ZTHY RVBAT850 Replacement Battery User Manual

Introduction

This manual provides essential information for the safe and effective use of your ZTHY RVBAT850 replacement Li-ion battery. This battery is designed to provide reliable power for a wide range of Shark Robot Vacuum models. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your battery.

Safety Information and Battery Care

Adhering to these guidelines will help ensure the safety and extend the lifespan of your battery.

Proper Use

• Avoid Over-charging and Over-discharging: Do not charge the battery until it is completely drained, nor should it be charged continuously for a long time. Charge the battery in a timely manner when the vacuum cleaner indicates low battery; unplug the charger in a timely manner after it is fully charged.

Reasonable Charging

• Use the Original Charger: Always use the original charger that matches your vacuum cleaner to ensure charging voltage, current, and other parameters meet battery requirements. This prevents damage due to mismatch.
• Choose a Suitable Charging Environment: Charging should be carried out in a well-ventilated, dry, and temperature-controlled environment. Avoid charging in high-temperature, humid, or sunny places. The ideal charging temperature is generally between 5℃ - 35℃ (41°F - 95°F).

Battery Maintenance Tips

• Regular Charging: Charge the battery periodically even when the vacuum cleaner isn't in use, to avoid performance loss from excessive self-discharge.
• Deep Charge and Discharge: Perform a deep charge-discharge cycle (fully charge, then use until low but not completely drained) every 2-3 months to boost battery activity and extend lifespan.
• Cleaning: Keep the battery and charger interface clean by regularly removing dust and debris, ensuring good contact and preventing charging issues or overheating.

Storage Methods

• Dry Storage: If the vacuum cleaner needs to be stored for a long time, the battery should be fully charged first, and then stored in a dry and cool environment. Avoid storing the battery in a humid or corrosive-gas-containing place.

The ZTHY RVBAT850 battery features multiple safety protections, including safeguards against short-circuit, overheating, overvoltage, and overdischarge, ensuring reliable and safe operation.

Specifications

Detailed view of the battery's key specifications as printed on its label.

The 2800mAh high capacity battery provides extended runtime for your Shark vacuum cleaner, typically lasting 120-180 minutes depending on the model and age of the machine.

Physical dimensions of the RVBAT850 battery, measuring approximately 2.75 inches in length and 1.37 inches in height.

Compatibility

The ZTHY RVBAT850 battery is compatible with a wide range of Shark Robot Vacuum models. It features a 2-prong connector. Please verify your vacuum's original battery connector type before purchase and installation.

Ensure your original battery connector is a 2-prong plug for compatibility with the RVBAT850.

Compatible Shark Robot Vacuum Models (Partial List):

• Shark Ion RV700 Series: RV700_N, RV720_N, RV725, RV725_N, RV750_N, RV750CA, RV750R00US, RV750R01US, RV750R31US, RV754, RV754X01US, RV761, RV761_N, RV761C, RV761CA, RV761NP, RV761R00US, RV761R01CA, RV761R01US, RV761R31CA, RV761R31US, RV763, RV763X01US, RV765, RV765X01US, RV771, RV771R00US, RV771R01US, RV771R31US, RV772, RV772X01US
• Shark Ion RV850 Series: RV850, RV850BRN, RV850C, RV850W, RV850WV, RV851WV, RV852WVC, RV852WVQBL, RV852WVQBR, RV852WVQPL, RV852WVQPR, RV852WVQRG, RV871, RV871C, RV871R, RV871RC
• Shark Ion RV910/990 Series: RV9113A1US, RV910S, RV9106WXUS, RV911AE, RV9116ZXUS, RV9122S1US, RV9123S1US, RV912S, RV9126WXUS, RV915S, RV9156WXUS, RV990, RV9905VXUS, RV991, RV9915VXUS, SS100, SS101
• Shark Ion RV1000/1100/1500 Series: RV1000, RV1000AE, RV1000S, RV1001, RV1001AE, RV1001AEC, RV1001AECM, RV1001AEES, RV1001AENP, RV1001AEVM, RV1001AEWK, RV1100S1CA, RV1100S1US, RV1100SRCA, RV1100SRUS, RV1100VRCA, RV1100VRUS, RV1101A1CA, RV1101A1US, RV1101ARCA, RV1101ARUS, RV1500ZXUS
• Shark Ion RV2300/2400/2500/2600 Series: RV2300, RV2300S, RV2310, RV2310AE, RV2320S, RV2360AE, RV2360S, RV2400WD, RV2400WS, RV240BLXUS, RV2402WD, RV2402WXUS, RV2410WD, RV2502AE, RV2502AECA, RV2511AECA, RV2600WA, RV2600WD, RV2600WS, RV2610WA, RV2610WD, RV2610WDCA, RV2620WD, RV2302, RV2303, RV2302AE, RV2303AE, RV24002DUS, RV24022DUS, RV26202EUS, RV2610WDCA, RV2620WDCA, RV26102ECA, RV26202ECA, RV2410WD, RV24102DUS, RV2610WD, RV26102EUS
• Shark Ion UR Series: UR1000SR, UR1005AE, UR1005SR, UR1100S1US, UR1100SRUS, UR1105A1US, UR1105ARUS, UR1110A1CA, UR1110ARCA, UR1505WXUS, UR2350AE, UR2360S, UR2450WD, UR2500SR, UR755, UR755X01US, UR2450WS, UR24503DUS, UR2410WD, UR24102DUS
• Shark Ion AV Series: AV1010AE, AV1102A1US, AV1102ARUS, AV1110A1US, AV1110ARUS, AV2310, AV2310AE, AV2501AE, AV2501S, AV2511AE, AV2610WA, AV2610WACA, AV751, AV751R00US, AV751R01US, AV751R31US, AV752, AV752R00US, AV752R01US, AV752R31US, AV752X01US, AV753, AV753R00US, AV753R01US, AV753R31US, AV753X01US, AV9112S1US, AV9113S1US, AV911S, AV970, AV970GV1US, AV970GVRUS, AV26101EUS, AV26101ECA, AV2610WS, AV26103EUS, AV2620WA, AV2630WA, AV26201EUS, AV26301EUS
• Shark Ion QR Series: CO351B, CO101B, QR1000S, QR1000SB, QR1000SG, QR1000SW, QR1100S1US, QR1100SRUS, QR1G00S1US, QR1G00SRUS, QR1W00S1US, QR1W00SRUS

