LUE BONA 26 Inch Counter Height Bar Stools User Manual

1. Safety Information

Please read and understand all safety instructions before assembly and use. Retain this manual for future reference.

• Maximum Weight Capacity: Do not exceed the maximum weight recommendation of 330 pounds (150 kg) per stool. Exceeding this limit may result in injury or damage to the product.
• Stable Surface: Always use the bar stools on a flat, stable, and level surface to prevent tipping.
• Regular Inspection: Periodically check all bolts and screws to ensure they are tight and secure. Re-tighten as necessary.
• Avoid Standing: Do not stand on the bar stools.
• Children: Supervise children when they are using the bar stools.

2. Product Overview

The LUE BONA 26 Inch Counter Height Bar Stools are designed for comfort and durability, featuring faux leather upholstery and a sturdy metal frame. They are suitable for kitchen counters and islands.

Image: LUE BONA 26 Inch Counter Height Bar Stools in a kitchen setting.

Key Features

• Super Padded Cushion: Cushion thickness up to 2.5 inches for maximum comfort. Made of breathable faux leather for easy cleaning.
• Anti-Slip Protector: Features an anti-slip protector to prevent floor damage, reduce noise, and enhance stability.
• Sturdy and Comfortable: Constructed with a black powder-coated tubular metal frame, designed to hold up to 330 pounds. Ergonomic backs and comfortable seats provide excellent support.
• Modern Design: Sleek and contemporary design suitable for various interior styles.

Product Dimensions

Image: Detailed dimensions of the bar stool.

• Seat Height: 26.5 inches (suitable for 36-39 inch height kitchen islands)
• Seating Size: 17.8 inches (W) x 16 inches (D)
• Seating-Footrest Height: 17.2 inches
• Footrest-Floor Height: 9.3 inches
• Overall Product Dimensions: 16"D x 17.8"W x 35.8"H

Product Display Video

3. Setup and Assembly

The LUE BONA bar stools are designed for quick and easy assembly, typically completed in under 10 minutes per stool. All necessary hardware and tools are included.

Required Tools

• Hex Key (included)

Assembly Steps

Image: Assembly diagram for the bar stool.

1. Step 1: Attach Base Frames (Part 2 & 3). Align the two base frames (labeled 2 and 3). Insert screws (Type A) from the outside into the designated holes. Tighten these screws to approximately 80% of full tightness.
2. Step 2: Secure Seat to Base (Part 1). Place the seat (Part 1) upside down, ensuring the pre-drilled holes face upward. Position the assembled base frames (from Step 1) onto the underside of the seat, aligning the holes. Insert screws (Type A) from the outside into the designated holes. Tighten these screws to approximately 80% of full tightness.
3. Step 3: Install Footrest Bars (Part 4 & 5). Identify the front (Part 5) and rear (Part 4) footrest bars. Insert Part 5 into the front holes of the base frame and Part 4 into the rear holes. Ensure they are correctly oriented. Tighten the screws (Type B) from the outside into the designated holes to approximately 80% of full tightness.
4. Step 4: Final Tightening. Once all parts are in place and partially tightened, go back and tighten all screws (Type C) to 100% to ensure maximum stability and security.
5. Step 5: Attach Foot Caps. Place the plastic foot caps onto the bottom of the stool legs to protect your floor.

Assembly Video

4. Operating and Use

To ensure safe and comfortable use of your LUE BONA bar stools, please observe the following guidelines:

• Proper Placement: Always place the bar stool on a flat, stable, and non-slippery surface.
• Weight Distribution: Sit centrally on the seat to distribute weight evenly and maintain stability.
• Moving the Stool: When moving the stool, lift it rather than dragging to prevent damage to the floor and the stool's legs.
• Footrest Use: Utilize the integrated footrest for added comfort and support, especially during extended sitting periods.

5. Maintenance

Regular maintenance will help preserve the appearance and extend the lifespan of your LUE BONA bar stools.

Cleaning

• Faux Leather Upholstery: Wipe clean with a soft, damp cloth. For tougher stains, use a mild soap solution and immediately wipe dry. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the material.
• Metal Frame: Clean the powder-coated metal frame with a soft, dry cloth.

General Care

• Tighten Fasteners: Periodically check and re-tighten all assembly screws and bolts to ensure the stool remains stable.
• Environmental Exposure: Avoid prolonged exposure to direct sunlight, excessive heat, or extreme humidity, which can cause fading or material degradation.
• Floor Protection: The bar stools are equipped with anti-slip protectors. Ensure these are intact and replace if damaged to prevent floor scratches and maintain stability.

Image: Anti-slip protector detail.

6. Troubleshooting

If you encounter any issues with your LUE BONA bar stools, refer to the following common problems and solutions:

Wobbly Stool

• Solution: Ensure all assembly screws are fully and evenly tightened. Check if the stool is placed on an uneven surface; adjust if necessary.

Squeaking Noises

• Solution: Re-tighten all screws. If the noise persists, disassemble the affected joint, apply a small amount of silicone-based lubricant (not oil-based) to the contact points, and reassemble.

Difficulty Assembling

• Solution: Review the assembly instructions and video carefully. Ensure parts are oriented correctly. Do not fully tighten screws until all parts are loosely assembled.

7. Specifications

8. Warranty and Support

LUE BONA is committed to providing high-quality products. For specific warranty details, product support, or to report any issues, please contact LUE BONA customer service directly through the retailer where the product was purchased or visit the official LUE BONA website.

Contact Information: Please refer to your purchase documentation or the retailer's website for the most current customer service contact details.