Outsunny Outdoor Fountain with Birdhouse (Model 844-652V80BN) Instruction Manual

Introduction

Thank you for choosing the Outsunny Outdoor Fountain with Birdhouse. This 3-tier rustic tree trunk fountain is designed to enhance your outdoor space with its cascading water feature, integrated birdhouses, and LED lighting. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your new fountain.

Key Features:

Dual-Function Birdhouse Fountain: Features twin birdhouses and a cascading water design.
Illuminated Water Feature: Equipped with five LED lights in each basin for nighttime ambiance.
Rustic Outdoor Decor: Crafted to resemble natural logs with rope accents and a cardinal statue.
Weather-Resistant Design: Constructed from durable resin to withstand outdoor elements.

Setup

Carefully unpack all components and inspect for any damage. Ensure all parts are present before proceeding with assembly.

1. Placement

Select a level surface for your fountain to ensure stability and proper water flow. Position the fountain near a suitable power outlet and in an area that offers some shelter from strong winds to minimize water loss due to splashing.

Outsunny Outdoor Fountain with Birdhouse, full view

Image: Full view of the Outsunny Outdoor Fountain with Birdhouse, showcasing its design and size in an outdoor setting.

Image: Diagram illustrating the dimensions of the Outsunny Outdoor Fountain: 11" L x 10.6" W x 34.6" H (28 x 27 x 88 cm).

2. Assembly and Water Filling

Connect the pump to the tubing inside the fountain. Ensure a secure fit.
Place the pump into the designated reservoir at the bottom of the fountain.
Fill the fountain with distilled water until the pump is fully submerged. Do not overfill.
Plug the power cord into a grounded outdoor outlet.

Video: This video demonstrates the pump adjustment and water flow for an Outsunny outdoor fountain, providing visual guidance for initial setup and operation.

Operating Instructions

Once assembled and filled with water, your fountain is ready for operation.

1. Powering On/Off

To start the fountain, simply plug the power cord into a suitable electrical outlet. To turn it off, unplug the power cord.

2. Water Level Maintenance

Regularly check the water level. Due to evaporation and splashing, the water level will decrease over time. Refill with distilled water as needed to ensure the pump remains fully submerged. Operating the pump without sufficient water can cause damage.

Close-up of constant water flow in Outsunny fountain

Image: A close-up view of the Outsunny fountain demonstrating the constant water flow from one tier to another.

3. LED Lights

The fountain features integrated LED lights that illuminate the cascading water. These lights operate automatically when the fountain is powered on, creating a radiant focal point in your garden at night.

Outsunny Outdoor Fountain with illuminated water basins at night

Image: The Outsunny Outdoor Fountain at night, with its water basins beautifully illuminated by LED lights.

Maintenance

Proper maintenance will ensure the longevity and optimal performance of your fountain.

1. Regular Cleaning

Fountain Surface: Clean the exterior of the fountain periodically with a soft cloth and mild soap to remove dirt and debris. Rinse thoroughly.
Water Basins: To prevent algae and mineral buildup, drain the water and clean the basins every 1-2 weeks. Use a non-abrasive brush for stubborn deposits.
Pump: Disconnect the pump from power. Remove the pump from the fountain and disassemble it according to the pump's instructions (if provided). Clean the impeller and housing to remove any debris or mineral buildup.

Close-up of water inlet on Outsunny fountain

Image: A close-up view of the water inlet on the Outsunny fountain, showing the area where water flows into the basin, important for cleaning.

2. Water Changes

Completely change the water in the fountain every 2-4 weeks, or more frequently if the water appears cloudy or dirty. Always use distilled water to minimize mineral deposits.

3. Winterization

Before the first frost, drain all water from the fountain and pump. Clean all components thoroughly. Store the fountain and pump indoors in a dry, frost-free location to prevent damage from freezing temperatures.

Troubleshooting

If you encounter issues with your fountain, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
No water flow or weak flow	Low water level Pump clogged or dirty Kinked or blocked tubing Pump not powered	Add distilled water until pump is submerged. Clean the pump impeller and housing. Check and clear any obstructions in the tubing. Ensure power cord is securely plugged in.
Water leaking from fountain	Fountain not level Cracks in resin Overfilled water reservoir	Adjust fountain placement to a level surface. Inspect for damage; contact support if significant. Remove excess water.
LED lights not working	Power issue Loose connection	Check power outlet and connections. Ensure all light connections are secure.
Excessive splashing	Pump flow too high Fountain not level	Adjust pump flow rate if applicable (refer to pump instructions). Ensure fountain is on a level surface.

Specifications

Detailed specifications for the Outsunny Outdoor Fountain with Birdhouse:

Feature	Detail
Model Number	844-652V80BN
Colour	Brown
Material	Resin
Product Dimensions (L x W x H)	28L x 27W x 88H Centimetres (11" L x 10.6" W x 34.6" H)
Item Weight	19 Pounds
Power Source	Corded Electric
Special Features	3 Tiers, Corded, LED Lights, Tree Trunk Style, Weather Resistant
Cable Length	78.7" L (2 m)
Assembly Required	Yes

Warranty and Support

Warranty: This product comes with a 90 Day Warranty Against Manufacturer Defects.

Customer Support: For any questions, concerns, or warranty claims, please contact the manufacturer:

Manufacturer: Aosom Canada
Contact Information: Markham, Ontario, CA Tel. 1-416-792-6088

Outsunny 844-652V80BN