The RVBAT850 battery is suitable for a wide range of Shark robot vacuum models, ensuring full compatibility and high stability.

Installation Guide

Replacing the battery in your Shark Robot Vacuum is a straightforward process. Always ensure the vacuum is powered off and disconnected from its charging base before beginning.

The RVBAT850 battery comes with a screwdriver for convenient installation.

1. Power Off and Disconnect: Turn off your Shark Robot Vacuum and remove it from its charging dock or power outlet.
2. Locate Battery Compartment: Flip the robot vacuum over. The battery compartment is typically located on the underside and secured by screws.
3. Remove Screws: Use a Phillips head screwdriver (often included with the battery) to carefully remove the screws securing the battery compartment cover. Keep the screws in a safe place.
4. Remove Old Battery: Gently lift the battery compartment cover. Disconnect the old battery by carefully pulling its 2-prong connector from the vacuum's port.
5. Insert New Battery: Align the 2-prong connector of the new ZTHY RVBAT850 battery with the port inside the vacuum's battery compartment. Push firmly until it clicks into place. Ensure the battery is seated correctly within the compartment.
6. Replace Cover and Secure: Place the battery compartment cover back into position and secure it with the screws you removed earlier. Do not overtighten.
7. Initial Charge: Place your robot vacuum back on its charging dock. Allow the battery to fully charge before its first use. This initial charge helps calibrate the battery.

Operation

Once the ZTHY RVBAT850 battery is installed and fully charged, your Shark Robot Vacuum will operate as usual. The battery provides the necessary power for the vacuum's cleaning cycles, navigation, and other functions.

• Automatic Operation: The robot vacuum will manage battery usage automatically, returning to its charging dock when power is low.
• Runtime: Expect a typical runtime of 120-180 minutes on a full charge, though actual duration may vary based on vacuum model, floor type, and cleaning mode.
• Charging Indicators: Refer to your Shark Robot Vacuum's original user manual for specific LED indicators or app notifications regarding battery status and charging progress.

Troubleshooting

If you encounter issues after installing your new battery, consider the following common troubleshooting steps:

• Vacuum Not Turning On:
  • Ensure the battery is fully charged.
  • Verify the battery connector is securely plugged into the vacuum.
  • Check that the battery compartment cover is properly closed and secured.
• Short Runtime:
  • Confirm the battery received a full charge.
  • Ensure the charging contacts on both the vacuum and the dock are clean and free of debris.
  • Perform a deep charge-discharge cycle as described in the "Battery Maintenance Tips" section.
• Charging Issues:
  • Check the power connection to the charging dock.
  • Clean the charging contacts on the vacuum and the dock with a dry cloth.
  • Ensure the charging environment temperature is within the recommended range (5℃ - 35℃).
• Error Messages:
  • Refer to your Shark Robot Vacuum's original user manual for specific error codes and their meanings.
  • A factory reset of the vacuum (if applicable) can sometimes resolve software-related battery issues.

If problems persist after attempting these steps, please contact ZTHY customer support for further assistance.

Warranty and Support

ZTHY is committed to providing high-quality products. For any questions, concerns, or technical support regarding your RVBAT850 replacement battery, please contact ZTHY customer service through the retailer where you purchased the product or visit the official ZTHY brand store online. Please have your product model number (RVBAT850) and purchase details ready when contacting support.

For information on warranty coverage, please refer to the product listing or contact ZTHY directly. Keep your proof of purchase for warranty claims.