1. Introduction
This manual provides essential information for the proper use and maintenance of your replacement remote control. This remote is designed as a dedicated replacement for specific Audio/Video Players, TVs, AC units, and Projectors, including certain Bose Cinemate Solo Soundbar models (e.g., 714919-001S, 714543-1020). Please note that as a replacement unit, some functions may differ or not be available compared to the original remote control.
It is crucial to verify compatibility with your specific device model. If you are unsure, providing your original remote's part number or your unit's model number can help confirm suitability.
2. Product Overview
The replacement remote control is a compact and easy-to-operate device, constructed from durable ABS plastic. It offers stable performance and a far transmitting distance. The design focuses on essential controls for common audio/video functions.
Figure 2.1: Front view of the replacement remote control. This image displays the layout of the buttons, including power, input selection, channel and volume controls, navigation pad, and numeric keypad.
Figure 2.2: Front and back view of the replacement remote control. This image highlights the ergonomic shape of the remote and provides a glimpse of the battery compartment on the rear.
Key Features:
- Dedicated replacement remote control.
- No programming or setup required for basic functionality.
- Durable ABS plastic construction.
- Stable performance and extended transmitting distance.
- Compact and user-friendly design.
3. Setup
3.1 Battery Installation
The remote control requires batteries for operation. No programming or complex setup is needed; simply install new batteries to begin using the remote.
- Locate the battery compartment on the back of the remote control.
- Slide open the battery compartment cover.
- Insert the required batteries (typically AAA, not included) according to the polarity indicators (+ and -) inside the compartment.
- Close the battery compartment cover securely.
Note: Ensure batteries are inserted correctly to avoid damage to the remote control. Replace batteries when the remote's performance degrades.
4. Operating Instructions
This replacement remote control is designed to function immediately upon battery installation for compatible devices. It is pre-configured for the specified models, eliminating the need for manual programming.
4.1 Basic Operation
- Power Button: Press to turn your device (TV, Soundbar, Projector) on or off.
- Volume Control: Use the + and - buttons to adjust the volume level.
- Channel Control: Use the CH+ and CH- buttons to change channels (for TV).
- Navigation Pad (Arrow Buttons and OK): Use the arrow buttons to navigate menus and the OK button to confirm selections.
- Input/Source: Press the Source or Input button to cycle through available input sources on your device.
- Numeric Keypad: Use the number buttons (0-9) for direct channel entry or other numerical inputs.
For specific functions related to your original device, refer to your device's original user manual. This replacement remote aims to cover the most commonly used functions.
5. Troubleshooting
If you encounter issues with your replacement remote control, please refer to the following common troubleshooting steps:
- Remote Not Responding:
- Check if the batteries are inserted correctly with the correct polarity.
- Replace old or depleted batteries with new ones.
- Ensure there are no obstructions between the remote control and the device's infrared receiver.
- Make sure you are within the effective operating range of the device.
- Some Functions Not Working:
- As a replacement remote, it may not support all advanced or specific functions of your original device's remote. This is not indicative of a defect.
- Verify that the function you are trying to use is a standard function typically found on universal or replacement remotes.
- Consult your device's original manual to confirm if the function requires a specific remote code or unique button.
- Intermittent Operation:
- Weak batteries can cause intermittent operation. Replace them.
- Ensure the remote's infrared emitter is clean and free from dust or debris.
6. Specifications
| Brand | Generic |
| Model Numbers | 714919-001S, 714543-1020 (Compatible) |
| Material | ABS/Plastic |
| Compatible Devices | Audio/Video Players, TV, AC, Projector (e.g., Bose Cinemate Solo Soundbar) |
| Max Number of Supported Devices | 1 (Dedicated Replacement) |
| Special Feature | Digital Display (if applicable, based on original remote) |
| Color | Black or White (Color may vary) |
7. Maintenance
Proper care and maintenance will extend the lifespan of your remote control:
- Cleaning: Use a soft, dry cloth to clean the remote's surface. Do not use liquid cleaners or abrasive materials.
- Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: Remove batteries if the remote will not be used for an extended period to prevent leakage.
- Handling: Avoid dropping the remote or exposing it to excessive force, as this can damage internal components.
8. Support
For further assistance or inquiries regarding compatibility with your specific device model, it is recommended to contact the seller or manufacturer with your original remote's part number or your unit's model number. This information will help in providing accurate support.
This product is manufactured by REMOTE NK store.
