SADENICEL Queen Bed Frame YC-C226-Q-FH User Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your SADENICEL Queen Bed Frame (Model YC-C226-Q-FH). This bed frame features a storage headboard with integrated LED lighting and a charging station, along with two under-bed storage drawers. Please read these instructions carefully before assembly and use to ensure proper function and safety.

2. Safety Information

Please observe the following safety guidelines to prevent injury or damage to the product:

• Do not exceed the maximum weight recommendation of 800 pounds for the bed frame.
• Exercise caution around sharp edges and metal components during assembly and use.
• Always follow the assembly instructions precisely to ensure stability and prevent accidents.
• Use appropriate tools for assembly as specified in the instruction manual.
• Keep small parts out of reach of children during assembly.

3. Package Contents

Verify that all components are present before beginning assembly. The package should include:

• Headboard with integrated LED light strip and power strip (charging station)
• Footboard
• Bed Frame side rails
• Metal slats (10 pieces)
• Support legs (9 pieces)
• Two (2) sliding storage drawers
• Remote control for LED lights
• Assembly hardware (screws, bolts, Allen key, etc.)
• Installation instruction manual

4. Setup and Assembly Instructions

The SADENICEL Queen Bed Frame is designed for easy assembly. All parts and tools are clearly labeled with letters or numbers. Refer to the included installation instruction manual for step-by-step visual guidance.

4.1 General Assembly Steps

1. Unpack all components and verify against the package contents list.
2. Assemble the headboard, attaching the LED light strip and power strip if not pre-installed.
3. Connect the side rails to the headboard and footboard.
4. Install the metal slats. The frame utilizes a hook-and-loop closure system for simplified slat installation. Ensure the EVA silent sponge is applied to minimize noise.
5. Assemble the two storage drawers and insert them under the bed frame.
6. Tighten all connections securely.

4.2 Mattress Placement

The bed frame is designed to accommodate mattresses with a height of 10 to 14 inches. No box spring is required.

5. Operating Instructions

5.1 Integrated Charging Station

The headboard includes a built-in power strip for convenient device charging:

• 2 x AC Outlets: For standard electrical devices.
• 1 x USB Port (5V/2.4A): For charging USB-compatible devices.
• 1 x Type-C Port (5V/3A): For charging Type-C compatible devices.

Simply plug your devices into the appropriate ports. Ensure the bed frame is connected to a wall outlet.

5.2 RGB LED Lights

The headboard features RGB LED lights controllable via the included remote control:

• 12 Colors: Select from a variety of colors to match your preference.
• Brightness Adjustment: Adjust light intensity from 0% to 100%.
• 4 Scene Modes: Choose from pre-set lighting modes.
• Timing Function: Set a timer for the lights to turn off automatically.
• Speed Adjustment: Control the speed of dynamic lighting effects.

Point the remote control towards the headboard's LED receiver to operate the lights.

5.3 Storage Drawers

The two spacious sliding drawers under the bed provide additional storage. They are designed to slide out easily for access to stored items such as bedding, clothing, or other personal belongings.

6. Maintenance

To maintain the appearance and longevity of your bed frame:

• Regularly wipe the frame and upholstered surfaces with a damp cloth.
• Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish or fabric.
• Periodically check all bolts and screws to ensure they remain tight. Retighten if necessary.
• Keep the charging station free from dust and debris.

7. Troubleshooting

If you encounter any issues with your SADENICEL Queen Bed Frame, consider the following:

7.1 Squeaking Noises

• Ensure all assembly bolts are securely tightened.
• Verify that the EVA silent sponge is correctly placed on the metal slats.
• Check for any loose connections between the frame components.

7.2 LED Lights Not Functioning

• Confirm the bed frame is properly plugged into a working wall outlet.
• Check the remote control battery and ensure it is pointed towards the LED receiver.
• Inspect the LED light strip connection to the power source.

7.3 Charging Station Not Working

• Ensure the bed frame's power cord is securely plugged into a functional wall outlet.
• Test the charging station with different devices and cables to rule out device-specific issues.
• Check for any visible damage to the power strip or its connections.

8. Specifications

9. Warranty and Support

For any questions, concerns, or assistance with your SADENICEL Queen Bed Frame, please contact customer support through your Amazon account. Log in to your Amazon account, navigate to "Your Orders," locate the order ID for this product, and click "Contact Seller."

Information regarding specific warranty terms may be available through the seller at the time of purchase or upon request.