1. Introduction
Thank you for choosing the DSNAPE 52 Inch Ceiling Fan with Light. This manual provides essential information for the safe installation, operation, and maintenance of your new ceiling fan. Please read these instructions thoroughly before installation and retain them for future reference.
This ceiling fan features a quiet DC motor, remote and mobile app control, reversible airflow for seasonal use, and a dimmable LED light with three color temperature options (3000K, 4200K, 6500K).
2. Safety Information
WARNING: To reduce the risk of fire, electric shock, or personal injury, always follow these safety guidelines.
- All electrical wiring must be performed by a qualified electrician and comply with all local and national electrical codes.
- Disconnect power at the main circuit breaker or fuse box before beginning installation or performing any maintenance.
- Ensure the installation site can support the fan's weight (approximately 13.57 lbs).
- Do not connect the fan to a dimmer switch or a fan gear switch. Use only the provided remote control or mobile app for operation.
- Maintain a minimum clearance of 7 feet from the floor to the bottom edge of the fan blades.
- Ensure blades are not obstructed by any objects during operation.
- Do not bend the blade holders during installation or cleaning.
- This fan is suitable for indoor and covered outdoor use (not to be exposed directly to rain).
3. Package Contents
Verify that all components listed below are included in your package:
- Ceiling Fan Motor Housing
- Fan Blades (5x)
- LED Light Kit with Bulbs
- Remote Control (2 AAA batteries included)
- Mounting Bracket
- Downrod (if applicable)
- Hardware Pack (screws, washers, wire nuts)
- Instruction Manual
4. Product Overview
The DSNAPE 52 Inch Ceiling Fan is designed for efficient air circulation and customizable lighting in various room types.
Figure 4.1: Product Dimensions and Blade Options
The fan measures 52 inches in diameter and 13.4 inches in height. It features five reversible blades with a dual-tone black and walnut finish, allowing you to choose the aesthetic that best suits your decor. The fan is compatible with both flat ceilings and sloped ceilings up to a maximum angle of 15 degrees.
Figure 4.2: Multi-Function Fan Features
This fan offers 6 adjustable wind speeds, a timing function (1, 3, or 6 hours), a reversible motor for year-round use, and an integrated LED light with 3 color temperature settings (Warm White 3000K, Natural White 4200K, Cool White 6500K).
Figure 4.3: High Efficiency DC Motor
The fan is equipped with a high-efficiency DC motor, providing 6 adjustable speeds and a maximum airflow of 5000 CFM. This motor operates quietly, producing less than 30dB of noise, ensuring a peaceful environment.
Figure 4.4: Memory Function
The fan's light and wind speed settings include a memory function. To save a desired light color, turn on the light and wait for 3-5 seconds while maintaining the desired color. To recall the last setting, turn off the light for more than 10 seconds, and it will return to the previous settings upon reactivation. The wind speed also has a memory function, operating similarly.
5. Setup & Installation
Installation of this ceiling fan requires basic electrical knowledge. If you are unsure about any steps, consult a qualified electrician. A video guide for quick installation with pre-assembled parts is generally available to assist with the process.
5.1 Pre-Installation Checklist
- Ensure power is disconnected at the circuit breaker.
- Confirm you have all necessary tools (screwdriver, wire strippers, ladder, etc.).
- Verify the mounting location is structurally sound and can support the fan.
5.2 Mounting the Fan
- Attach the mounting bracket to the ceiling junction box. Ensure it is securely fastened.
- Assemble the downrod (if using) to the fan motor housing.
- Carefully lift the fan assembly and hang it on the mounting bracket.
5.3 Electrical Connections
- Connect the fan's electrical wires to the household wiring according to local codes (typically black to black, white to white, and green/bare copper to ground).
- Secure all wire connections with wire nuts.
- Tuck all wires neatly into the junction box.
5.4 Attaching Blades and Light Kit
- Attach the fan blades to the motor housing using the provided screws. Ensure they are firmly secured. You can choose either the black or walnut side of the blades.
- Connect the LED light kit wiring to the fan motor wiring.
- Secure the light kit to the bottom of the fan housing.
- Install the light diffuser by twisting or snapping it into place.
5.5 Wall Switch Control Compatibility
Figure 5.1: Wall Switch Compatibility
This fan is suitable for use with conventional on/off wall switches, which can control the fan and light power. NOTE: Do not connect this fan to a dimmer switch or a fan's gear switch, as this can damage the fan's electronics. Wall switch control is not included in the product package.
6. Operating Instructions
Your DSNAPE ceiling fan can be controlled using the included remote control or a dedicated mobile application.
6.1 Remote Control Operation
Figure 6.1: Remote Control Functions
The remote control allows for comprehensive management of your fan and light. Ensure the two AAA batteries are correctly installed. Point the remote towards the fan for optimal response.
- Light ON/OFF: Turns the light on or off.
- Fan OFF: Turns the fan off.
- Speed (1/2/3/4/5/6): Adjusts fan speed from 1 (lowest) to 6 (highest).
