Faumon S60 4K+1080p Dash Cam Instruction Manual

1. Introduction

Thank you for choosing the Faumon S60 4K+1080p Dash Cam. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new dash cam. Please read this manual thoroughly before use to ensure optimal performance and to enhance your driving safety.

Image 1.1: Overview of the Faumon S60 Dash Cam and its primary features.

2. Package Contents

Please check the package contents to ensure all items are present:

• Faumon S60 Dash Camera (Front)
• Rear Camera (12.68ft cable)
• Suction Mount
• Type-C Car Charger Cable (11.48ft)
• USB Car Charger
• User Manual
• Lens Cleaning Cloth
• USB Reader
• Card Needle
• 5M Adhesive Stickers
• Cable Hiding Clips
• Car Wire Trim Tool
• 64GB SD Card (inserted in dash cam)

Image 2.1: All items included in the Faumon S60 Dash Cam package.

3. Setup

3.1 Mounting the Dash Cam

1. Clean the area on your windshield where you intend to mount the dash cam.
2. Attach the suction mount to the dash cam.
3. Press the suction cup firmly against the windshield and lock it in place.
4. Adjust the dash cam angle for optimal front view recording.

3.2 Connecting Power

1. Connect the Type-C car charger cable to the dash cam's power port.
2. Plug the USB car charger into your vehicle's cigarette lighter socket.
3. Route the cable neatly along the edge of the windshield and dashboard using the provided cable hiding clips and trim tool.
4. Note: For GPS functionality, use the original car charger. If your car lacks a cigarette lighter port, you can use a data cable for power, but GPS will not function.

Image 3.1: Front camera installation and cable routing.

3.3 Installing the Rear Camera

1. Connect the rear camera cable to the AV input port on the main dash cam unit.
2. Route the rear camera cable from the front dash cam to the rear of your vehicle. You can tuck it along the headliner and side panels.
3. Mount the rear camera on your rear windshield using the adhesive, ensuring a clear view. Alternatively, it can be installed near the license plate.
4. For Parking Assistance: Connect the red reverse line on the rear camera extension cable to the positive pole of your vehicle's reverse light.

Image 3.2: Rear camera installation methods.

3.4 Memory Card

• The 64GB SD card is pre-inserted into the dash cam.
• Before first use, it is recommended to format the memory card via the dash cam settings.
• The dash cam supports 32GB-128GB cards with a 100MB/s writing speed.

3.5 App Installation & Connection

1. Download the companion app (e.g., "GKU GO" or "Elook APP" as suggested by images) from the App Store (iOS) or Google Play Store (Android).
2. Enable 5G WiFi on your dash cam.
3. Connect your smartphone to the dash cam's WiFi network.
4. Use the app to view, download, and share videos, and adjust settings.

Image 3.3: Connecting to the dash cam via 5G WiFi and the mobile app.

4. Operating Instructions

4.1 Recording Modes

• Loop Recording: The dash cam continuously records in 1/3/5 minute segments. When the memory card is full, it automatically overwrites the oldest unprotected files, ensuring continuous recording. Locked videos are not overwritten.
• G-Sensor: The built-in G-sensor detects sudden impacts, crashes, or bumps. Upon detection, it automatically locks the corresponding footage to prevent overwriting. It is recommended to set the G-sensor to the "low" sensitivity level to avoid locking unnecessary footage during normal driving.

Image 4.1: Loop recording ensures continuous video capture.

Image 4.2: G-Sensor automatically locks emergency recordings.

4.2 Parking Monitor

The 24-hour parking monitor provides constant surveillance when your car is turned off. With built-in motion detection, the dash cam will automatically record important moments if movement or collision is detected. A hardwire kit (not included) is needed for continuous 24-hour parking monitoring.

Image 4.3: 24-hour parking monitor with time-lapse and G-sensor.

4.3 Night Vision / WDR

The dash cam features a large F2.0 aperture with 4 IR LEDs and a Sony IMX335 Image Sensor, enabling clear image capture in low light conditions. Superior HDR/WDR technology balances exposure for clear shots day or night, reducing blind spots and enhancing night driving safety.

Image 4.4: Super Night Vision and WDR technology for enhanced clarity.

4.4 GPS Functionality

The built-in GPS records your driving route, real-time speed, and location, providing additional evidence if an accident occurs. Ensure you use the original car charger for GPS function.

Image 4.5: GPS Route Tracking for detailed driving data.

4.5 App Control

The mobile app allows you to easily view, download, and share videos from your dash cam via 5G WiFi. You can also adjust various settings directly from your smartphone.

4.6 Parking Assistance

The rear camera provides a clear rear view and parking guide lines when the reverse gear is engaged, assisting with parking maneuvers. The red reverse line on the extension cable of the rear camera should be connected to the positive pole of the reverse light for this feature.

Image 4.6: Parking assistance with rear camera view.

5. Maintenance

5.1 Formatting Memory Card

It is crucial to format the memory card before its first use and periodically thereafter to ensure optimal performance and prevent data corruption. This can typically be done through the dash cam's settings menu or via the mobile app.

5.2 Cleaning

Use the provided lens cleaning cloth to gently wipe the camera lenses. Avoid using abrasive materials or chemical cleaners that could damage the lens coating.

6. Troubleshooting

• Dash cam not powering on: Ensure the car charger is properly connected to both the dash cam and the vehicle's cigarette lighter. Check if the vehicle's power outlet is functioning.
• GPS not working: Verify that the original Faumon car charger is being used, as it is required for GPS functionality. Ensure the vehicle is in an open area with clear sky view.
• Memory card full / recording stopped: Format the memory card regularly. Adjust G-sensor sensitivity to 'low' to prevent unnecessary locking of files.
• WiFi connection issues: Ensure 5G WiFi is enabled on the dash cam and your smartphone is within range. Restart both devices and try connecting again.
• Poor video quality: Ensure lenses are clean. Check video resolution settings in the app.

7. Specifications

8. Warranty and Support

For any product inquiries, technical assistance, or warranty claims, please refer to the contact information provided in your product packaging or visit the official Faumon store on Amazon. We are committed to providing reliable support for your dash cam.