Introduction
Welcome to your new OBET B66-Air-1 Wireless Weather Station. This device provides accurate indoor and outdoor temperature and humidity readings, along with weather forecasts and atmospheric pressure. With three remote sensors, you can monitor conditions in multiple locations, enhancing your awareness of environmental changes in your home, garden, or other areas.
Package Contents
- Weather Station Main Unit (1)
- Wireless Remote Sensors (3)
- USB Power Cable (1)
- Operating Instructions (This Manual)
Product Overview
Main Display Unit
The main unit features a large, color LCD display showing indoor and up to three outdoor sensor readings, weather forecast, and air pressure.
The main display unit shows temperature, humidity, weather forecast, and pressure. Three compact remote sensors are included for multi-location monitoring.
This diagram highlights the weather, pressure, temperature/humidity, max/min record, trend, and 3-channel alerts features of the weather station.
Remote Sensors
Each remote sensor wirelessly transmits temperature and humidity data to the main unit. They are designed for versatile placement and are clearly labeled for easy identification (Sensor 1, 2, 3).
Setup Guide
1. Powering the Main Unit
The main unit can be powered by either a USB cable or 3 AA batteries (not included).
- USB Power: For continuous backlight, connect the provided USB cable to the main unit and a USB power adapter (not included).
- Battery Power: Insert 3 AA batteries into the battery compartment, observing polarity. The backlight will automatically turn off after 10 seconds to conserve energy.
2. Installing Batteries in Remote Sensors
Each remote sensor requires 2 AA batteries (not included). Open the battery compartment on the back of each sensor and insert the batteries, observing polarity.
The main unit can be powered via USB for continuous backlight or with 3 AA batteries. Each remote sensor requires 2 AA batteries.
3. Initial Synchronization
Once powered, the main unit will automatically search for and connect to the remote sensors. Ensure sensors are within range during initial setup. The corresponding sensor channel on the main unit's display will show readings once connected.
Operating Instructions
Display Overview
The color LCD display provides a clear overview of all monitored data, including indoor temperature and humidity, readings from up to three remote sensors, weather forecast, and atmospheric pressure.
This image points out key display elements such as sensor readings, indoor temperature/humidity, weather forecast, air pressure, and alert indicators.
Adjusting Backlight
The main unit features 3 adjustable backlight settings (High, Low, Off). Press the "Light" button on the top of the unit to cycle through the brightness levels. When powered by USB, the backlight can remain continuously on.
The display offers 100%, 50%, and 0% backlight options, adjustable via the light button. Continuous backlight is available when powered by USB.
Temperature and Humidity Alarms
You can set custom high and low temperature and humidity alerts for each channel (indoor and three outdoor sensors). When readings exceed or fall below your preset values, the unit will provide an audible and/or visual alert. Refer to the detailed instructions in the included manual for setting specific alarm thresholds.
The weather station supports 3-channel temperature and humidity alarms, useful for monitoring various environments like kitchens, incubators, greenhouses, and wineries.
Weather Forecast
The station predicts weather conditions for the next 12 hours based on atmospheric pressure changes. Icons for Sunny, Partly Cloudy, Overcast, Rain, and Thunderstorm are displayed. An ice alarm (snowflake icon) will flash if the temperature is between 33.8°F and 30.2°F, and remain steady if below 30.2°F for an extended period, indicating frost risk.
The weather station provides a 5-mode weather forecast for the next 12 hours, including indicators for sunny, partly cloudy, overcast, rain, and thunderstorm conditions.
Max/Min Records and Trend Indicators
The unit records maximum and minimum temperature and humidity values over a 24-hour period. Trend arrows indicate whether temperature and humidity are rising, falling, or remaining stable, providing insight into environmental changes.
This graphic shows how the weather station tracks and displays maximum and minimum temperature and humidity values over a 24-hour cycle, along with trend arrows.
Unit Selection (Fahrenheit/Celsius, inHg/hPa)
The temperature can be displayed in Fahrenheit (°F) or Celsius (°C). Atmospheric pressure can be displayed in inHg or hPa. Refer to the full manual for instructions on changing these units to your preferred setting.
Placement Guidelines
Main Unit Placement
Place the main unit indoors in a central location, away from direct sunlight, heat sources, or drafts that could affect its indoor readings. It can be placed on a flat surface using its durable stand or mounted on a wall using the hanging hole.
The main unit offers two installation methods: a hanging hole for wall mounting and a durable stand for tabletop placement.
Remote Sensor Placement
For optimal accuracy and signal transmission, place remote sensors vertically and avoid direct exposure to sunlight, rain, or snow. Keep them off the ground. The sensors have a wireless range of up to 500 feet (150 meters) from the main unit. Consider placing sensors in areas like a garden, garage, or other rooms to monitor specific conditions.
The three remote sensors allow monitoring of temperature and humidity in up to three distinct areas, such as outdoor environments, plant rooms, or other indoor spaces.
Maintenance
To ensure the longevity and accuracy of your weather station, follow these maintenance guidelines:
- Clean the display and sensor casings with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals.
- Replace batteries in the main unit and sensors promptly when the low battery indicator appears to ensure continuous and accurate operation.
- Ensure remote sensors are protected from extreme weather conditions if placed outdoors, as they are designed to be weather-resistant but not fully waterproof.
Troubleshooting
No Signal from Remote Sensor
- Check Batteries: Ensure batteries are correctly installed and not depleted in both the main unit and the sensor.
- Range: Move the sensor closer to the main unit to confirm it's within the 500ft wireless range. Obstacles like thick walls can reduce range.
- Interference: Avoid placing sensors near large metal objects or strong electronic devices that may cause wireless interference.
- Resynchronize: If issues persist, try removing and reinserting batteries in both the main unit and the problematic sensor to force a resynchronization.
Inaccurate Readings
- Sensor Placement: Ensure sensors are not in direct sunlight, near heat sources (e.g., vents, appliances), or exposed to rain/snow. Place them vertically in a shaded, well-ventilated area for outdoor readings.
- Calibration: While the sensors are designed for high accuracy, if you suspect a significant discrepancy, compare readings with a known accurate thermometer/hygrometer in the same location.
Specifications
| Feature | Detail |
|---|---|
| Brand | OBET |
| Model Number | B66-Air-1 |
| Display Type | Color Digital LCD |
| Indoor Temperature Range | 14.2°F to 122°F (-9.9°C to 50°C) |
| Outdoor Temperature Range | -58°F to 158°F (-50°C to 70°C) |
| Temperature Accuracy | +/-1.8°F (+/-1°C) |
| Humidity Range | 20% to 95% RH |
| Humidity Accuracy | +/-5% |
| Wireless Range | Up to 500 feet (150 meters) |
| Power Source (Main Unit) | USB Power Cable (adapter not included) or 3 x AA Batteries (not included) |
| Power Source (Sensors) | 2 x AA Batteries per sensor (not included) |
| Included Components | Weather thermometer, 3 Wireless sensors, Operating instructions, USB Cord |
| Special Features | 3-Channel Monitoring, Adjustable Backlight, 5-Mode Weather Forecast, Max/Min Records, Trend Indicators, Temperature/Humidity Alarms |
Warranty and Support
OBET products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official OBET website.
You can also visit the OBET Store on Amazon for additional product information and customer service.