- Warm Light (3000K): Sets the light to warm white.
- Natural Light (4200K): Sets the light to natural white.
- Cool Light (6500K): Sets the light to cool white.
- Brightness +/-: Increases or decreases the light brightness (10%-100%).
- Forward/Reverse: Changes the direction of blade rotation for seasonal use.
- Timing Control (1H/3H/6H): Sets the fan to turn off automatically after 1, 3, or 6 hours.
- Sleep Wind: Activates a gentle, quiet wind mode suitable for sleeping.
6.2 Mobile App Control
Figure 6.2: Mobile App Pairing and Control
Control your fan conveniently from your smartphone using the dedicated mobile application.
- Step 1: Download the App. Scan the QR code provided in the image or visit http://www.jasonghost.com/fanlamppro/ to download and install the application.
- Step 2: Add Device. Turn on Bluetooth on your mobile phone. Open the app and click the "+" button on the app interface. Enter your customized device name and click "Confirm."
- Step 3: Pair the Fan. Turn on the fan power. Within 5 seconds of powering on, tap the Bluetooth icon button in the app. If the light blinks or the fan beeps, it means that the phone has been successfully paired with the fan. You can now control the fan via the app.
6.3 Reversible Function (Seasonal Use)
Figure 6.3: Reversible Airflow for Seasonal Comfort
The reversible DC motor allows you to change the direction of the fan blades to optimize comfort year-round.
- Summer Mode (Downward Airflow): Press the "Forward/Reverse" button on the remote or app. Blades rotate counter-clockwise, creating a downward breeze that provides a cooling effect.
- Winter Mode (Upward Airflow): Press the "Forward/Reverse" button again. Blades rotate clockwise, drawing cool air up and pushing warm air down from the ceiling, helping to redistribute heat.
6.4 Wind Speed Recommendations
Figure 6.4: Optimal Wind Speed Settings
Choose the appropriate wind speed for your comfort and activity:
- 1-2 Speeds (Soft Wind): Ideal for sleeping or when a gentle breeze is desired.
- 3-4 Speeds (Natural Wind): Suitable for daily activities and general air circulation.
- 5-6 Speeds (Cool Wind): Provides maximum airflow for hot weather or when strong cooling is needed.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your ceiling fan.
- Cleaning: Periodically clean the fan blades and motor housing with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish.
- Blade Care: Check blade screws periodically to ensure they are tight. Loose blades can cause wobbling and noise.
- Light Kit: The LED light source is integrated and generally not user-replaceable. If the light fails, contact customer support.
- Dusting: Use a soft brush or vacuum cleaner with a brush attachment to remove dust from the fan and light kit.
CAUTION: Always disconnect power to the fan at the circuit breaker before cleaning or performing any maintenance.
8. Troubleshooting
If you experience issues with your ceiling fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power to the fan Loose wire connections Remote control battery low/dead | Check circuit breaker/fuse Verify all wire connections are secure (consult electrician) Replace remote control batteries |
| Light does not work | Loose wire connection to light kit LED light kit failure | Check light kit wiring Contact customer support for replacement |
| Fan wobbles | Loose blade screws Unbalanced blades Loose mounting bracket | Tighten all blade screws Ensure blades are installed evenly; use a balancing kit if necessary Verify mounting bracket is securely fastened to the ceiling |
| Remote control not responding | Batteries low/dead Obstruction between remote and receiver Fan not paired with remote | Replace batteries Ensure clear line of sight Refer to pairing instructions in the manual or app |
| Fan is noisy | Loose screws Motor housing rubbing Unbalanced blades | Check and tighten all screws Ensure no parts are touching the ceiling or other components Balance blades |
9. Specifications
Key technical details for the DSNAPE 52 Inch Ceiling Fan with Light:
| Feature | Detail |
|---|---|
| Model Name | PXDNHM005BK |
| Product Dimensions | 52"D x 52"W x 13.4"H |
| Motor Type | Quiet DC Motor |
| Number of Blades | 5 |
| Air Flow Capacity | 5000 Cubic Feet Per Minute (CFM) |
| Noise Level | 30 Decibels (dB) |
| Number of Power Levels | 6 (Fan Speeds) |
| Light Features | 3-Color Dimmable LED (3000K, 4200K, 6500K) |
| Control Method | Remote Control, Mobile App |
| Reversible Function | Yes |
| Mounting Type | Flush Mount (compatible with flat/sloped ceilings up to 15°) |
| Indoor/Outdoor Usage | Indoor / Covered Outdoor Use |
| Power Source | Electric |
| Item Weight | 13.57 pounds |
| Certifications | CEC, DOE, ETL |
10. Warranty & Support
DSNAPE is committed to providing quality products and customer satisfaction. This product comes with lifetime technical support to ensure a superior customer experience.
For technical assistance, troubleshooting, or warranty claims, please contact DSNAPE customer service through the retailer's platform or visit the official DSNAPE website for contact information.