Introduction
This manual provides essential information for the safe and effective operation of your BONTANNY BO-300 Red Light Therapy Device. Please read it thoroughly before use and retain it for future reference.
Image: BONTANNY BO-300 Red Light Therapy Device, showcasing its sleek design and LED panel.
Safety Information
For your safety and to ensure proper device function, observe the following precautions:
- Eye Protection: Always place the provided eye protection over your eyes before powering on the device.
- Placement: Ensure the device is placed on a stable, flat surface or securely mounted according to instructions.
- Power Source: Use only the provided 1.8m power cord and connect to a compatible 12V (DC) power outlet.
- Ventilation: Do not obstruct the cooling fans or ventilation openings on the device.
- Water Exposure: Keep the device away from water or damp environments.
- Children and Pets: Keep out of reach of children and pets.
- Medical Advice: Consult a healthcare professional before using this device if you have any medical conditions, are pregnant, or are taking medications.
Package Contents
Verify that all items are present in the package:
- BONTANNY BO-300 Red Light Therapy Device
- User Manual
- 1.8m Power Cord
- Remote Control (23A 12V battery not included)
- Eye Protection Goggles
- Adjustable Stand (pre-attached)
- Suspension Kit (for hanging)
- Door Hook
- Footpads
Image: All accessories included with the BONTANNY BO-300 device, such as the user manual, power cord, remote control, eye protection, and mounting hardware.
Setup
- Unpack: Carefully remove all components from the packaging.
- Positioning:
- Desktop Use: Extend the adjustable stand on the back of the device to position it on a flat surface.
- Hanging Use: Attach the suspension kit and door hook to the device and a suitable door or wall, ensuring it is securely fastened.
- Power Connection: Connect the 1.8m power cord to the device's power input and then plug it into a standard electrical outlet.
- Remote Control Battery: Insert a 23A 12V battery (not included) into the remote control.
Operating Instructions
The BONTANNY BO-300 offers flexible control via its intelligent operation panel or the remote control.
- Power On: Flip the main power switch on the device to the 'ON' position. The digital display will illuminate.
- Select Mode: Use the 'RED' button to activate Red Light (630nm & 660nm), the 'NIR' button for Near-Infrared Light (810nm, 830nm & 850nm), or activate both simultaneously.
- Set Timer: Use the '+' and '-' buttons on the control panel or remote to adjust the treatment time from 1 to 30 minutes. The device features an auto shut-off function.
- Start Treatment: Once the mode and timer are set, the device will begin emitting light.
- Power Off: To end a session early or after the timer completes, flip the main power switch to 'OFF'.
Image: Close-up of the device's control panel and remote control, highlighting the mode selection and timer functions.
Official Product Videos:
Video: BONTANNY Red Light Therapy - A seller demonstration of the device's features and operation.
Video: Finally a red light therapy panel that comes with a remote control - A seller highlights the convenience of the remote control.
Wavelengths and Modes
The BO-300 device utilizes 5 scientifically proven wavelengths for comprehensive therapeutic effects:
- Red Light (630nm & 660nm): Primarily targets skin health, promoting collagen production and reducing fine lines.
- Near-Infrared Light (810nm, 830nm & 850nm): Penetrates deeper into tissues, supporting muscle recovery, pain relief, and cellular repair.
Each LED features a 60-degree beam angle for even and widespread penetration.
Image: Visual representation of the 5 distinct wavelengths (630nm, 660nm, 810nm, 830nm, 850nm) and their varying penetration depths into skin layers.
Usage Guidelines
For optimal results, follow these guidelines:
- Session Duration: Typically 15-20 minutes per session. Do not exceed 30 minutes.
- Distance: Position the device approximately 6 inches (15 cm) from the target area for maximum irradiance (131mW/cm²).
- Frequency: Use 4-5 times per week for consistent benefits.
- Coverage Area: The BO-300 provides a 14x12-inch coverage area at 6 inches, suitable for various body parts.
Image: Chart illustrating the irradiance levels and coverage areas at various distances (3, 6, 12, 18 inches) from the device.
Official Product Videos:
Video: Using 5 Wavelength Red Light & NIR for a Skin Glow Up - A seller demonstrates the device's application for skin health.
Video: Watch what this red light Therapy lamp can do - A seller showcases the device's benefits for skin and anti-aging.
Maintenance
- Cleaning: Ensure the device is unplugged before cleaning. Use a soft, dry cloth to wipe the surface. Do not use liquid cleaners or abrasive materials.
- Storage: Store the device in a cool, dry place away from direct sunlight when not in use.
- Inspection: Regularly inspect the power cord for any damage. Do not use if the cord is frayed or damaged.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Power cord not connected properly or no power from outlet. | Check power cord connection. Test outlet with another device. |
| Lights are dim or flickering. | Power supply issue or device malfunction. | Ensure stable power supply. If problem persists, contact customer support. |
| Remote control not working. | Battery is dead or not inserted correctly. | Replace 23A 12V battery. Ensure correct polarity. |
Specifications
- Model Number: BO-300
- Product Dimensions: 8.7 x 2.4 x 13.2 inches
- Item Weight: 7.9 Pounds
- Number of Light Sources: 60 Dual-Chip LEDs
- Wavelengths: 630nm, 660nm (Red Light); 810nm, 830nm, 850nm (Near-Infrared Light)
- Irradiance: 131mW/cm² at 6 inches
- Beam Angle: 60 degrees
- Voltage: 12 Volts (DC)
- Timer: 1-30 minutes with auto shut-off
- Control: On-device panel and remote control
- Cooling: Integrated cooling fans
Image: Visual representation of the device's dimensions, weight, LED count, and number of wavelengths.
Warranty and Support
BONTANNY offers a 3-year promise for the BO-300 device, ensuring quality and durability. For any questions, concerns, or technical support, please contact BONTANNY customer service. Refer to the product packaging or official website for contact details.
A 30-day testing period is provided for peace of mind.
Important Notes
Legal Disclaimer: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.