Electronic Rat and Mouse Zapper

Introduction

The ZAPPTRONIX Electronic Rat and Mouse Zapper provides an efficient and humane solution for indoor rodent control. This device utilizes a high-voltage shock to eliminate rodents quickly and cleanly, offering a no-touch disposal method. Designed for ease of use and discreet placement, it is an ideal alternative to traditional traps and poisons for homes, garages, and businesses.

Image: The ZAPPTRONIX Electronic Rat and Mouse Zapper, a black rectangular device with an on/off switch and a red indicator light on the front.

Important Safety Information

• High Voltage Hazard: This device operates with high voltage. Exercise extreme caution.
• Keep Away from Children and Pets: Place the zapper in areas inaccessible to children and non-target animals to prevent accidental contact.
• Power Off Before Touching: Always turn the device OFF and remove batteries before handling, cleaning, or disposing of rodents.
• Indoor Use Only: This product is designed exclusively for indoor use. Do not expose to water or high humidity.
• Do Not Immerse: Never immerse the zapper in water or any other liquid.
• Use as Intended: Only use the device for its intended purpose of rodent control.

Product Components

Familiarize yourself with the key parts of your Electronic Rat and Mouse Zapper:

• Entry Door: Where rodents enter the trap.
• High Voltage Metal Plates: Internal plates that deliver the electric shock.
• Bait Slot/Cup: Area for placing bait to attract rodents.
• ON/OFF Switch: Controls the power to the device.
• LED Indicator: Provides visual alerts for capture and battery status.
• Removable Top Cover: Allows for easy disposal and cleaning.
• Battery Compartment: Located at the bottom for 4xAA batteries.

Image: Side view of the ZAPPTRONIX Electronic Rat and Mouse Zapper, showing its compact design.

Setup Instructions

1. Install Batteries: Open the battery compartment on the bottom of the unit. Insert four (4) AA batteries, ensuring correct polarity. Close the compartment securely.
2. Open Sliding Cover: Gently slide open the top cover of the zapper to access the bait slot.
3. Place Bait: Apply a small amount of high-protein bait (e.g., peanut butter, chocolate spread, nuts, or meat) into the integrated bait cup located at the rear of the trap. Ensure bait does not touch the metal plates.
4. Close Cover: Slide the top cover back into its closed position.

Image: Visual guide showing how to open the sliding cover and place bait (sugar, cheese, nuts, cookie, meat) inside the zapper.

Operating Instructions

1. Position the Zapper: Place the zapper along a wall in areas where rodent activity is observed. Rodents tend to travel along walls. Ensure the entry door faces the wall.
2. Activate the Device: Flip the ON/OFF switch to the 'ON' position. The LED indicator will briefly flash green, indicating the device is active and ready.
3. Monitoring: The LED indicator will signal when a catch occurs. A red light indicates a successful capture.
4. Disposal: Once a rodent is captured (indicated by the red LED), turn the ON/OFF switch to the 'OFF' position. Lift the zapper and empty the deceased rodent into a waste bin. The magnetic, removable lid ensures no direct contact is needed.
5. Reset: After disposal, you can re-bait if necessary and turn the switch back to 'ON' to continue operation.

Image: Visual guide showing how to turn on the zapper and the meaning of the LED indicators (blue for charging/ready, red for capture).

Image: Overhead view of a house layout with lightning bolt icons indicating recommended indoor placement locations for the zapper, emphasizing 'INDOOR USE ONLY'.

Maintenance

• Cleaning: After each use, especially if the bait area becomes soiled, turn the device OFF and remove batteries. Detach the top cover and wipe down the interior and metal plates with a dry cloth or paper towel. Do not use water or cleaning solutions.
• Battery Replacement: The LED indicator will signal when batteries are low. Replace all four AA batteries simultaneously to ensure optimal performance.
• Storage: When not in use, ensure the device is OFF and batteries are removed. Store in a cool, dry place away from direct sunlight and moisture.

Troubleshooting

Specifications

• Model Number: mk08
• Brand: ZAPPTRONIX
• Dimensions: 25.4 x 7.62 x 10.16 cm (10 x 3 x 4 inches)
• Weight: 699 g (1.54 lbs)
• Power Source: 4 x AA Batteries (not included)
• Material: Plastic
• Color: Black
• Manufacturer: Ningbo Getter Electronics Co .,Ltd.

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official ZAPPTRONIX website. Please have your model number (mk08) and purchase date ready when contacting support.

Manufacturer: Ningbo Getter Electronics Co .,Ltd.