GREENER RM

GREENER Electric Pressure Washer 4500 PSI User Manual

Model: RM

Brand: GREENER

Introduction

Welcome to the GREENER Electric Pressure Washer user manual. This guide provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new pressure washer. Please read this manual thoroughly before first use and keep it for future reference.

GREENER Electric Pressure Washer with all accessories

The GREENER Electric Pressure Washer, featuring a compact design, comes with a spray gun, four quick-connect nozzles, a foam cannon, and hoses for comprehensive cleaning tasks.

Important Safety Information

Always wear appropriate personal protective equipment (PPE) including eye protection and gloves when operating the pressure washer.

Ensure the power cord and electrical outlet are in good condition and suitable for outdoor use.

Never point the spray gun at people, pets, or electrical outlets.

Disconnect the power supply before performing any maintenance or cleaning.

Safety lock feature on pressure washer spray gun

The spray gun features a safety lock mechanism to prevent accidental discharge, ensuring user safety during operation and storage.

Setup Guide

Follow these steps to set up your GREENER Electric Pressure Washer:

  1. Unpack Components: Carefully remove all parts from the packaging. Verify all components listed in the packing list are present.
  2. Attach High-Pressure Hose: Connect the high-pressure hose to the pressure washer's outlet and to the spray gun. Ensure connections are secure.
  3. Connect Water Supply: Connect a garden hose (not included) to the water inlet of the pressure washer. Ensure the water supply is clean and free of debris. The unit supports both faucet and self-priming (bucket) water sources.
Diagram showing two ways to connect water to the pressure washer: faucet and self-priming from a bucket.

The pressure washer offers versatile water intake options, allowing connection to a standard faucet or drawing water directly from a bucket for self-priming.

  1. Connect Power Cord: Plug the 16ft power cord into a grounded electrical outlet.
  2. Prepare Spray Gun: Before attaching a nozzle, pull the trigger on the spray gun to exhaust any air from the system until a steady stream of water emerges.
  3. Select Nozzle: Choose the appropriate quick-connect nozzle for your cleaning task (0°, 15°, 25°, 40°). Insert the selected nozzle into the spray gun until it clicks securely into place.
Illustration of four quick-connect nozzles and their spray patterns.

The pressure washer includes four quick-connect nozzles: 0° (red) for powerful blasting, 15° (yellow) for heavy-duty power, 25° (green) for general cleaning, and 40° (white) for gentle spraying.

  1. Add Detergent (Optional): If using the foam cannon, fill the dedicated detergent bottle with appropriate pressure washer detergent. Attach the foam cannon to the spray gun.
Man using the pressure washer with a foam cannon to apply soap to a car.

The included foam cannon allows for easy application of detergent, creating a thick foam for effective cleaning of vehicles and other surfaces.

Your pressure washer is now ready for operation.

Operating Your Pressure Washer

Starting the Unit:

  • Ensure the water supply is turned on.
  • Turn the power switch to the "ON" position. The pump will run for a few seconds to build pressure and then shut off. This is normal.
  • Squeeze the trigger on the spray gun to begin spraying. The pump will activate automatically when the trigger is engaged.

Nozzle Selection and Application:

Nozzle ColorSpray AngleRecommended Use
RedFor cracks and caked stains (e.g., concrete, metal). Use with extreme caution due to high pressure.
Yellow15°For driveways, concrete, and siding. Provides a focused wash for tough dirt.
Green25°For general cleaning of decks, cars, and fences. Offers a wider spray for broader coverage.
White40°For windows and outdoor furniture. Provides a uniform, gentle spray.
Close-up of the 0-degree red nozzle spray pattern on a dirty surface.

The 0° nozzle delivers a powerful, concentrated stream for removing stubborn dirt and grime from hard surfaces like concrete and metal.

Close-up of the 15-degree yellow nozzle spray pattern on a driveway.

The 15° nozzle provides a focused spray, ideal for cleaning driveways, concrete, and siding, effectively tackling tough dirt.

Close-up of the 25-degree green nozzle spray pattern on a wooden deck.

The 25° nozzle offers a wider spray for general cleaning tasks such as washing decks, cars, and fences.

Close-up of the 40-degree white nozzle spray pattern on a window.

The 40° nozzle provides a gentle, uniform spray, suitable for cleaning delicate surfaces like windows and outdoor furniture.

Total Stop System (TSS): The pump automatically stops when the trigger is not engaged, conserving energy and extending the life of the pump and motor.

Diagram illustrating the Total Stop System (TSS) feature.

The Total Stop System (TSS) automatically shuts off the pump when the spray gun trigger is released, saving energy and prolonging the unit's lifespan.

Maintenance and Storage

Proper maintenance ensures the longevity and optimal performance of your pressure washer.

After Each Use:

  • Flush System: Disconnect the power and water supply. Run the pressure washer for a few seconds to release any remaining pressure and water from the system.
  • Clean Nozzles: Remove nozzles and rinse them with clean water. Use the included nozzle cleaning tool to clear any blockages.
  • Drain Detergent Tank: If used, empty and rinse the detergent tank thoroughly.
  • Wipe Down Unit: Clean the exterior of the pressure washer with a damp cloth.

Storage:

  • Store the pressure washer in a dry, frost-free area.
  • Coil the high-pressure hose and power cord neatly.
  • Secure the spray gun and nozzles in their designated holders on the unit.
Diagram showing integrated storage features on the pressure washer for power cord, hose, and accessories.

The pressure washer features convenient integrated storage for the power cord, high-pressure hose, spray gun, and nozzles, promoting a clutter-free storage solution.

Troubleshooting Guide

If you encounter issues with your pressure washer, refer to the table below for common problems and solutions.

ProblemPossible CauseSolution
No water coming outWater supply off or restrictedCheck water tap, ensure hose is not kinked.
Low pressureClogged nozzleClean or replace nozzle.
Low pressureAir in pumpBleed air from pump by running unit with trigger open and no nozzle attached until steady water flow.
Motor stops frequentlyOverheating or low voltageAllow unit to cool. Check power supply for adequate voltage.
Unit does not startPower cord not plugged in or faulty outletCheck power connection and try a different outlet.

For issues not listed here, please contact customer service.

Product Specifications

FeatureDetail
BrandGREENER
ModelRM
Maximum Pressure4500 PSI
Maximum Flow Rate2.4 GPM
Power SourceAC Electric
Hose Length23 Feet
Power Cord Length16 Feet
Product Dimensions11"L x 9"W x 25"H
Item Weight14.47 pounds
UPC717018038474

Warranty and Customer Support

GREENER provides a warranty on every pressure washer sold, covering defects not caused by improper use.

For any questions during use or to claim warranty service, please reach out to our customer service for assistance. Trust GREENER's commitment to quality and your satisfaction.

Visit the official GREENER Store for more information: GREENER Store

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.