TEKO Hover Scrubber Omni Electric Mop User Manual

1. Introduction

Thank you for choosing the TEKO Hover Scrubber Omni Electric Mop. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new electric mop. Please read this manual thoroughly before first use and retain it for future reference.

2. Safety Information

To reduce the risk of fire, electric shock, or injury, observe the following safety precautions:

• Read all instructions before using the appliance.
• Do not immerse the appliance in water or other liquids.
• Keep hair, loose clothing, fingers, and all parts of the body away from openings and moving parts.
• Use only as described in this manual. Use only manufacturer's recommended attachments.
• Do not use with a damaged cord or plug. If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Use extra care when cleaning on stairs.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
• Turn off all controls before unplugging.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

3. Package Contents

Verify that all items are present in your package:

• TEKO Hover Scrubber Omni Electric Mop Unit
• Adjustable Handle Assembly
• Baseboard Cleaner Attachment
• Washable Microfiber Pads (various types, e.g., plush, fine plush, abrasive sponge, polishing cloth)
• Charging Adapter
• User Manual (this document)

Image 3.1: Contents of the TEKO Hover Scrubber Omni Electric Mop package, including the main unit, handle, baseboard cleaner, and various cleaning pads.

4. Product Overview

Familiarize yourself with the components of your TEKO Hover Scrubber Omni Electric Mop.

• Main Unit: Houses the motor, battery, and dual counter-rotating heads.
• Handle: Adjustable for user comfort and reach.
• Dual Counter-Rotating Heads: Designed for scrubbing, mopping, and polishing.
• Microfiber Pads: Attach to the rotating heads for cleaning.
• Baseboard Cleaner Attachment: For cleaning edges and baseboards.

Image 4.1: The dual counter-rotating heads with various pad types for different cleaning tasks.

Image 4.2: The baseboard cleaner attachment, designed for cleaning edges and corners.

Image 4.3: The adjustable handle feature, allowing for customized height during use.

5. Setup

5.1 Assembly

1. Carefully unpack all components from the packaging.
2. Connect the handle sections by aligning and clicking them into place. Ensure they are securely fastened.
3. Attach the assembled handle to the main mop unit until it clicks securely.
4. Select the appropriate cleaning pads for your task and attach them to the bottom of the rotating heads. The pads are typically secured with hook-and-loop fasteners.
5. If using, attach the baseboard cleaner attachment to the designated port on the main unit.

5.2 Charging the Battery

The TEKO Hover Scrubber Omni is equipped with a rechargeable battery for cordless operation. Before first use, fully charge the device.

1. Locate the charging port on the main unit.
2. Connect the charging adapter to the charging port.
3. Plug the adapter into a standard electrical outlet.
4. Allow approximately 3 hours for a full charge. The indicator light will change to signify a full charge (refer to product specific indicator details if available).
5. A full charge provides up to 40 minutes of continuous runtime.

Image 5.1: Illustration of the charging process and battery runtime information.

6. Operating Instructions

6.1 Powering On/Off

• To turn on the mop, press the power button located on the handle.
• To turn off the mop, press the power button again.

6.2 General Cleaning

1. Ensure the appropriate cleaning pads are attached and moistened if necessary for wet mopping.
2. Turn on the device. The dual rotating heads will begin to spin.
3. Gently guide the mop across the floor surface. The counter-rotating action will scrub and polish.
4. The 360° rotatable head allows for easy maneuverability around furniture and into tight spaces.
5. For optimal results, move the mop slowly and steadily.

Image 6.1: The mop's flexible head design enables cleaning in hard-to-reach areas like under beds, sofas, and in corners.

6.3 Floor Compatibility

The Hover Scrubber Omni is suitable for a variety of hard floor surfaces, including:

• Hardwood
• Tile
• Laminate
• Linoleum
• Marble
• Polished Concrete
• Stone
• Cement
• Bamboo
• Vinyl

Always test on an inconspicuous area first, especially on delicate or newly installed flooring.

Image 6.2: Visual representation of the diverse floor types the mop can effectively clean.

6.4 Using the Baseboard Cleaner Attachment

For cleaning baseboards and tight corners:

1. Ensure the main mop unit is turned off.
2. Attach the baseboard cleaner attachment to the designated port.
3. Turn on the device.
4. Guide the attachment along baseboards or into corners to clean these areas.
5. Turn off the device and remove the attachment when finished.

7. Maintenance

7.1 Cleaning the Microfiber Pads

The cleaning pads are washable and reusable:

• After each use, remove the pads from the mop heads.
• Machine wash the pads with similar colors in cold water. Do not use bleach or fabric softener.
• Tumble dry on low heat or air dry. Ensure pads are completely dry before reattaching or storing.

Image 7.1: Overview of the machine washable mop attachments provided with the unit.

7.2 Cleaning the Mop Unit

• Wipe the main unit and handle with a damp cloth to remove any dirt or residue.
• Do not use harsh chemicals or abrasive cleaners.
• Ensure the unit is completely dry before storing.

7.3 Storage

• Store the mop in a cool, dry place away from direct sunlight.
• Ensure the battery is charged periodically if storing for extended periods to maintain battery health.

8. Troubleshooting

Refer to the following table for common issues and their solutions:

9. Specifications

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official TEKO website. Keep your proof of purchase for warranty claims.