Introduction
Thank you for purchasing the AIDENOEY Fully Dimmable Floor Lamp. This manual provides essential information for the safe assembly, operation, and maintenance of your new lamp. Please read these instructions thoroughly before use and retain them for future reference.
Safety Information
- Ensure the power is off before assembly, installation, or maintenance.
- Do not connect electricity until your fixture is fully assembled.
- To reduce the risk of fire, electric shock, or personal injury, always turn off and unplug the fixture and allow it to cool before replacing the light bulb.
- Do not touch the bulb when the fixture is turned on.
- Keep flammable materials away from the light bulb.
- Use only the specified bulb type and wattage.
- This product is for indoor use only.
Package Contents
- 1x Floor Lamp Base
- 1x Lamp Pole Sections
- 1x Lampshade (unassembled)
- 1x Side Table (attached to pole section)
- 1x 9W LED Bulb (3000K warm light)
- 1x Rotary On-Off Switch (integrated)
Assembly Instructions
Follow these steps to assemble your AIDENOEY Floor Lamp. No special tools are required.
- Assemble the Lampshade: The lampshade comes rolled up. Fasten the support rings to the inside of the lampshade using the clips. Once the support is assembled, tighten the edge of the lampshade using the Velcro strip to form a cylindrical shape.
- Attach the Base: Hold the heavy metal base down and carefully screw the first light pole section into the base by turning it clockwise. Ensure the power cord is pulled through the pole as you assemble.
- Connect Pole Sections: Continue to screw the remaining pole sections together clockwise, ensuring the power cord is threaded through each section. One section includes the side table.
- Install the Lamp Head: Finally, tighten the top bend light pole section, which contains the lamp socket, onto the last straight pole section.
- Secure the Lampshade: Rotate to remove the lamp cup outer protective cover from the socket. Place the assembled lampshade over the socket and secure it by turning the lamp cup protective cover back onto the socket, tightening it firmly.
- Install the Bulb: Carefully screw the included 9W LED bulb into the lamp socket.
Video: Floor lamp installation and display. This video demonstrates the step-by-step assembly process of the floor lamp, including connecting the pole sections, attaching the lampshade, and installing the bulb.
Image: This image illustrates the key structural components of the lamp, highlighting the integrated side table and the stable 11-inch diameter metal base.
Operating Instructions
- Power On/Off and Dimming: The lamp features a rotary dimmer switch located on the pole. Turn the knob clockwise to turn the lamp on and increase brightness. Turn it counter-clockwise to dim the light and turn it off. The dimming range is 0-100%, allowing for smooth adjustment from a soft night-light glow to full brightness.
- Adjustable Lamp Head: The lamp head can swivel 359° horizontally and tilt 90° vertically. This allows you to direct the light precisely where needed for reading, working, or ambient illumination. The joints are designed to hold their position once set.
- Side Table Functionality: The built-in side table provides a convenient surface for small items such as a coffee mug, TV remote, phone, or a book, without occupying additional floor space.
Video: Elegant. This short video demonstrates the dimming function of the lamp, showing the light intensity changing from off to bright.
Image: This image visually explains the stepless dimming feature, showing different brightness levels achievable with the rotary switch.
Image: This image demonstrates the adjustable lamp head, illustrating its 359° swivel and 90° tilt capabilities for directing light.
Maintenance
- Cleaning: To clean the lamp, ensure it is unplugged and cool. Wipe the metal parts with a soft, dry cloth. For the fabric lampshade, use a lint roller or a soft brush to remove dust. Do not use abrasive cleaners or solvents.
- Bulb Replacement: Always ensure the lamp is unplugged and the bulb is cool before attempting to replace it. This lamp uses a standard E26 base dimmable bulb, up to 60W.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up | 1. Power cord not plugged in 2. Bulb is loose or faulty 3. Power outlet is not working | 1. Ensure the power cord is securely plugged into an active outlet. 2. Tighten the bulb or replace it with a new one. 3. Test the outlet with another device. |
| Light flickers or dims inconsistently | 1. Loose bulb connection 2. Incompatible dimmable bulb 3. Faulty dimmer switch | 1. Tighten the bulb in the socket. 2. Ensure you are using a dimmable E26 LED bulb. 3. Contact customer support if the issue persists. |
| Lamp is unstable | 1. Pole sections not fully tightened 2. Uneven surface | 1. Ensure all pole sections are securely screwed together. 2. Place the lamp on a flat, stable surface. |
Specifications
- Model Number: HYZC0203
- Product Dimensions: 11"D x 15.7"W x 66.1"H
- Item Weight: 11 Pounds
- Material Type: Linen, Metal, Wood
- Finish Type: Painted (Gold-1)
- Shade Material: Fabric (Linen Beige)
- Base Material: Metal
- Base Diameter: 11 Inches
- Light Source Type: LED
- Bulb Base: E26
- Wattage: 9 watts (included LED bulb), up to 60W (compatible dimmable bulbs)
- Voltage: 110 Volts
- Switch Type: Rotary Dimmer
- Adjustable Lamp Head: 359° Swivel, 90° Tilt
- Side Table Load Capacity: 8 lbs
- Indoor/Outdoor Usage: Indoor Only
Image: This image provides a detailed visual representation of the lamp's dimensions and highlights the included dimmable LED bulb.
Warranty and Support
This AIDENOEY Floor Lamp is backed by a 3-year warranty. For any product inquiries, technical assistance, or warranty claims, please contact AIDENOEY customer support. Our 24/7 customer support team is available to assist you.
Visit the AIDENOEY Store for more information.