Introduction
This manual provides essential information for the safe and efficient use of your HTC True Wireless Earbuds 6. Please read it thoroughly before use to ensure optimal performance and longevity of your device.
The HTC True Wireless Earbuds 6 feature Bluetooth 5.3 for stable connectivity, intuitive touch controls, a built-in microphone for calls, and noise-cancelling capabilities for an immersive audio experience. Enjoy up to 22 hours of playtime with the included charging case, compatible with both Android and iOS devices.
Package Contents
Verify that all items are present in your package:
- 2 x HTC True Wireless Earbuds (Left and Right)
- 1 x Charging Case
- 1 x USB-C Charging Cable
- 2 Pairs x Rubber Eartips (S/L)
Image: HTC True Wireless Earbuds 6, showing both earbuds and the charging case.
Setup
1. Charging the Earbuds and Case
Before first use, fully charge the earbuds and the charging case. Place the earbuds into their respective slots in the charging case. Connect the charging case to a power source using the provided USB-C cable. The indicator light on the case will illuminate to show charging status and turn off when fully charged. A full charge typically takes a few hours.
2. Selecting Eartips
Choose the eartips that provide the most comfortable and secure fit for your ears. A proper seal is crucial for optimal sound quality and effective noise cancellation. Experiment with the different sizes (S/L) to find your best fit.
Image: A close-up of an earbud, illustrating the eartip and its fit.
3. Pairing with a Device
To pair your earbuds with a Bluetooth-enabled device:
- Ensure the earbuds are charged and placed inside the charging case.
- Open the lid of the charging case. The earbuds will automatically enter pairing mode, indicated by a flashing LED light.
- On your smartphone or tablet, go to the Bluetooth settings and enable Bluetooth.
- Select "HTC TWS6" from the list of available devices.
- Once connected, you will hear a voice prompt, and the LED light on the earbuds will stop flashing.
The earbuds utilize Bluetooth 5.3 technology for instant pairing and a stable connection, supporting HFP, HSP, A2DP, AVRCP, AVCTP, AVDTP, SPP, and SDP protocols.
Operating Instructions
Touch Controls
The HTC True Wireless Earbuds 6 feature smart touch controls for easy management of your audio and calls:
| Action | Control |
|---|---|
| Play Music | Tap left/right earbud once |
| Pause Music | Tap left/right earbud once |
| Answer Call | Tap left earbud once |
| Hang Up Call | Tap right earbud once |
| Reject Call | Tap and hold earbud for 2 seconds |
| Previous Track | Tap and hold left earbud for 2 seconds |
| Next Track | Tap and hold right earbud for 2 seconds |
| Volume Down | Tap left earbud twice |
| Volume Up | Tap right earbud twice |
| Activate Voice Assistant | Tap right earbud three times |
Image: Visual guide to the touch control functions on the earbuds.
Audio Features
Experience high-quality audio with immersive stereo sound. The earbuds deliver a powerful and wide sound range, ensuring dynamic treble and strong bass for all music genres. The noise-cancelling feature helps minimize ambient sound, allowing you to focus on your audio.
Image: Earbuds shown in use with a smartphone, illustrating stereo sound capability.
Maintenance
Cleaning
To maintain optimal performance and hygiene, regularly clean your earbuds and charging case. Use a soft, dry, lint-free cloth. For the eartips, they can be gently removed and cleaned with mild soap and water, then thoroughly dried before reattaching. Avoid using abrasive materials or harsh chemicals.
Water Resistance
The earbuds are designed with an IPX5 sweatproof rating, making them resistant to splashes and sweat. This makes them suitable for exercise and daily activities. However, they are not waterproof and should not be submerged in water or exposed to heavy rain.
Troubleshooting
Earbuds Not Pairing
- Ensure both earbuds and the charging case are sufficiently charged.
- Make sure Bluetooth is enabled on your device.
- Place the earbuds back into the charging case, close the lid, wait a few seconds, then open the lid again to re-enter pairing mode.
- If the issue persists, try "forgetting" or "unpairing" the earbuds from your device's Bluetooth settings and then attempt to pair them again.
No Sound from One Earbud
- Check the battery level of both earbuds.
- Place both earbuds back into the charging case, close the lid, and then take them out again. This often resets the connection.
- Ensure the earbuds are clean and free from debris that might obstruct the sound output.
Poor Sound Quality
- Verify that the eartips provide a snug and comfortable fit to create a proper seal in your ear canal.
- Ensure the earbuds are clean and free from earwax or other obstructions.
- Move closer to your connected device to avoid interference or signal loss.
Specifications
| Feature | Detail |
|---|---|
| Brand | HTC |
| Model Name | TWS6 |
| Model Number | HTC TWS6 |
| Connectivity Technology | Wireless (Bluetooth) |
| Bluetooth Version | 5.3 |
| Ear Placement | In Ear |
| Form Factor | In Ear |
| Control Method | Touch |
| Noise Control | Hybrid Noise Cancellation |
| Water Resistance Level | IPX5 (Sweat Resistant) |
| Battery Average Life | 5 Hours (earbuds) |
| Total Playtime with Case | Up to 22 Hours |
| Compatible Devices | Smartphones, Tablets (iOS, Android) |
| UPC | 768649987938 |
Image: Dimensions of the HTC True Wireless Earbuds 6 charging case.
Warranty and Support
Warranty Information
Your HTC True Wireless Earbuds 6 come with a 360-day warranty extension. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and malfunctions under normal use.
Customer Support
For any questions, technical assistance, or warranty support, please contact our customer service team. We offer 7x24 Live Chat Support to assist you with any inquiries you may have.
For further assistance, please visit the official HTC support website or refer to the contact information provided in your product packaging.
