1. Introduction and Overview
Thank you for choosing the Abesee Automatic Upper Arm Blood Pressure Monitor. This device is designed for easy and accurate blood pressure measurement at home. It features a large backlit display, advanced measurement techniques, and memory functions for two users.
- Simple Operation: Track your blood pressure daily with a single button press. Measurements are typically completed within 30 seconds.
- Easy-to-Read Display: A large 4.3-inch backlit display ensures comfortable reading, especially for the elderly.
- Accurate Measurement: Utilizes advanced techniques for fast and accurate results, with four color themes to indicate blood pressure status.
- Memory and User Modes: Supports two independent users, each storing up to 99 memory sets.
- Large Adjustable Cuff: Fits most adult arms with a circumference of 8.7" to 16.5", made from durable and easy-to-clean materials.
2. Setup
2.1 Power Supply
The monitor can be powered by 4 AAA batteries (not included) or via the included Type-C charging cable. When using the Type-C cable, no battery current is consumed.
Image: The blood pressure monitor highlighting its two power supply options: 4 AAA batteries (not included) and a Type-C USB cable (included).
2.2 Cuff Connection
Connect the air tube from the cuff securely into the air jack located on the side of the main monitor unit.
Image: The main blood pressure monitor unit connected to the arm cuff via its air tube.
3. Operating Instructions
3.1 Applying the Cuff
- Ensure the cuff fits your arm circumference (8.7" to 16.5").
- Wrap the cuff around your bare upper left arm, ensuring the air tube is positioned on the inside of your arm and runs down your forearm.
- The bottom edge of the cuff should be approximately 2 fingers (0.8"-1.2" or 2-3 cm) above your elbow joint.
- Secure the cuff snugly but not too tightly. You should be able to insert two fingers between the cuff and your arm.
Image: A visual guide demonstrating the four steps to correctly measure blood pressure: wrapping the cuff, positioning it above the elbow, keeping it at heart level, and pressing start.
3.2 Taking a Measurement
- Sit in a comfortable position with your back supported and feet flat on the floor.
- Rest your arm on a table so the cuff is at the same level as your heart.
- Press the "Start/Stop" button. The cuff will automatically inflate and deflate, and the measurement will begin.
- Remain still and avoid talking during the measurement.
- Your blood pressure (systolic and diastolic) and pulse rate will be displayed on the screen once the measurement is complete.
Image: Close-up of the blood pressure monitor's display and control buttons, indicating systolic, diastolic, and pulse readings, along with WHO indicator bar and user/memory functions.
3.3 User Modes and Memory
The device supports two independent users. Each user can store up to 99 measurement sets.
- To switch between User 1 and User 2, press the user selection button (often indicated by two person icons) in standby mode.
- To view past readings, press the "MEM" button. Use the arrow buttons to navigate through stored data.
Image: The blood pressure monitor display showing separate memory records for User 1 and User 2, each capable of storing 120 readings.
4. Display Information
The large 4.3-inch backlit LCD provides clear readings. It also features a color-coded indicator based on WHO (World Health Organization) classification to quickly assess your blood pressure status:
- Green: Normal blood pressure.
- Yellow/Orange: Mildly elevated blood pressure.
- Red: High blood pressure.
Image: The blood pressure monitor's display changing colors (green, yellow, red) to visually indicate normal, mild high, and high blood pressure readings.
5. Specifications
| Model Number | AOJ-30C |
| Brand | Abesee |
| Product Dimensions | 10.67 x 13.72 x 6.1 cm; 520 g |
| Power Source | 4 AAA Batteries (not included) or Type-C USB Cable (included) |
| Display Type | LCD (4.3-inch backlit) |
| Cuff Circumference | 8.7" to 16.5" (22-42 cm) |
| Memory | 2 users, 99 sets each |
6. Maintenance
- Clean the monitor and cuff with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
- Store the device in the provided storage bag when not in use.
- Keep the monitor away from direct sunlight, extreme temperatures, and moisture.
- Remove batteries if the device will not be used for an extended period to prevent leakage.
7. Troubleshooting
- Inaccurate Readings: Ensure the cuff is correctly applied, your arm is relaxed and at heart level, and you remain still and silent during measurement.
- No Display/Power: Check if batteries are inserted correctly and have sufficient charge, or try powering the device with the Type-C cable.
- Cuff Not Inflating/Deflating: Verify that the air tube is securely connected to both the cuff and the main unit.
8. Warranty and Support
For warranty information or technical support, please refer to the contact details provided in your product packaging or reach out to Abesee customer service. Keep your purchase receipt for warranty claims.