Lulia Hands-Free Wearable Breast Pump User Manual

1. Introduction

Thank you for choosing the Lulia Hands-Free Wearable Breast Pump. This device is designed to provide a comfortable and efficient breast pumping experience, allowing for discreet use at home, in the office, or while traveling. Please read this manual thoroughly before first use to ensure proper operation, maintenance, and safety.

Image: The Lulia Hands-Free Wearable Breast Pump, showing two pump units and included accessories such as milk storage bags, flange inserts, charging cables, and a storage pouch.

2. Important Safety Information

Always follow basic safety precautions when using electrical products, especially when children are present. Failure to do so may result in electric shock, burns, fire, or injury.

• Do not immerse the motor unit in water or other liquids.
• Keep the device away from heat sources and direct sunlight.
• Ensure all parts are correctly assembled before use to prevent milk leakage and maintain suction.
• This product is intended for personal use. Do not share with others.
• Inspect all components for damage before each use. Discontinue use if any part is damaged.
• Use only the provided charging cable and adapter.
• Keep out of reach of children.

3. Package Contents

Verify that all items listed below are included in your package:

Image: A visual representation of all components included in the Lulia Hands-Free Wearable Breast Pump package.

• 2 x Motor Units
• 2 x Breast Shields
• 2 x Milk Collectors (180ml / 6oz capacity)
• 2 x Type-C Charging Cables
• 1 x Flange Size Ruler
• 1 x Storage Bag
• 2 x Tee Fittings
• 2 x Diaphragms
• 6 x Flange Inserts (17mm, 19mm, 21mm - two of each)
• 2 x Valves
• 1 x Quick Start Guide
• 1 x User Manual
• 10 x Milk Storage Bags
• 2 x Bra Adjusters

4. Setup and Assembly

4.1 Charging the Device

Before first use, fully charge the breast pump motor unit. Connect the Type-C charging cable to the motor unit and a suitable USB power adapter. The LED display will indicate charging status. A full charge provides approximately 180 minutes (5-6 sessions) of use.

4.2 Selecting the Correct Flange Size

Choosing the correct flange size is crucial for comfort and milk expression efficiency. Use the included measurement card to determine your nipple size. The Lulia pump includes flange inserts in 17mm, 19mm, 21mm, and 24mm (built-in) sizes.

Image: Instructions on how to measure nipple diameter and a chart correlating nipple size to recommended flange size for optimal fit.

4.3 Assembling the Breast Pump

Follow these steps to assemble the breast pump components:

Image: A five-step visual guide demonstrating the assembly process of the breast pump, from inserting the duckbill valve to attaching the motor unit.

1. Insert the suction bowl and duckbill valve into the bottom of the tee fitting, ensuring it is fully seated.
2. Attach the tee fitting to the flange. Ensure the tee fitting and flange are aligned according to the markings and push them in securely.
3. Align the flange with the milk bowl, ensuring the milk outlet is centered. Firmly press the center of the flange to create a strong seal.
4. Press the edge of the flanges until they are tightly sealed.
5. Assemble the pump motor to the milk collector.

5. Operating Instructions

5.1 Wearing the Breast Pump

For hands-free operation, correctly position the pump within your bra.

Image: A three-step visual guide on how to properly place the breast pump against the breast and secure it within a bra for effective pumping.

1. Place the nipple in the center of the silicone shield.
2. Press the silicone shield firmly against the breast, ensuring no gaps for air leakage.
3. Wear your bra after fixing the breast pump in place. Keep your body upright during pumping.

5.2 Powering On and Mode Selection

Press the power button to turn on the pump. The smart LED display will show the current mode, suction level, and pumping time. The pump features 4 modes and 9 suction levels:

Image: A graphic detailing the four distinct pumping modes (Massage, Comfort, Suction, Mixed) and their functions, alongside a visual of the pump in use.

• Massage Mode: Gentle stimulation to initiate milk flow.
• Comfort Mode: Designed for comfortable pumping and effective breast emptying.
• Suction Mode: Strong and deep suction for efficient milk removal.
• Mixed Mode: Combines different rhythms to promote milk expression in a shorter time.

Use the '+' and '-' buttons to adjust the suction intensity within each mode. The pump has a memory function that automatically saves your last used settings for convenience. It also features intelligent timing, recording pumping duration, and will automatically turn off after 30 minutes of continuous operation.

5.3 Pouring Out Breast Milk

After pumping, carefully remove the pump and transfer the milk.

Image: A three-step visual guide demonstrating how to safely detach the motor and pour expressed milk from the collector into a bottle or storage bag.

1. Take off the breast pump and keep the pump upright to prevent spills.
2. Carefully detach the motor unit from the milk collector.
3. Hold the milk collector and pour the expressed milk into a sterile bottle or milk storage bag.

6. Maintenance and Cleaning

Proper cleaning and sterilization are essential for hygiene and product longevity. All components that come into contact with breast milk are made of food-grade silicone and are BPA-free.

Image: An exploded diagram showing the five main parts of the Lulia Breast Pump that require cleaning, emphasizing that the main motor body should not be washed.

6.1 Disassembly for Cleaning

Disassemble all parts that come into contact with breast milk (breast shield, milk collector, tee fitting, diaphragm, valves, flange inserts). The main motor unit should not be washed.

6.2 Cleaning Instructions

• Rinse all disassembled parts immediately after use with cold water to remove milk residue.
• Wash parts in warm, soapy water using a mild dish soap. Use a soft brush for thorough cleaning.
• Rinse thoroughly with clean water.
• Air dry on a clean drying rack or use a clean cloth. Ensure all parts are completely dry before reassembly to prevent mold growth.

6.3 Sterilization

Sterilize all milk-contacting parts regularly. This can be done by:

• Boiling: Place parts in boiling water for 3-5 minutes.
• Steam Sterilizer: Use a microwave or electric steam sterilizer according to its instructions.
• UV Sterilizer: Follow the manufacturer's guidelines for UV sterilization.

Do not sterilize the motor unit.

7. Troubleshooting

8. Product Specifications

• Model Number: 1203
• Material: Food-grade Silicone, BPA-Free
• Suction Power: Up to 300 mmHg (Hospital-grade)
• Modes: 4 (Massage, Comfort, Suction, Mixed)
• Suction Levels: 9 per mode
• Milk Collector Capacity: 180ml / 6oz
• Noise Level: <50dB
• Battery: Rechargeable (LR44 batteries included)
• Battery Life: Approximately 180 minutes (5-6 sessions) on a full charge
• Automatic Shut-off: 30 minutes
• Flange Sizes Included: 17mm, 19mm, 21mm, 24mm (built-in)
• Dimensions (per unit): 13.5 x 8.27 x 4.29 inches
• Weight (per unit): 0.64 lbs

9. Warranty and Support

Lulia products are manufactured with quality and care. For information regarding warranty coverage or technical support, please refer to the contact details provided with your purchase or visit the official Lulia website. Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.