Truey Titanium Alloy Silicone Ingrown Toenail Treatment Manual

Introduction

The Truey Titanium Alloy Silicone Ingrown Toenail Treatment is designed to provide effective correction for ingrown fingernails and toenails. This innovative product utilizes a memory-type titanium alloy silicone patch with high elasticity to generate an upward pulling force, gently correcting the nail's growth direction. It is suitable for individuals of all ages experiencing nail problems such as ingrowth, curling, or deformation, helping to alleviate discomfort and promote healthy nail growth.

The patches are cuttable to fit any nail size and are reusable. They are designed to be easily fixed to the nail surface with strong adhesion, allowing for normal daily activities such as exercise, bathing, and walking without interference. The kit includes all necessary tools and detailed instructions for a straightforward application process.

Safety Information

For external use only.

Please read all instructions carefully before use. If you are not skilled in application, or if you do not know where to consult customer service, seek professional guidance. Do not use on inflamed or bleeding nail grooves. Consult a professional doctor before use if you have circulatory disorders or diabetes. Observe for 2 hours after application; if you feel uncomfortable, adjust or remove it. Do not exercise vigorously within 24 hours of application. If glue accidentally smears on hands or other parts, do not be nervous; wipe with paper towels, apply thinner to the area, wait about 2 minutes, and gently scrub the glue with your hands.

Package Contents

The Truey Ingrown Toenail Treatment kit includes the following items:

• Titanium alloy silicone correction patches (available in three different sizes, cuttable)
• Nail glue
• Dispergator (glue remover)
• Alcohol pads (75% Ethyl Alcohol for disinfection)
• Quick stick strip (for patch application)
• Nail file
• Detailed instructions
• Nail clippers

Image: Complete and professional accessories of the Truey Ingrown Toenail Correction Kit, including patches, glue, dispergator, alcohol pads, quick stick strip, nail file, and instructions.

Operating Instructions

Follow these steps for effective application of the Truey Ingrown Toenail Treatment:

1. Prepare the Nail: Use the provided nail file to gently roughen the surface of the affected nail. This helps improve adhesion.
   

   Image: A hand using a nail file to roughen the surface of a toenail, preparing it for the correction patch.
2. Clean the Nail: Use an alcohol pad to thoroughly clean the nail surface. Ensure it is free from oils, dirt, and debris for optimal adhesion.
3. Prepare the Patch: Select a titanium alloy silicone correction patch. The patch can be cut to fit the specific size of your nail if needed.
   

   Image: A pair of scissors cutting the ingrown toenail correction patch to adjust its length for a perfect fit on the nail.

4. Apply Glue to Patch: Apply a thin layer of nail glue to the back (grid pattern side) of the correction patch.
   

   Image: A hand applying nail glue to the textured (grid pattern) side of the correction patch, indicating the side that adheres to the nail.

5. Position the Patch: Carefully place the patch onto the affected area of the nail using the quick stick strip for assistance. Press firmly for 15-20 seconds and then release slowly. Ensure the patch is centered and securely adhered.
6. Reinforce with Glue: Apply a small amount of nail glue around the edges of the applied patch to further reinforce its adhesion. Allow to dry completely (approximately 1 minute).
7. Video Demonstration: For a visual guide on the application process, including how to use the correction wire, please watch the following video:

   Video: This video demonstrates the process of ingrown toenail treatment, showing how to prepare the nail, apply the patch, and reinforce it with glue. It provides a clear visual guide for users.
8. Correction Wire Application (Advanced): If using the correction wire, follow these steps:
   1. Roughen and clean the nail surface as described in steps 1 and 2.
   2. Use tweezers to pick up a slot patch and apply a little glue on its back.
   3. Paste the slot patch on one side of the ingrown toenail. Wait for about 1 minute for the glue to dry.
   4. Repeat for the other side of the nail.
   5. Pick up a correction wire and check its length against the nail. If it exceeds the nail's width, use nail clippers to cut it to the appropriate size.
   6. Carefully insert one end of the wire into the slot of the first patch.
   7. Insert the other end of the wire into the slot of the second patch, ensuring it is securely in place.
   8. Apply some glue around the wire and patches to reinforce the entire setup. Wait for the glue to dry.

   Video: This video provides a detailed demonstration on how to use the correction wire kit to fit your nail, including preparation, application of slot patches, cutting the wire, and securing it for effective ingrown toenail correction.

9. Removal: If the ingrown nail has been repaired and you wish to remove the correction wire or patch, apply the dispergator (glue remover) onto the glued area. Wait a few minutes for the glue to dissolve, then carefully remove the wire and patch using tweezers.

Maintenance

The Truey Titanium Alloy Silicone Ingrown Toenail Treatment patches are designed for long-term use. They do not require regular replacement and can be used until the nails grow normally. The memory alloy material allows the patches to rebound tens of thousands of times and bend 180 degrees without deformation, ensuring continuous corrective force.

After application, the patches will not affect normal daily life. You can engage in activities such as exercise, bathing, or walking without concern.

Troubleshooting

• Patch not sticking: Ensure the nail surface is thoroughly roughened and cleaned with an alcohol pad before applying glue. If the nail is very curved and thick (onychomycosis), it may be harder to stick.
• Discomfort after application: Observe for 2 hours after application. If you feel uncomfortable, adjust the patch's position or remove it. Avoid vigorous exercise within 24 hours of application.
• Glue on skin: If glue accidentally smears on your hands or other parts, do not panic. Wipe with paper towels, apply the thinner (dispergator) to the area, wait about 2 minutes, and gently scrub the glue with your hands.
• Effectiveness: It is recommended to replace the patch once a month for continuous correction. The effect is often better after soaking feet.

Specifications

Warranty and Support

Truey stands behind its product with a commitment to customer satisfaction. If you experience any issues with your ingrown toenail treatment kit, our dedicated support team is ready to assist you promptly. Please refer to the product packaging or contact Truey customer service for further assistance.