MAHANCRIS Bar Stools Instruction Manual

1. Product Overview

The MAHANCRIS BABK0801 Bar Stools are a set of two counter-height saddle stools designed with an industrial aesthetic. They are suitable for various settings including dining rooms, kitchen counters, and home bars. Each stool features a wide, arc-shaped seat for comfort and multiple footrest heights for ergonomic support.

Image: A pair of MAHANCRIS BABK0801 bar stools, showcasing their black finish and industrial design.

2. Safety Information

• Ensure all screws and bolts are tightened securely before use.
• Do not exceed the maximum weight capacity of 220 lbs (100 kg) per stool.
• Keep children away from assembly area during setup.
• Avoid standing on the stools.
• Periodically check all connections for tightness to prevent loosening.
• Do not expose stools to excessive moisture or direct sunlight for prolonged periods.

3. Parts List

Please verify that all components are present before beginning assembly.

4. Setup and Assembly Instructions

Follow these steps carefully to assemble your MAHANCRIS Bar Stools.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Identify all parts using the provided parts list.
2. Attach Side Crossbars: Take two Front/Back Leg Frames (B). Attach two Side Crossbars (C) between them using Screws (G). Do not fully tighten the screws yet. Repeat for the second stool.
3. Install Footrest Bars: Insert the Long Footrest Bar (D) and Short Footrest Bar (E) into the designated slots on the assembled leg frames. Ensure the footrests are at the desired height (two height options are available). Secure with Screws (F). Do not fully tighten. Repeat for the second stool.
   

   Image: Illustration of the footrest design, showing two possible heights for user comfort.
4. Attach Saddle Seat: Place the Saddle Seat (A) onto the top of the assembled leg frame. Align the pre-drilled holes on the seat with the holes on the leg frames. Secure the seat to the frame using Screws (F).
5. Final Tightening: Once all components are loosely assembled, place the stool on a flat surface. Apply gentle downward pressure to ensure it sits evenly, then systematically tighten all screws using the Allen Wrench (H). Ensure all connections are firm and stable.
6. Check Stability: After tightening, gently rock the stool to ensure it is stable and does not wobble. If wobbling occurs, loosen screws slightly, adjust, and re-tighten.

5. Operating and Usage

The MAHANCRIS Bar Stools are designed for comfortable seating at counter height surfaces. Their versatile design allows them to be used in various home environments.

• Seating: Sit centrally on the saddle seat for optimal comfort and stability. The arc-shaped design is intended to relieve fatigue during prolonged sitting.
• Footrest Use: Utilize the footrests for added comfort and to maintain proper posture. The two height options allow for customization based on user preference.
  

  Image: A close-up demonstrating the dual-height footrest feature for enhanced comfort.
• Placement: These stools are ideal for kitchen islands, breakfast bars, home bars, or as additional seating in living areas.
  

  Image: MAHANCRIS bar stools used as seating at a console table, demonstrating their versatility in a living space.

6. Maintenance and Care

Proper maintenance will extend the life and appearance of your bar stools.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• Tightening Fasteners: Periodically check all screws and bolts and re-tighten them as needed to ensure the stool remains stable and secure.
• Floor Protection: The stools are equipped with pipe plugs to protect floors. Ensure these plugs are intact and in place to prevent scratching or damage to your flooring.
  

  Image: Detail of the pipe plugs on the stool legs, which prevent slipping and protect floor surfaces.

• Environmental Conditions: Do not place the stools in direct sunlight or near heat sources, as this may cause warping or fading of the materials.

7. Troubleshooting

8. Specifications

• Model: BABK0801 Bar Stools
• Dimensions (Overall): 15.7" L x 11.8" W x 23.7" H (40cm L x 30cm W x 60.2cm H)
• Seat Dimensions: 15.7" L x 11.8" W x 1.6" Thick
• Weight Capacity: 220 lbs (100 kg) per stool
• Material: High-quality Particleboard (seat), Sturdy Metal Frame (legs)
• Color: Black
• Style: Industrial
• Number of Pieces: 2
• Item Weight: Approximately 16.78 pounds (7.61 kg) per set
• Country of Origin: China

Image: Detailed dimensions and weight capacity of the MAHANCRIS bar stool.

9. Warranty and Support

For warranty information or product support, please contact MAHANCRIS directly. Details regarding specific warranty periods and conditions are typically provided with your purchase documentation or can be obtained by contacting customer service.

Contact Information:

• Brand Store: Visit the MAHANCRIS Store on Amazon
• Refer to your purchase invoice or product packaging for direct customer service contact details.