or improper seating. | Disconnect power, remove agitator, and check for any foreign objects. Reinstall securely. |
Specifications
- Model Number: PL-W11614636
- Part Numbers: W11614636, AP7193565, W11395428
- Item Weight: 1.43 pounds
- Product Dimensions: 14 x 6 x 6 inches
- Included Components: 2 in 1 Removable Agitator
Compatible Washer Models
This agitator is compatible with various Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, and Kenmore washing machines. Specific compatible Whirlpool models include:
- 8TWTW5057PW0
- WTW4957PW0
- WTW5057LW0
- WTW5057LW1
- WTW6157PB0
- WTW6157PW0
- WTW8127LC0
- WTW8127LC1
- WTW8127LW0
- WTW8127LW1
For a comprehensive list of compatible models, please refer to your washing machine's documentation or consult the product listing.
Warranty Information
This Budora W11614636 2-in-1 Removable Agitator comes with a One Year Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, misuse, abuse, or unauthorized modifications. For warranty claims or further details, please contact Budora customer support.
Customer Support
If you have any questions, require assistance with installation, or need to report an issue, please contact Budora customer support. Refer to the product packaging or the retailer's website for contact information.