IUHFSIFS Hydrogen Water Bottle User Manual

1. Introduction

Thank you for choosing the IUHFSIFS Hydrogen Water Bottle. This device utilizes advanced 2nd generation SPE (Solid Polymer Electrolyte) technology to produce hydrogen-rich water with a concentration of up to 5000 PPB. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your hydrogen water bottle.

Image 1: IUHFSIFS Hydrogen Water Bottle showing the main unit and an optional inhalation accessory.

2. Safety Information

• Do not use with water hotter than 60°C (140°F) as this may damage the device.
• Keep the device out of reach of children.
• Use only the charging cable provided with the device.
• Do not immerse the base unit in water.
• Avoid disassembling or modifying the device.
• Ensure the bottle is securely attached to the base before operation to prevent leaks.

3. Product Overview

The IUHFSIFS Hydrogen Water Bottle consists of a durable borosilicate glass bottle and a base unit containing the electrolysis components and digital display. An optional inhalation accessory may be included.

Image 2: Key components of the hydrogen water bottle. Clockwise from top-left: High-quality borosilicate glass housing, leak-proof aluminum lid, interface for oxygen absorption (inhalation port), and platinum-titanium electrolytic platelets with digital display.

Key Features:

• High Hydrogen Concentration: Achieves up to 5000 PPB (parts per billion) of dissolved hydrogen.
• 2nd Generation SPE Technology: Utilizes a specialized membrane for efficient and rapid hydrogen production, ensuring separation of hydrogen from other gases.
• Purity: Designed to eliminate chlorine, ozone, and heavy metals during the electrolysis process.
• Durable Construction: Made from food-grade borosilicate glass with a leak-proof aluminum lid.
• Digital Display: Shows operational status and timer.

4. Setup

4.1 Unpacking

1. Carefully remove all components from the packaging.
2. Verify that all parts are present: bottle, base unit, charging cable, and any included accessories (e.g., inhalation tube, cleaning brushes).

4.2 Initial Charging

1. Connect the charging cable to the charging port on the base unit.
2. Plug the other end of the cable into a compatible USB power adapter (5V=1A).
3. Allow the device to charge fully for approximately 2 hours before first use. The digital display will indicate charging status.

4.3 First Use Cleaning

1. Unscrew the bottle from the base unit.
2. Wash the glass bottle and lid with warm water and a mild detergent. Rinse thoroughly.
3. Wipe the exterior of the base unit with a damp cloth. Do not submerge the base unit in water.
4. Ensure all parts are dry before reassembly.

4.4 Assembly

1. Place the clean, dry glass bottle onto the base unit.
2. Twist the bottle clockwise until it is securely fastened to the base. Ensure a tight seal to prevent leaks.

5. Operating Instructions

5.1 Filling the Bottle

• Unscrew the lid from the bottle.
• Fill the bottle with potable water. The device supports water with a TDS (Total Dissolved Solids) level up to 1000 PPM. Do not exceed the maximum fill line.
• Screw the lid back onto the bottle securely.

5.2 Generating Hydrogen Water

1. With the bottle filled and securely assembled, press the power button on the base unit.
2. The digital display will activate, showing a countdown timer (typically 5 minutes) and indicating the hydrogen generation process. You will observe small bubbles rising from the electrode.
3. Once the cycle is complete, the device will automatically turn off, and the display will show '0:00'.
4. The hydrogen-rich water is now ready for consumption. For optimal benefits, consume the water within 30 minutes of generation.

Image 3: Illustration of the 2nd generation SPE electrolysis technology, showing the generation of 99.99% pure hydrogen (H2) and the separation of chlorine (CL2), ozone (O3), and hydrogen peroxide (H2O2).

5.3 Using the Inhalation Feature (If applicable)

If your model includes an inhalation accessory:

1. After generating hydrogen water, remove the standard lid.
2. Attach the inhalation accessory to the bottle's opening, ensuring a secure fit.
3. Connect the inhalation tube to the designated port on the accessory (refer to Image 2, 'Interface for oxygen absorption').
4. Follow the instructions provided with the inhalation accessory for proper use.

6. Maintenance

6.1 Regular Cleaning

• After each use, rinse the glass bottle and lid with clean water.
• For a more thorough cleaning, use a soft brush and mild detergent.
• Periodically clean the electrode plate at the bottom of the bottle with a soft brush (e.g., a toothbrush) to remove any mineral buildup. Do not use abrasive cleaners or sharp objects.
• Wipe the exterior of the base unit with a damp cloth. Ensure no water enters the charging port or other openings.

6.2 Battery Care

• To prolong battery life, avoid completely draining the battery frequently.
• Charge the device when the battery indicator is low.
• If storing the device for an extended period, charge it to approximately 50% every few months.

6.3 Storage

• Store the clean and dry hydrogen water bottle in a cool, dry place away from direct sunlight.
• Ensure the bottle is empty before storage.

7. Troubleshooting

• Device not turning on:
  - Check if the battery is charged. Connect the device to the charger and allow it to charge for at least 30 minutes before attempting to turn it on again.
  - Ensure the power button is pressed firmly.
• No hydrogen bubbles or low hydrogen concentration:
  - Ensure the bottle is filled with potable water within the recommended TDS range (up to 1000 PPM). Distilled or excessively purified water may not conduct electricity sufficiently.
  - Verify that the bottle is securely screwed onto the base unit.
  - Clean the electrode plate at the bottom of the bottle to remove any mineral buildup that might impede electrolysis.
  - Ensure the device is fully charged.
• Water leaking from the bottle:
  - Check that the glass bottle is correctly and tightly screwed onto the base unit.
  - Ensure the lid is securely fastened to the bottle.
  - Inspect the silicone seals for any damage or misalignment.
• Digital display not working correctly:
  - Try turning the device off and on again.
  - Charge the device fully. If the issue persists, contact customer support.
• Unusual odors during operation:
  - Ensure the bottle and electrode are thoroughly cleaned regularly.
  - Only use potable water. If the odor persists after cleaning and using fresh water, discontinue use and contact customer support.
• Inhalation feature not working (if applicable):
  - Ensure the inhalation accessory is correctly attached to the bottle and the tube is securely connected to the port.
  - Verify that the hydrogen generation cycle has completed before attempting inhalation.
  - Check for any blockages in the inhalation tube or accessory.

8. Specifications

Image 4: Approximate dimensions of the IUHFSIFS Hydrogen Water Bottle.

9. Warranty and Support

For warranty information, product support, or any inquiries not covered in this manual, please refer to the product packaging or contact IUHFSIFS customer service through the retailer where the product was purchased. Please have your purchase details and model number ready when contacting support.