Kaiyodo Revoltech Amazing Yamaguchi: Attack on Titan - Armored Titan Action Figure Instruction Manual

Introduction

This manual provides essential information for the assembly, operation, and maintenance of your Kaiyodo Revoltech Amazing Yamaguchi Armored Titan Action Figure. Please read through these instructions carefully to ensure proper handling and to maximize the enjoyment of your figure.

Product Overview

The Kaiyodo Revoltech Amazing Yamaguchi Armored Titan Action Figure is a highly detailed and articulated collectible based on the character from the "Attack on Titan" series. It features a robust design with intricate detailing of the armored skin and exposed muscle fibers. The figure is engineered with advanced articulation points to allow for a wide range of dynamic poses, replicating scenes from the anime.

Figure Overview: The Armored Titan figure, highlighting its detailed sculpt and imposing stature.

Key features include:

• Highly articulated joints designed for extensive posing.
• Detailed sculpt capturing the metallic texture of the armored skin and muscle fibers.
• Interchangeable face parts for varied expressions.
• Multiple interchangeable hand and wrist parts for diverse gestures.

What's in the Box

Upon opening the package, please verify that all components are present:

• Armored Titan Action Figure (Main Body)
• Interchangeable Face Part (Open Mouth Expression)
• Interchangeable Wrist Parts (e.g., Open Hands, Grabbing Hands, Half-Open Hands)

Included Accessories: A selection of interchangeable hands and an alternate face part.

Setup

Your Armored Titan figure comes largely pre-assembled. The primary setup involves attaching and detaching interchangeable parts.

Attaching/Detaching Face Parts:

1. Gently hold the figure's head.
2. Carefully pull the default face part straight off the head. Avoid twisting or excessive force.
3. Align the desired interchangeable face part with the pegs on the head.
4. Gently push the new face part into place until it is securely seated.

Attaching/Detaching Hand Parts:

1. Gently pull the existing hand part straight off the wrist joint.
2. Align the desired interchangeable hand part with the peg on the wrist.
3. Gently push the new hand part onto the wrist peg until it is securely attached.

Note: Some joints may be stiff initially. Apply gentle, consistent pressure rather than sudden force. If a joint is too stiff, carefully warm it slightly with a hairdryer on a low setting for a few seconds (do not overheat) to loosen the plastic.

Operating (Articulation and Posing)

The Armored Titan figure features a wide range of articulation designed for dynamic posing. Explore the various joints to achieve desired stances.

• Shoulders: Designed to move back and forth, allowing for broad arm movements.
• Torso: Can bend deeply and slouch widely, enabling expressive body language.
• Hip Joints: Offer a wide range of motion while maintaining a seamless appearance.
• Shin Joints: Engineered to replicate the "bending" motion seen in the anime.

Dynamic Posing: The figure's articulation allows for a wide array of action poses.

Action Stance: An example of the figure in a powerful, forward-moving pose.

Always manipulate joints gently. Avoid forcing movements beyond their intended range to prevent damage.

Maintenance

Proper care will ensure the longevity and appearance of your action figure.

• Cleaning: Use a soft, dry cloth to gently wipe away dust. For stubborn dirt, a slightly damp cloth (water only) can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
• Storage: Store the figure away from direct sunlight, extreme temperatures, and high humidity, which can cause discoloration or material degradation.
• Joint Care: If joints become loose over time, a small amount of clear nail polish or a specialized joint-tightening fluid can be applied to the peg and allowed to dry before reassembly. If joints are too stiff, refer to the "Setup" section for warming instructions.

Troubleshooting

Specifications

Safety Information

This product is intended for collectors aged 15 years and up. It is not a toy and may contain small parts that pose a choking hazard to young children. Keep out of reach of children under 3 years of age.

Handle with care to avoid breakage. Do not expose to extreme temperatures or direct sunlight for prolonged periods, as this may damage the material or paint finish.

Warranty and Support

For information regarding warranty, returns, or product support, please refer to the retailer's policy where the product was purchased or contact Kaiyodo customer service directly. Contact details are typically available on the product packaging or the official Kaiyodo website.