Introduction
This manual provides detailed instructions for the safe and efficient use of your VAXMAY Battery Powered Sprayer Wand. Please read this manual thoroughly before operating the device and retain it for future reference. This sprayer wand is designed for various gardening and cleaning tasks, offering convenience and versatility with its adjustable features and portable design.
Product Components
Your VAXMAY Battery Powered Sprayer Wand package includes the following components:
- Sprayer Handle with integrated battery and controls
- Telescopic Wand
- 26.2 FT (8M) Hose
- 4 Adjustable Nozzles (Fan, Cone, 6-Hole Pattern, F-Type Dual)
- Gravity Filter Head
- USB Type-C Charging Cable
Image: All components of the VAXMAY Battery Powered Sprayer Wand.
Setup
1. Initial Charging
The sprayer handle contains 2*2000mAh rechargeable batteries. Before first use, fully charge the device using the provided USB Type-C cable. A full charge takes approximately 3 hours and provides up to 3 hours of continuous use. The handle features a built-in battery indicator to monitor charge levels.
Image: Sprayer handle with battery indicator and Type-C charging port.
2. Assembling the Sprayer Wand
- Attach Nozzle: Select the desired nozzle and screw it onto the end of the telescopic wand until secure.
- Connect Telescopic Rod: Screw the telescopic rod into the electric sprayer handle.
- Connect Hose: Unscrew the nut from the handle's hose connection point. Thread this nut through the water hose first. Insert the water pipe end into the handle, then tighten the nut onto the handle to secure the hose connection.
- Attach Filter: Insert the gravity filter head onto the other end of the 26.2 FT hose. This filter helps remove impurities from the water source.
Image: Visual guide for assembling the sprayer wand components.
3. Video Guide: Installation
Video: A detailed guide on how to install the VAXMAY battery sprayer wand.
Operating Instructions
1. Preparing for Spraying
Place the filter end of the 26.2 FT hose into your desired water source (e.g., bucket, river, pool, tank). Ensure the filter is fully submerged and free from obstructions.
Image: Demonstrates the sprayer hose being used with different water sources.
2. Powering On and Adjusting Speed
Press the ON/OFF button on the handle to activate the sprayer. The handle features 3 adjustable speeds (I, II, III) to control the spray power. Press the 'Speed' button to cycle through the different intensity levels: Soft Spraying, Medium Spraying, and Strong Spraying. The battery indicator lights will show the remaining battery life.
Image: Illustrates the three adjustable spray intensities: Soft, Medium, and Strong.
3. Adjusting Nozzles
The sprayer wand comes with 4 adjustable nozzles: Fan Nozzle, Cone Nozzle, 6-Hole Pattern Nozzle, and F-Type Dual Nozzle. To change the spray pattern, simply twist the installed nozzle or replace it with another type as needed for your specific task.
Image: Displays the four types of adjustable nozzles and their spray patterns.
4. Using the Telescopic Wand
The telescopic wand extends from 8.66 inches to 32 inches, allowing you to easily reach tight or hard-to-access areas without bending or stretching excessively. Adjust the length by loosening the locking mechanism, extending the wand, and then tightening to secure.
Image: Retractable boom design of the sprayer wand, showing extended and retracted lengths.
5. Video Guide: Operation
Video: Demonstrates the VAXMAY Upgraded Battery Sprayer Wand in use with its 26.2 FT hose.
Maintenance
1. Cleaning the Filter
Regularly inspect and clean the gravity filter head to prevent clogs and ensure optimal performance. Remove the filter from the hose, rinse it thoroughly with clean water, and remove any debris. Reattach securely.
2. Cleaning the Nozzles and Wand
After each use, especially when spraying chemicals, rinse the nozzles and the telescopic wand with clean water to prevent residue buildup and clogging. Ensure all parts are dry before storage.
3. Storage
Store the sprayer wand in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the battery is partially charged (not fully depleted or fully charged for long-term storage) to prolong battery life.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No spray or weak spray | Low battery, clogged nozzle, clogged filter, kinked hose, air in pump. | Charge battery. Clean nozzle. Clean filter. Straighten hose. Ensure filter is fully submerged in water. |
| Sprayer turns on but no water comes out | Hose not properly connected, filter not submerged, severe clog in hose or pump. | Check all hose connections for tightness. Ensure filter is fully submerged. Disconnect hose and check for blockages. |
| Battery indicator not working | Battery completely depleted, internal electrical issue. | Attempt to charge the device. If issue persists, contact customer support. |
| Water leakage from connections | Loose connections, damaged O-rings or seals. | Tighten all connections. Inspect O-rings and seals for damage and replace if necessary. |
Specifications
- Brand: VAXMAY
- Model Number: SQ7.4VDXD-BK-8M
- Material: Composite
- Wand Length: 8.66 inches (retracted) to 32 inches (extended)
- Hose Length: 26.2 FT (8 meters)
- Battery: 2*2000mAh rechargeable (integrated)
- Charging Time: Approximately 3 hours
- Continuous Use Time: Up to 3 hours
- Pump Voltage: 7.4V
- Nozzles: 4 adjustable types (Fan, Cone, 6-Hole Pattern, F-Type Dual)
- Item Dimensions L x W x H: 12 x 12 x 3 inches (packaging)
Warranty and Support
Your VAXMAY Battery Powered Sprayer Wand comes with a worry-free 12-month warranty. For any questions, concerns, or assistance, please utilize our 7/24 online service. We are committed to providing support and ensuring your satisfaction with our product.