1. Product Overview
The EVELOR A19 LED Light Bulbs are energy-efficient lighting solutions designed to replace traditional incandescent bulbs. These 9W LED bulbs provide 800 lumens of bright Daylight 5000K light, equivalent to a 60-watt incandescent bulb, while saving up to 90% on energy consumption. They feature a standard E26 base for easy installation and are built for long-lasting performance.
Image 1.1: EVELOR A19 LED Light Bulbs (4-pack)
Key Features:
- Energy Efficiency: 9W power consumption, equivalent to 60W incandescent, saving up to 90% energy.
- High Brightness: Delivers 800 lumens with a Daylight 5000K color temperature for clear, natural light.
- High Color Rendering Index (CRI): CRI 80+ ensures colors appear rich, true, and natural.
- Non-Dimmable: Provides a consistent level of illumination, ideal for areas requiring steady light.
- Long Lifespan: Rated for 15,000+ hours, reducing the need for frequent replacements.
- Flicker-Free: Designed for stable and comfortable light output, protecting your eyes.
- Easy Installation: Features a standard E26 Medium base for simple screw-in setup.
2. Safety Information
Please read and understand all safety instructions before installing or using the light bulbs. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Power Off: Always turn off the power to the fixture and allow the old bulb to cool before replacing.
- Indoor Use: These bulbs are primarily designed for indoor use. While suitable for some outdoor covered fixtures, ensure they are protected from direct water exposure.
- Non-Dimmable: These bulbs are NOT DIMMABLE. Do not use them with dimmer switches, as this may cause damage to the bulb or the dimmer, and can lead to flickering or premature failure.
- Correct Base: Ensure the bulb base (E26) matches your lighting fixture's socket type.
- Handle with Care: Although shatter-resistant, handle bulbs carefully to avoid damage.
Image 2.1: Non-Dimmable Warning
3. Setup and Installation
Installing your EVELOR A19 LED Light Bulb is a simple process. Follow these steps for safe and proper installation:
- Turn Off Power: Before beginning, ensure the power to the light fixture is turned off at the circuit breaker or wall switch.
- Remove Old Bulb: Carefully unscrew the existing light bulb from the fixture. Allow it to cool if it has been recently in use.
- Insert New Bulb: Gently screw the EVELOR A19 LED Light Bulb into the E26 medium base socket until it is snug. Do not overtighten.
- Restore Power: Turn the power back on at the circuit breaker or wall switch.
- Test: Flip the light switch to ensure the new bulb illuminates properly.
Image 3.1: Bulb Installation
Video 3.1: A practical demonstration of installing and using the A19 LED bulb, highlighting its ease of replacement and cool-to-touch feature.
4. Operation
Operating your EVELOR A19 LED Light Bulb is straightforward. Once installed, simply use the standard wall switch connected to your fixture to turn the light on or off.
- Instant On: The bulb provides instant full brightness with no warm-up time.
- Consistent Light: As a non-dimmable bulb, it will maintain a steady 800 lumens of Daylight 5000K light whenever powered on.
Image 4.1: Example of Daylight 5000K illumination in a living space.
5. Maintenance
EVELOR A19 LED Light Bulbs are designed for minimal maintenance due to their long lifespan and durable construction.
- Cleaning: Ensure the bulb is cool and the power is off before cleaning. Wipe with a soft, dry cloth. Do not use liquid cleaners.
- Longevity: With an average lifespan of 15,000+ hours (approximately 7 years based on 3 hours/day usage), these bulbs require infrequent replacement.
- Flicker-Free Performance: The advanced design minimizes flicker and noise, providing a comfortable visual experience and protecting eye health.
Image 5.1: Flicker-Free Technology
6. Troubleshooting
If you encounter issues with your EVELOR A19 LED Light Bulb, please refer to the following common troubleshooting steps:
- Bulb Not Lighting:
- Ensure the power switch is on.
- Check if the bulb is screwed in securely into the socket.
- Verify that the fixture is receiving power (test with another working bulb if possible).
- Confirm the bulb base (E26) matches the fixture's socket.
- Flickering or Dimming:
- These bulbs are non-dimmable. Ensure they are not connected to a dimmer switch. Replace the dimmer with a standard on/off switch if necessary.
- Check for loose connections in the fixture or wiring.
- Unusual Noise:
- Ensure the bulb is not connected to a dimmer switch.
- Verify the voltage supply is within the specified range (110-130VAC).
If problems persist after following these steps, please contact customer support.
7. Specifications
Detailed technical specifications for the EVELOR A19 LED Light Bulb:
Image 7.1: Key Product Specifications
| Specification | Value |
|---|---|
| Brand | evelor |
| Model Name | A19-9W-5000K |
| Light Type | LED |
| Wattage | 9 Watts |
| Incandescent Equivalent Wattage | 60 Watts |
| Brightness | 800 Lumens |
| Color Temperature | 5000 Kelvin (Daylight) |
| Bulb Shape Size | A19 |
| Bulb Base | E26 Medium |
| Voltage | 110 - 130VAC |
| Frequency | 60 Hertz |
| Color Rendering Index (CRI) | 80+ |
| Lifespan | 15,000+ Hours (Approx. 7 Years) |
| Material | Plastic |
| Product Dimensions | 2.36"W x 4.45"H |
| Item Weight | 4.2 ounces |
| UPC | 717701940688 |
8. Warranty and Support
EVELOR is committed to providing high-quality lighting products. While specific warranty details are not provided in this manual, we stand behind the quality and performance of our A19 LED Light Bulbs.
For any questions, concerns, or technical assistance regarding your EVELOR product, please contact our customer support team. Refer to your purchase documentation or the official EVELOR website for contact information.
We recommend keeping your proof of purchase for any warranty claims.