Generic Bluetooth Remote Control Scrolling Ring User Manual

1. Product Setup and Assembly

The Bluetooth Remote Control Ring comes with a main ring body and four different sizes of silicone rings (16mm, 18mm, 20mm, 22mm) to ensure a comfortable fit for various finger sizes. The main ring body is constructed from metal, while the interchangeable bands are made of skin-friendly silicone.

Assembly Instructions:

1. Select the silicone ring that best fits your finger.
2. Align the mounting holes of the chosen silicone ring with the mounting feet on the main ring body.
3. Gently press the silicone ring onto the main body until it is securely attached and flush on all sides.

2. Charging and Battery Information

The device features magnetic charging for convenience. It is equipped with a 3.7V/17mAh lithium battery.

Charging Details:

• Charging Time: Approximately 1 hour for a full charge.
• Continuous Operation: Up to 7 hours on a full charge.
• Standby Time: More than 1 month.
• Indicator Light: A red light illuminates during charging and turns off when fully charged. The red light will blink to indicate a low battery level.

3. Bluetooth Pairing and Operation Modes

The ring supports Bluetooth 5.3 and can be paired with up to 3 devices simultaneously. It offers an operating range of at least 10 meters.

Pairing Instructions:

1. Ensure the ring is charged.
2. Activate Bluetooth on your device (phone, tablet, laptop, etc.).
3. The ring should appear as 'Ring Control' in your device's Bluetooth settings. Select it to pair.
4. If prompted, confirm the pairing request.

Switching Operation Modes:

The ring provides three distinct operation modes: Browsing Mode, Music Mode, and Mouse Mode. These can be switched by a quick key press on the ring.

Function Operation by Mode:

• Browsing Mode: Slide to control page switching. Double-click and slide up to return to the home page. Click to pause/play media.
• Music Mode: Click to pause/play music. Double-click to 'like' a track. Slide to control volume.
• Mouse Mode: Click the Optical Finger Navigation (OFN) for the left mouse button. Long-press the TS button for 1 second for the right mouse button. This mode is fully supported on laptops and desktop computers. For iOS devices, enable Assistive Touch. Compatibility may vary for some Android devices.

4. Troubleshooting

If you encounter any issues with your Bluetooth Remote Control Ring, please refer to the following common solutions:

• iOS Users - Auxiliary Touch: For optimal performance on iOS devices, ensure the 'Assistive Touch' function is enabled in your device settings. If sliding is not sensitive, verify your finger completely covers the touch area on the ring.
• Bluetooth Pairing Failure: If you are experiencing difficulty pairing the device for the first time, or if it has been previously paired, you may need to clear the current pairing settings on the ring and then attempt to re-pair. To clear current Bluetooth pairing, long-press the TS button for 5 seconds. To clear all pairings, long-press for more than 10 seconds.
• Inappropriate Size: If the ring feels too loose or operation is insensitive, select a different size of silicone ring from the included options to ensure a snug and secure fit.

5. Specifications

6. Warranty and Support

Information regarding product warranty and specific support contacts is not available in this manual. Please refer to the product packaging or the retailer's website for warranty details and customer support options.