Introduction
The Lvetek Multi Plug Outlet Surge Protector (Model QF-519C) is a versatile power solution designed to expand your wall outlet capabilities. It features 5 AC outlets, 4 USB charging ports (including 1 USB-C), an integrated night light, and provides surge protection for your connected devices. This manual provides essential information for safe and effective use of your new power strip.
Important Safety Information
- Indoor Use Only: This device is intended for indoor use only. Do not use in wet or damp conditions.
- Electrical Rating: Do not exceed the total electrical rating of 1875W (15A, 125V) to prevent damage to the unit and potential fire hazards.
- USB-C Compatibility: The USB-C port does not support devices requiring 14-22V charging voltage. Ensure your device is compatible.
- Ground-Fault Circuit-Interrupter (GFCI): To reduce the risk of electric shock, use only with standard duplex or decor outlets. Do not use this device with GFCI receptacles where openings do not align with the blades.
- Surge Protection: The unit features a 1680 Joule surge protector to safeguard your electronics.
- ETL Certified: This product is ETL certified, ensuring it meets recognized safety standards.
Product Features
Your Lvetek Multi Plug Outlet Surge Protector offers the following features:
- 5 AC Outlets: Strategically placed on three sides for convenient access and to accommodate larger adapters without blocking adjacent outlets.
- 4 USB Charging Ports: Includes 3 USB-A ports (5V/2.4A MAX) and 1 USB-C port (5V/3A MAX) for charging mobile devices. Total USB output is 4.2A.
- Smart Night Light: An integrated LED night light with a Dusk-To-Dawn sensor automatically illuminates when ambient light is insufficient. It also features a touch sensor for three levels of adjustable brightness and manual on/off control.
- Advanced Surge Protection: Equipped with a 2-level complementary Surge Protector Circuit (TVS, MOV) with a minimum 1680J energy absorbing capacity for enhanced device protection.
- Secure Installation: Designed to plug directly into a standard wall outlet and can be secured with a screw for stability.
Figure 1: Overview of Lvetek Multi Plug Outlet features including AC outlets, USB ports, surge protection, and night light.
Video 1: This video demonstrates the various features of the Lvetek Multi Plug Outlet, highlighting its design and functionality.
Setup and Installation
Follow these steps to install your Lvetek Multi Plug Outlet Surge Protector:
- Identify Compatible Outlet: Ensure you are using a standard duplex or decor wall outlet. This product is not suitable for USB receptacles or GFCI outlets where the plastic post on the back does not align.
- Remove Wall Plate Screw: Carefully remove the center screw from your existing wall outlet's faceplate.
- Plug In the Unit: Align the prongs of the Lvetek Multi Plug Outlet with the top receptacle of your wall outlet. The plastic stabilizing post on the back of the unit should fit into the bottom receptacle's ground hole.
- Secure the Unit: Use the provided screw to secure the unit to the wall outlet by screwing it into the center hole. This ensures a stable and flush fit against the wall.
Figure 2: Rear view and compatibility guide for wall outlets. Shows how the unit plugs into standard outlets and highlights incompatible types.
Figure 3: Proper installation of the Lvetek Multi Plug Outlet, showing a flush fit and required spacing for adjacent outlets.
Video 2: This video provides a detailed demonstration of how to install the Lvetek Multi Plug Outlet, including securing it to the wall.
Video 3: This video addresses whether the unit can be used without tools, demonstrating the ease of installation.
Operating Instructions
Once installed, your Lvetek Multi Plug Outlet is ready for use:
- Using AC Outlets: Plug your devices directly into any of the 5 AC outlets. The 3-sided design and wide spacing allow for multiple large adapters to be used simultaneously.
- Using USB Charging Ports: Connect your USB-powered devices to the 3 USB-A ports or the 1 USB-C port. The total output for all USB ports is 4.2A. Remember the USB-C port limitation mentioned in the safety section.
- Controlling the Night Light:
- Dusk-To-Dawn Sensor: The night light will automatically turn on when the room darkens and turn off when sufficient light is detected.
- Touch Sensor: Tap the touch sensor to cycle through three levels of brightness (1st, 2nd, 3rd) or to manually turn the night light on/off.
Figure 4: Night light functionality, showing adjustable brightness levels and the dusk-to-dawn sensor.
Video 4: This video showcases the Lvetek Multi Plug Outlet as a versatile wall charging station, demonstrating its various ports in use.
Maintenance
To ensure optimal performance and longevity of your Lvetek Multi Plug Outlet:
- Cleaning: Disconnect the unit from the wall outlet before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or aerosols.
- Inspection: Periodically inspect the unit for any signs of damage, such as frayed cords or loose connections. If damage is found, discontinue use and replace the unit.
- Replacement: Surge protectors have a limited lifespan. It is recommended to replace the unit after a few years of continuous use, especially if it has experienced multiple power surges, to ensure continued protection.
Troubleshooting
- No Power to Devices:
- Ensure the unit is securely plugged into the wall outlet and the wall outlet itself is functional.
- Check if the
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.