WORX Nitro WG745E 40V Cordless Lawnmower User Manual

1. Introduction

Thank you for choosing the WORX Nitro WG745E 40V Cordless Lawnmower. This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your new lawnmower. Please read this manual thoroughly before first use and keep it for future reference.

The WORX Nitro WG745E is a powerful and efficient battery-powered lawnmower designed for lawns up to 600 m². It features a 41 cm cutting diameter, a 50-liter grass collection bag, and a precise edge-cutting function. Powered by two 20V 4Ah Pro batteries, it offers 6 adjustable cutting heights ranging from 25 mm to 75 mm, ensuring a clean and consistent cut.

Image 1.1: The WORX Nitro WG745E cordless lawnmower in operation, demonstrating its efficient cutting on a well-maintained lawn.

2. Safety Instructions

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using this appliance.

• Read the entire manual: Understand all instructions before operating the lawnmower.
• Wear appropriate personal protective equipment (PPE): Always wear safety glasses, sturdy footwear, and long trousers. Hearing protection is recommended.
• Keep bystanders away: Ensure children, pets, and other people are at a safe distance from the operating area.
• Inspect the work area: Remove any objects such as stones, sticks, wires, or toys that could be thrown by the blade.
• Disconnect power: Always remove the battery pack and safety key before cleaning, adjusting, or performing any maintenance.
• Do not operate in wet conditions: Avoid using the lawnmower in rain or on wet grass to prevent slipping and electrical hazards.
• Maintain a firm grip: Always hold the handle firmly with both hands during operation.
• Never lift or carry the mower while it is running.
• Be aware of the blade: The blade continues to rotate for a short period after the motor is switched off.

3. What's in the Box

Carefully unpack all components and check against the list below. If any parts are missing or damaged, contact your retailer.

Image 3.1: Components included in the WORX Nitro WG745E package.

• WORX Nitro WG745E 40V Cordless Lawnmower
• 2 x 20V 4Ah Pro Batteries
• 1 x 4A Dual Charger
• 1 x Grass Collection Bag (50 Liters)
• 1 x 41 cm Mowing Blade (pre-installed or separate)
• 1 x User Manual

4. Setup

4.1 Handle Assembly

1. Unfold the lower handle section and secure it using the quick-release clamps.
2. Attach the upper handle section to the lower section, ensuring the cables are not pinched. Secure with the provided knobs.

4.2 Grass Collection Bag Assembly

1. Assemble the grass bag frame and attach the fabric bag.
2. Lift the rear discharge flap of the lawnmower and hook the grass bag onto the mower body. Ensure it is securely seated.

4.3 Battery Installation

1. Open the battery compartment cover on top of the mower.
2. Insert both 20V 4Ah Pro batteries into their respective slots until they click into place.
3. Close the battery compartment cover.

Video 4.1: Practical demonstration of product setup and battery installation. This video illustrates how to prepare the lawnmower for use, including securing the handle and inserting the batteries.

4.4 Cutting Height Adjustment

1. Ensure the lawnmower is switched off and the safety key is removed.
2. Locate the cutting height adjustment lever on the side of the mower deck.
3. Pull the lever outwards and move it to the desired height setting. The WG745E offers 6 cutting height positions from 25 mm to 75 mm.
4. Release the lever to lock it into position. Ensure all wheels are at the same height.

5. Operating Instructions

5.1 Starting and Stopping the Lawnmower

1. Ensure batteries are fully charged and correctly installed, and the safety key is inserted.
2. Press and hold the safety button on the handle.
3. While holding the safety button, pull the bail lever towards the handle. The motor will start.
4. To stop the lawnmower, release the bail lever. The motor will stop immediately.
5. Always remove the safety key and batteries when leaving the mower unattended or before any adjustments.

5.2 Mowing Techniques

• General Mowing: For best results, mow in straight, overlapping lines. Overlap each pass by a few centimeters to ensure even coverage.
• Edge Cutting: The WG745E features a design that allows for close cutting to edges, reducing the need for additional trimming. Guide the mower along the perimeter of your lawn.

Image 5.1: The WORX Nitro WG745E demonstrating its edge-cutting capability, minimizing the need for additional trimming.

• Grass Collection: Monitor the grass bag fill indicator. Empty the grass bag when it is full to maintain optimal collection performance.
• Mulching (if applicable): If your model supports mulching, ensure the mulching plug is inserted and the grass bag is removed. The mower will finely chop grass clippings and return them to the lawn as natural fertilizer.

Image 5.2: The 2-in-1 mulching and collection system of the WORX Nitro WG745E.

6. Maintenance

Regular maintenance ensures optimal performance and extends the life of your lawnmower. Always remove the safety key and batteries before performing any maintenance.

6.1 Cleaning

• After each use, clean the mower deck, grass collection bag, and wheels. Use a brush or cloth to remove grass clippings and debris.
• Do not use water jets or high-pressure cleaners directly on the mower.
• Ensure all ventilation openings are clear of debris to prevent overheating.

6.2 Blade Care

• Regularly inspect the blade for sharpness, cracks, or damage. A dull or damaged blade can lead to poor cutting performance and excessive vibration.
• If the blade is dull, it can be sharpened by a qualified service technician. If it is damaged, it must be replaced with a genuine WORX replacement blade.
• When replacing the blade, ensure the new blade is balanced to prevent vibration.

6.3 Battery Care

• Always use the WORX 4A Dual Charger provided to charge your 20V 4Ah Pro batteries.
• Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
• For long-term storage, charge batteries to approximately 50% and recharge every 3-6 months to maintain battery health.

Video 6.1: Overview of the Worx Powershare PRO Battery system, highlighting its features and care.

7. Troubleshooting

This section addresses common issues you might encounter. For problems not listed here, contact customer support.

8. Specifications

Image 8.1: Illustration of the WORX Nitro Brushless Motor 2.0, emphasizing its enhanced power and efficiency.

9. Warranty and Support

The WORX Nitro WG745E lawnmower comes with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms, conditions, and registration details. Keep your proof of purchase for warranty claims.

For technical assistance, spare parts, or any questions regarding your product, please contact WORX customer support. Contact information can typically be found on the WORX official website or on the product packaging.