Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your new Generic 22-inch FHD 1080p 100Hz LED Bezel-Less Monitor. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage.
The monitor features a 22-inch (55.9 cm) Full High-Definition (1920 x 1080p) display with a 100Hz refresh rate, designed for clear visuals and smooth performance. Its bezel-less design offers an expansive viewing experience. Connectivity options include HDMI and VGA.
Package Contents
Verify that all items listed below are included in your package:
- 1 x Generic 22-inch FHD 1080p 100Hz LED Bezel-Less Monitor
- 1 x Power Adapter
- 1 x HDMI Cable
- 1 x Monitor Stand (Base and Neck)
- 1 x User Manual (this document)
Product Overview
Familiarize yourself with the components and features of your monitor.
Figure 1: Front View of the Monitor. This image shows the front of the 22-inch bezel-less monitor, featuring a wide screen displaying a complex data dashboard with charts and figures. The monitor is mounted on its square base.
Figure 2: Rear View and Connectivity Ports. This image displays the back of the monitor, highlighting the various input ports. Visible ports include HDMI, VGA, and the power input. The VESA mount points are also visible.
Figure 3: Side Profile of the Monitor. This image shows the slim side profile of the 22-inch monitor, emphasizing its thin design and the connection point for the stand.
Setup Instructions
1. Assembling the Stand
- Carefully remove the monitor and stand components from the packaging.
- Attach the stand neck to the monitor panel by aligning the tabs and gently pushing until it clicks into place. Ensure it is securely fastened.
- Attach the stand base to the stand neck. Tighten the captive screw at the bottom of the base by hand or with a coin until the base is firm.
- Place the assembled monitor on a stable, flat surface.
2. Connecting to a Computer
Your monitor supports both HDMI and VGA connections.
- HDMI Connection: Connect one end of the provided HDMI cable to the HDMI port on the monitor and the other end to the HDMI output port on your computer.
- VGA Connection: Connect a VGA cable (not included) to the VGA port on the monitor and the other end to the VGA output port on your computer.
3. Power Connection
- Connect the power adapter cable to the DC IN port on the monitor.
- Plug the power adapter into a wall outlet.
4. Initial Power On
Press the power button located on the monitor (refer to Figure 2 for location). The power indicator light will illuminate, and the monitor will display an image from your connected computer.
Operating Instructions
On-Screen Display (OSD) Menu
The OSD menu allows you to adjust various monitor settings. Use the control buttons (usually located on the back or bottom right of the monitor) to navigate and select options.
Common OSD Settings:
- Brightness/Contrast: Adjust the overall luminance and contrast of the display.
- Color Settings: Modify color temperature, RGB levels, or select preset color modes.
- Input Select: Manually switch between HDMI and VGA input sources.
- Picture Mode: Choose from various display modes optimized for different content (e.g., Standard, Game, Movie, Text).
- Low Blue Light: Enable or disable the low blue light feature to reduce eye strain.
- Aspect Ratio: Adjust the display aspect ratio (e.g., Full, 4:3).
- OSD Settings: Configure OSD language, transparency, and timeout.
- Reset: Restore all OSD settings to factory defaults.
Adjusting the Monitor Tilt
The monitor stand allows for tilt adjustment. Gently hold the top and bottom edges of the monitor panel and tilt it forward or backward to achieve your desired viewing angle. The tilt range is approximately -5° to +20°.
Maintenance
Cleaning the Monitor
- Always unplug the monitor from the power outlet before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a non-abrasive screen cleaner.
- Do not spray cleaner directly onto the screen. Apply it to the cloth first.
- Avoid using benzene, thinner, ammonia-based cleaners, or abrasive cleaners, as these can damage the screen or casing.
- Wipe the screen gently to remove dust or smudges. For the casing, use a dry, soft cloth.
Storage
If storing the monitor for an extended period, disconnect all cables and store it in a cool, dry place, preferably in its original packaging to protect it from dust and physical damage.
Troubleshooting
This section addresses common issues you might encounter with your monitor. If the problem persists after trying these solutions, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on screen |
|
|
| Image is blurry or distorted |
|
|
| Screen flickers |
|
|
| No sound (if applicable) |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | 100140681 |
| Screen Size | 22 inches (55.9 cm) / 21.45 inches (54.5 cm actual diagonal) |
| Display Type | LED Backlit LCD, VA Panel |
| Resolution | FHD 1920 x 1080 pixels |
| Refresh Rate | 100 Hz |
| Response Time | 4 ms |
| Static Contrast Ratio | 3000:1 |
| Aspect Ratio | 1.27:1 |
| Connectivity | 1 x HDMI, 1 x VGA |
| Adjustable Stand | Tilt (-5°/+20°) |
| VESA Compatibility | 75 x 75 mm |
| Product Dimensions (W x D x H) | 19.36 x 7.87 x 14.66 inches |
| Assembled Weight | 5.29 lbs |
| Operating System Compatibility | Windows and Mac compatible |
Warranty and Support
For warranty information or technical support, please refer to the warranty card included with your product or visit the manufacturer's official website. Keep your purchase receipt as proof of purchase for warranty claims.
Manufacturer: Generic
ASIN: B0DPNPGLS8
Date First Available: December 5, 2024
For further assistance, you may contact the seller, Sputnik Industries, through the Amazon platform.
