1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Wipro Garnet 7W Wave Spot Gold COB LED Light. Please read this manual thoroughly before installation and retain it for future reference.
2. Safety Information
WARNING: Risk of electric shock. Installation should only be performed by a qualified electrician.
- Ensure power is disconnected at the main circuit breaker before installation, maintenance, or cleaning.
- Do not attempt to modify the product. Any modifications may void the warranty and pose safety risks.
- This product is designed for indoor use only. Do not expose to moisture or extreme temperatures.
- Ensure the supply voltage matches the product's specified voltage (220-240V).
- Keep packaging materials out of reach of children.
3. Package Contents
Verify that all components are present and undamaged upon opening the package:
- 1 x Wipro Garnet 7W Wave Spot Gold COB LED Light
- 1 x LED Reflector (integrated)
Image 1: Wipro Garnet 7W Wave Spot Gold COB LED Light and its retail packaging.
4. Setup and Installation
Follow these steps for proper installation. Professional installation is recommended.
- Preparation: Turn off the main power supply to the installation area at the circuit breaker.
- Ceiling Opening: Create a suitable circular opening in the ceiling according to the product dimensions (refer to specifications for exact cutout size).
- Wiring: Connect the light fixture's wires to the main electrical supply wires. Ensure correct polarity (Live to Live, Neutral to Neutral). Use appropriate connectors and ensure all connections are secure and insulated.
- Mounting: Gently push the spring clips on the sides of the light fixture upwards and insert the fixture into the ceiling opening. The clips will spring back down to secure the light in place.
- Final Check: Ensure the fixture is flush with the ceiling and securely mounted.
- Power On: Restore power at the main circuit breaker.
Image 2: Close-up of the Wipro Garnet COB LED light, showing its design and mounting clips.
5. Operating Instructions
The Wipro Garnet 7W Wave Spot Gold COB LED Light operates via a standard wall switch connected to its power supply. Once installed and wired correctly:
- Toggle the connected wall switch to the 'ON' position to illuminate the light.
- Toggle the connected wall switch to the 'OFF' position to turn off the light.
This light provides a neutral white (4000K) illumination with a sharp 36-degree beam angle, ideal for focused lighting in various indoor settings.
Image 3: Wipro Garnet COB LED light installed in a ceiling, demonstrating its focused illumination.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your LED light.
- Cleaning: Ensure the power is off before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the light. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Lamp Replacement: This product uses integrated LED technology. The LED light source is not user-replaceable. If the light source fails, the entire fixture should be replaced by a qualified professional.
7. Troubleshooting
If you encounter issues with your Wipro Garnet LED Light, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose wiring; faulty switch. | Check circuit breaker; verify wiring connections (ensure power is off); test the switch. Consult a qualified electrician if unsure. |
| Light flickers. | Unstable power supply; loose connection. | Ensure stable power; check wiring connections (ensure power is off). |
| Light is dim. | Incorrect voltage; product defect. | Verify supply voltage. If problem persists, contact customer support. |
If troubleshooting steps do not resolve the issue, contact Wipro customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Wipro |
| Model Number | DG60740 |
| Wattage | 7 Watts |
| Light Source Type | LED (COB) |
| Light Colour | Neutral White (4000K) |
| Beam Angle | 36 Degrees |
| Voltage | 220-240 Volts |
| High Voltage Protection | Up to 440V |
| Surge Protection | Up to 4 KV |
| Material | Acrylonitrile Butadiene Styrene |
| Product Dimensions | 5.2L x 8.8W x 8.8H Centimeters |
| Item Weight | 160 Grams |
| Indoor/Outdoor Usage | Indoor |
| Mounting Type | Ceiling Mount |
| Country of Origin | India |
Image 4: Key protection and efficiency features of the Wipro Garnet COB LED light.
9. Warranty and Support
Wipro products are designed for durability and performance. For warranty information or technical support, please contact Wipro customer care.
- Manufacturer: Wipro Enterprises Pvt Ltd
- Toll-Free Number: 1800-425-1969
- Email: feedback.wcc@wipro.com
- Address: #8, Wipro House, 80 Feet Rd, Koramangala 1A Block, 1st Block Koramangala, Koramangala, Bengaluru, Karnataka 560034, India
Please retain your purchase receipt as proof of purchase for warranty claims.
